9.0 and setup fields for MOSAIQ
Larry Slate
Phelan, David
It’s easy to make orthogonal fields manually in Mosaic. Then just associate the DRR’s with the manually created fields.
David Phelan, RT(T), CMD
Clackamas Radiation Oncology
Dosimetry/Physics Dept.
9280 SE Sunnybrook Blvd., Ste. 100
Clackamas, OR 97015
--
You received this message because you are subscribed to the Google
Groups "pinnacle3-users" group.
To post to this group, send email to pinnacl...@googlegroups.com
To subscribe to this group, send email to
pinnacle3-us...@googlegroups.com
To unsubscribe from this group, send email to
pinnacle3-use...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/pinnacle3-users?hl=en
This message is intended for the sole use of the addressee, and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you are not the addressee you are hereby notified that you may not use, copy, disclose, or distribute to anyone the message or any information contained in the message. If you have received this message in error, please immediately advise the sender by reply email and delete this message.
Natlie duCille
I've noticed when we installed the pre-release version of 9.0 the orthogonal fields did not go over to Mosaiq. Now that we have the "real" version of 9.0 the fields show up on Mosaiq for import. Maybe that will help.
Guidi Gabriele
Yes, the orthogonal show up, but there are few bugs highlighted
1. If you have more than one trials, the orthogonal will show up with the same Field ID
2. The isocenter/machine is manual defined by the operator, so if the operator make a mistake during sending, than you will reposition the patient in a wrong direction
3. If you have more than one trial for the same patients (e.g. 50gy/25fx + 10Gy/5fx) you will send 4 orthogonal field ( 2 planar images and field for each trial), but you have to be carefully during the import in Mosaiq, because the orthogonal will have same ID field
Something easy to patch by Philips, but I’m not sure they will do immediately, especially the second point should be automatic and they should export the correct dose prescribed, as it was with Lantis 10 years a go.
Lele
----------------------------------------------------------
Gabriele Guidi
Medical Physics Dpt.
Az.Ospedaliero-Univeristaria di Modena
Via del Pozzo 71, 41110 Modena (Italy)
Phone: +39 059 422 5699
Ext: +39 059 422 4270
email: guidi.g...@policlinico.mo.it
"..Id est quod monasterium largit..."
The Hospital Server locks any *.zip, *.exe file or files >14MB
Please try to contact me via phone or to my private email
Da: pinnacl...@googlegroups.com [mailto:pinnacl...@googlegroups.com] Per conto di Natlie duCille
Inviato: giovedì 22 settembre 2011 1.15
A: pinnacl...@googlegroups.com
Oggetto: Re: [p3rtp] 9.0 and setup fields for MOSAIQ
Larry Slate
Natlie, what do you mean by the real version of 9.0? I have done a lot of investigation about the setup fields and Pinnacle even confirmed that this is a bug in 9.0. How are you getting setup fields to come over? Did you write a script maybe?
Leach, Karla
I made a script to add setup fields in Pinnacle then I export those to Mosaiq. Then the fields and Drr’s are exported. Just make sure you have the correct iso selected when you add the fields with the script. It’s a lot faster than adding fields in Mosaiq.
Karla Leach, CMD
Augusta Health Cancer
Center
540-245-7208
KLe...@AugustaHealth.com
KRISTI HENDRICKSON
Thanks,
Kristi
On Fri, 23 Sep 2011, Leach, Karla wrote:
>
> I made a script to add setup fields in Pinnacle then I export those to Mosaiq. Then the fields and DrrοΏ½s are
> exported. Just make sure you have the correct iso selected when you add the fields with the script. ItοΏ½s a lot
> faster than adding fields in Mosaiq.
>
> οΏ½
>
> Karla Leach, CMD
> Augusta Health Cancer Center
> 540-245-7208
> KLe...@AugustaHealth.com
>
>
> ________________________________________________________________________________________________________________
>
>
> From: pinnacl...@googlegroups.com [mailto:pinnacl...@googlegroups.com] On Behalf Of Larry Slate
> Sent: Wednesday, September 21, 2011 2:33 PM
> To: 'pinnacl...@googlegroups.com'
> Subject: [p3rtp] 9.0 and setup fields for MOSAIQ
>
> οΏ½
>
> We changed from 8.0 to 9.0 and found out that setup fields do not come over to MOSAIQ, only the drrοΏ½s.οΏ½ What are
> people doing to muddle through this until 9.2?
>
> οΏ½
>
> Larry Slate
>
> Bozeman Deaconess Cancer Center
>
> 931 Highland Blvd Suite 3130
>
> Bozeman MTοΏ½ 59715
>
> (406) 522-1626
>
> οΏ½
>
> οΏ½
_______________________________
Kristi Hendrickson, PhD, DABR
Medical Physicist
Dept of Radiation Oncology
University of Washington Medical Center
1959 NE Pacific St
Box 356043
Seattle WA 98195
(206) 598-6259 office phone
(206) 797-0182 pager
The above email may contain patient identifiable or confidential
information. Because email is not secure, please be aware of associated
risks of email transmission. If you are a patient, communicating to a UW
Medicine Provider via email implies your agreement to email
communication; see http://www.uwmedicine.org/Global/Compliance/EmailRisk.htm.
