What about Bootloader V3.00 for 2550 card

[furri]

Hi, i just recover my old Pinguinos for a workshop, i'm happy to see how this project is growing.

I must to use Pinguino ARDE version with pic18f2550, now i have installed this bootloader4550V2-12.hex (found in an old folder of my computer)
i supose that is identical to this one:
bootloaderV2.12_PIC18Fx550.hex (from pinguino website)

the card is running fine, i just install IDE X.4 and check some samples incluiding CDC... wonderful

My question now is.... what about bootloader 3.00, i install and i cant upload any program to the card and... in IDE configuration i can select bootloader 1.x, 2.x and 4.x... not 3.x... whats the reason?

Thanks.

furri

[agentric]

Don't try to use bootloader3. It has never been operational. But with IDE x4 you can use V2.12 or V4.8. Thru "board select" icon you choice  your installed boot.

André

[furri]

thanks...  this answer makes me to be more questions,
¿where can i download V4.8?... if you go to pinguino.cc, click in Downloads and click in Bootloader you get this

http://www.pinguino.cc/download/bootloader/8-bit/

The latest version is V4.2 and nothing says to me that is compatible with 2550.... Is compatible?

thanks again.

2013/8/18 agentric <andre....@wanadoo.fr>

--
Vous recevez ce message, car vous êtes abonné au groupe Google Groupes Pinguino.
Pour vous désabonner de ce groupe et ne plus recevoir d'e-mails le concernant, envoyez un e-mail à l'adresse pinguinocard...@googlegroups.com.
Pour envoyer un message à ce groupe, adressez un e-mail à pingui...@googlegroups.com.
Visitez ce groupe à l'adresse http://groups.google.com/group/pinguinocard .
Pour plus d'options, visitez le site https://groups.google.com/groups/opt_out .

[agentric]

There is several means to get bootv4.8.

Here : https://code.google.com/p/pinguino32/source/browse/

or try easypack to install a recent IDEx4. Find information on easypack at http://forum.pinguino.cc/.

When the IDE will be installed open the folder extra\bootloaders\8bits to select a fitting boot.

André

Le dimanche 18 août 2013 00:13:20 UTC+2, furri a écrit :

[furri]

The "extra\bootloaders\8bits" is the solution.... the worse thing is that i can't give pinguino.cc link to my pupils... i'll must specify where to get each thing...

thanks a lot.

2013/8/19 agentric <andre....@wanadoo.fr>

[furri]

Same problem with I/O mapping... ¿where is the schematics for 18F45k50 or 18F26J50?

2013/8/19 furri <furr...@gmail.com>

[agentric]

The I/O mapping for 18F45k50 is the same as for 18f4550.
The I/O mapping for 18F26j50 is the same as for 18f2550 except that pin18 (ref Pinguino numbers) doesn't exist on 18f26j50 (pin Microchip #6 = VDDCORE/VCAP). Refer to the 26j50 datasheet to know exactly each function pin !!!

[furri]

I have some samples of 18f25k50, i'll check it. thanks

2013/8/19 agentric <andre....@wanadoo.fr>