PIK-20B worn our rear wing pin positioning sleeve - size & drawing wanted

[László Szarka]

Dear All,

My flight mate in LHOY has a completely same PIK20B as mine.

Now he faces the abovementioned problem with too much slop in the rear sleeves on the wing side that embraces the cro-molly wing pin joints. 

It seems to be clear that the two parts for R -  L should be remanufactured.

Can you please advise on the exact size and materials?

Furthermore, there should be a drawing on that, namely the No. 402 according to Traficom website list but that one is missing from the download area. 

This might be crucial to showcase for the authority after accomplishing the CRS successfully.

So, do you eventually have the drawing 402 (or in case the Carbon Pik 20, 1010 or 1011)  ?

Thank you in advance,

Regards,

Laszlo

[Riku Rissanen]

Hi, 

If the drawing is nro 402, we can ask it from Traficom I think.

Rgds 

Riku

---

From: pi...@googlegroups.com <pi...@googlegroups.com> on behalf of László Szarka <mindstor...@gmail.com>
Sent: Monday, January 19, 2026 2:40 PM
To: PIK20 <pi...@googlegroups.com>
Subject: [PIK20] PIK-20B worn our rear wing pin positioning sleeve - size & drawing wanted

 

--
Visit the website at https://sites.google.com/view/pik20/ for files and archives
---
You received this message because you are subscribed to the Google Groups "PIK20" group.
To unsubscribe from this group and stop receiving emails from it, send an email to pik20+un...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/pik20/7cd48297-1554-4fad-b574-b1aac887c4e1n%40googlegroups.com.