The information is intended for the individual named above. If you are
not the intended recipient, any disclosure, copying, distribution or use
of the contents of this information is prohibited. Please notify the
sender by reply email, and then destroy all copies of the message and
any attachments. See our Notice of Privacy Practices at
www.uwmedicine.org.
Dozler, Cheryl
Cheryl
-----Original Message-----
From: pinnacl...@googlegroups.com [mailto:pinnacl...@googlegroups.com] On Behalf Of KRISTI HENDRICKSON
Sent: Friday, September 23, 2011 1:25 PM
To: pinnacl...@googlegroups.com
Subject: RE: [p3rtp] 9.0 and setup fields for MOSAIQ
Do we know this will be fixed in 9.2?
Thanks,
Kristi
On Fri, 23 Sep 2011, Leach, Karla wrote:
>
> I made a script to add setup fields in Pinnacle then I export those to Mosaiq. Then the fields and Drr's are
> exported. Just make sure you have the correct iso selected when you add the fields with the script. It's a lot
> faster than adding fields in Mosaiq.
>
>
>
> Karla Leach, CMD
> Augusta Health Cancer Center
> 540-245-7208
> KLe...@AugustaHealth.com
>
>
> ________________________________________________________________________________________________________________
>
>
> From: pinnacl...@googlegroups.com [mailto:pinnacl...@googlegroups.com] On Behalf Of Larry Slate
> Sent: Wednesday, September 21, 2011 2:33 PM
> To: 'pinnacl...@googlegroups.com'
> Subject: [p3rtp] 9.0 and setup fields for MOSAIQ
>
>
>
> We changed from 8.0 to 9.0 and found out that setup fields do not come over to MOSAIQ, only the drr's. What are
> people doing to muddle through this until 9.2?
>
>
>
> Larry Slate
>
> Bozeman Deaconess Cancer Center
>
> 931 Highland Blvd Suite 3130
>
> Bozeman MT 59715
>
> (406) 522-1626
_______________________________
Natlie duCille
The "real" version was a separate set of cds that Philips sent, in essence, the released version of 9.0. Perhaps it is a bug and I do not have a script for it. I just export as normal, like how things were done with 8.0m.
When you changed over to 9.0, did you get any assistance from applications support? There are things that they did with the database and other things that worked out "better than expected" with the transition. I wish I could remember the gentleman's name. What he did for me with the transition went so well that I didn't experience any other issues.
I wonder if it has to do with the need to update your IP address, AE titles and DICOM in Pinnacle and the Mosaiq IMPAC_RTP destination.
> Natlie, what do you mean by the real version of 9.0? I have done a lot of investigation about the setup fields and Pinnacle even confirmed that this is a bug in 9.0. How are you getting setup fields to come over? Did you write a script maybe?
>
> From: pinnacl...@googlegroups.com [mailto:pinnacl...@googlegroups.com] On Behalf Of Natlie duCille
> Sent: Wednesday, September 21, 2011 5:15 PM
> To: pinnacl...@googlegroups.com
> Subject: Re: [p3rtp] 9.0 and setup fields for MOSAIQ
>
>
> I've noticed when we installed the pre-release version of 9.0 the orthogonal fields did not go over to Mosaiq. Now that we have the "real" version of 9.0 the fields show up on Mosaiq for import. Maybe that will help.
>> We changed from 8.0 to 9.0 and found out that setup fields do not come over to MOSAIQ, only the drr's. What are people doing to muddle through this until 9.2?
>>
>> Larry Slate
>> Bozeman Deaconess Cancer Center
>> 931 Highland Blvd Suite 3130
>> Bozeman MT 59715
>> (406) 522-1626
>>
>>
>> This communication is confidential to Bozeman Deaconess Hospital and is intended solely for the use of the individual or organization to whom it is addressed. It may contain privileged information. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you should not use, copy, alter, or disclose the contents of this message. All information or opinions expressed in this message and/or any attachments are those of the author and are not necessarily those of Bozeman Deaconess Hospital. Bozeman Deaconess Hospital accepts no responsibility for loss or damage arising from its use.
>>
>> --
>> You received this message because you are subscribed to the Google
>> Groups "pinnacle3-users" group.
>> To subscribe to this group, send email to
>> To unsubscribe from this group, send email to
>> For more options, visit this group at
>> http://groups.google.com/group/pinnacle3-users?hl=en
> --
> You received this message because you are subscribed to the Google
> Groups "pinnacle3-users" group.
> To subscribe to this group, send email to
> To unsubscribe from this group, send email to