pHduino

Hi, I found the Sparky's Widget blog. There we can see some purposes for pH monitoring. One of

Hi Friends, I have a friend in Brazil, prof. Gutz (the same prof. that developed the CurtiPot

VSENSE é uma saída analógica caso alguém queria ligar um multímetro ou um conversor AD de resolução

Hi guys, I wrote a post about a plunger pump that I extract from the Dettol No Touch Hand Wash System

It works very well from pH 4 up to 10. I suggest you check your circuit out. For the calibration, you

Mike Michael Rightmire 408-890-2121 (Skype) +49-176-7131-8758 Right...@UTR.Net > You can use any

Acho que o projeto é um tanto complexo para montar em protoboard. Em Sáb, 2012-09-22 às 08:30 -0700,

Hi friends, I wrote a post about a chatbot to control the pHduino or other device using an Instant

http://code.google.com/p/phduino/wiki/PartList Carlos A. Neves 2012/6/16 vorfan <vor...@gmail.com

Hello, Your information was very helpful, thank you! :) Basically my "problem" was that I

Hi Craig, Sorry about the delay. First, I need to say that I am not responsible if someone promote

Thank you Sotisanis. http://code.google.com/p/phduino/wiki/pYpHpoTManual Carlos A. Neves 2012/3/19

2012/3/12 sotisanis sotisanis <soti...@gmail.com> hello please tell me, who is the model for

thank you very much!!!!!!!!! it's ok!!!!! thank you very very much!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Hi Thomas, The pH/ORP Adapter you are mentioning looks very nice indeed. Looking at the picture it

2011/11/9 ArduinoPete <trevor....@gmail.com> That charge pump worked fine breadboarded per

It's on my TODO list for this year, to create a pHduino version in Kicad. I have redone the

Curtis, I am sorry to say that I don't want my name, using the pHduino v0.2 layout, in a

Thank a lot Carlos On Tue, Mar 29, 2011 at 8:05 AM, Carlos Neves <can...@gmail.com> wrote:

The both options. You can check the symmetric power voltage and you can use it to power another

The picture of my wiring On 18 March 2011 01:21, Bostjan Sagadin <bostjan...@gmail.com>

Good job. Thanks. Carlos A. Neves SMILES: CN1C=NC2=C1C(=O)N(C(=O)N2C)C 2011/3/17 fco <fdulanto@

2011/1/22 PiperPilot <cp...@wingsnwakes.com> Hi, I am getting ready to build a phduino. I have

Take a look at the Calibration section. I think it will help you. http://code.google.com/p/phduino/

Hi guys. The pHduino Datalogger software and hardware are an extention of the pHduino project. The

I forgot to add the drill file. I included two drill files (mm and inch) to simplify the operator.

Hi Andres, I am not selling this shield by two reasons: (1) I used a Eagle version that I can not

I am looking for the same. I have found a few sources of controller board fabricators, but don't

I forgot to say that is necessary the pyserial python module. This module makes the serial

Changelog v04_20100421 * Removed duplicated unsigned word from readADC function. * Added magic number