Canon Service Tool V5103 Keygen

[Chris Richard]

Hellothanks for all the information, but the matching between the printer and the software appears not so clear. Could you give me the right tool to reset a Canon MG5650 printer? Is it the Canon Service Tool V3400? Or the Canon Service Tool V5103 (as indicated by the page title)?

NB : I already tried with the V3400 tool with my PC Windows 10, 64 bits: with the printer connected with an USB cable, turned on (5B00 error indicated), the fields of the "Service tool v3400.exe" window appear in black and can be selected, but I remain with the 006 error (printer not in service mode). Once the printer is switched into service mode, all buttons becomes grey and cannot be activated.

An alternative solution ?

Added note : I also tried with an old reactivated PC XP windows 32 bits, with the very same conclusion: Canon Service Tool V3400 activated in black with the MG5650 printer USB connected and printer on (but 006 error), fields of the window turn in grey and become inactive when the printer is toggled in the service mode.

@Admin,

Thanks a lot for the answer. Yes I tried with ST5103.exe, with the very same result :

The fields are in grey when the printer is not connected.

They turn in black and active when the printer is connected to the PC (but with the 006 error when I try an action).

The fields turn back to grey and inactive, when I toggle the printer to the service mode.

Some other idea to reset the 5B00 error on my PIXMA MG5650 printer ?

Thanks a lot for the answer. Yes, I tried with ST5103.exe, with the very same result:

The fields are in grey when the printer is not connected. They turn in black and active when the printer is connected to the PC (but with the 006 error when I try an action).

The fields turn back to grey and inactive when I toggle the printer to the service mode.

Some other idea to reset the 5B00 error on my PIXMA MG5650 printer?

Is it also possible to reset the error manually on the MG5620 printer (without any software tool, like for the G4200: -to-fix-error-code-5b00-on-canon.html)

Thanks !

error code: 002 appears, it means that the Service Tool does not support the requested command. The conclusion is that not all buttons in the Service Tool can be used, so just ignore this error message and then select a function key that is supported by the Service Tool.

If you are looking for a service tool that would reset the counter for the waste ink absorber pads please be advised that tool is not on the Canon website. The service tool is used by printer repair facilities that replace the waste ink absorber and reset the counter.

3a8082e126