Corvair Engine - JD pulley

[Scott VanderVeen]

FY -

I have posted to the Corvair list about these.  If you are planning on running a Corvair for the PC then you will need a larger pulley. 

You can do it yourself or buy one.

 

---------------------

 

So far we have 12 requests for these.  Need an order for 20 to run it. 

These pulleys are CNC'd for $32.00 each.  Delivery in 2 weeks once main order is placed.  Made in USA.

 

If you are planning to use the JD dynamo on the rear of the engine, driven from the harmonic balancer, then a larger pulley is required to
reduce the rpm so that it supplies the correct voltage.  Without changing the pulley the generator can supply a higher voltage than is required and
ruin equipment.  If you run it from a WW gold hub then the pulley change is not required.

 

Personal Cruiser, and Cleanex would use it along with others.

Contact off list at sc...@pro-composites.com if serious about acquiring
them.

 

Scott V.

[David Voit]

Scott:

Is that pulley the vibration dampener?

David Voit

---

From: Scott VanderVeen <sc...@pro-composites.com>
To: personal-cru...@googlegroups.com
Sent: Thu, May 6, 2010 7:28:14 AM
Subject: Corvair Engine - JD pulley

[Bryon Stewart]

I believe the pulley mounts on the JD generator which is driven off the harmonic balancer.

 

Bryon

---

From: David Voit <dv...@pacbell.net>
To: personal-cru...@googlegroups.com
Sent: Thu, May 6, 2010 9:22:50 AM
Subject: Re: Corvair Engine - JD pulley