PiDP-8

Steve Brilliant - much appreciated Peter --- Original message --- Subject: Re: [pidp8] Loading Basic

Thanks, I'll have a poke around the distributed TSS/8 file system and some of the online

Ok. Something is definitely not right here. Back when I worked through all the scope/noscope ucase/

On Saturday, October 15, 2022 at 10:14:08 AM UTC-6 andrewjam...@gmail.com wrote: The figure for

Hi Steve, Your recipe dug me out of the hole I was in. Thanks for the pointer to the Programming

On Wednesday, October 12, 2022 at 12:18:54 PM UTC-6 andrewjam...@gmail.com wrote: os8-cp isn't on

Dear All, Ooops, just seen the above. Sorry Steve, duplicate suggestion!!!! BW, Ian. On Saturday,

According to my tests, as SIMH is starting up it sets address 0100 into the Program Counter, so it

In the end, I think my issue was a combination of compression software and bad micro sd reader. I

On Wednesday, September 14, 2022 at 5:33:39 PM UTC-6 k1mu....@gmail.com wrote: Use the paper tape

The SET command is specific to versions of OS/8. Can you paste in the start-up message you get that

Dear Mike, No problem. Altering the keys is easy to do in vc8_remote.c. Make sure you match the keys

Updated information: I have the Pi Console up and running a getty shell on the VT-220 (as 9600 baud).

You're welcome! And now you have two spare USB-serial adapters that you could use , eg to connect

I am admitting defeat on this 8.25 thing. I have tried many things. First attempt was just to insert

Thanks Warren, I wasn't aware that this problem had been sorted out. The source I used for

Sorry, but it has found a (local) home. Thanks for the response. On Saturday, July 16, 2022 at 3:24:

Good to know...... : ) On Sunday, January 2, 2022 at 8:29:25 PM UTC-6 k1mu....@gmail.com wrote: Steve

Thx for the link HBE. Very cool. I have seen other projects using Arduino/Raspberry P, but with leds/

I guess one of the most important functions of an open source software repository and development

This is sold - thanks all! On Sun, May 15, 2022 at 4:15 PM David Goncalves <davegoncalves@gmail.

Awesome, I would like on also. On 5/20/2022 10:14 AM, AndyB wrote: That is awesome... i need one! On

Don't worry about heat...even if SIMH would somehow run at 100% CPU (and it doesn't on a Pi4(

On Saturday, April 16, 2022 at 4:03:19 PM UTC-6 mon...@gmail.com wrote: password: edsonDeCastrol1968

I'd actually be more interested in getting a PDP-12 or even a PiDP-12. That's the machine I

Subject: PiPD-8/I Deposit Switch Reversal From: Mike Katz Date: 3/21/2022, 4:24 PM To: Robert Evans

It was a stupid mistake on my part. The whole PiDP-8/I panel is working now. I just have to figure

An oldie, but goodie. Posted today on Twitter by Women Who Code. https://twitter.com/WomenWhoCode/

The heat shrink is really a great trick! Just a centimeter on each top edge gives a remarkable result

Hello Steve, Thanks for your valuable feedback. Highly appreciated! With the second link I was able