install problem with Crypt::SSLeay

[Les]

Hello,


I am trying to install Crypt::SSLeay and am having problems getting it to
work. I had this running with Perl 5.8 and then upgraded my cygwin to 5.10
a month or so ago. Reinstalled openssl and that seemed to go fine. I have a
self-signed certificate, that was newly generated. Crypt:SSLeay won't pass
its tests. I don't have any idea what it wrong.

Any help would be greatly appreciated.

Les


The output of the CPAN install attempt is shown below:



cpan[2]> clean Crypt::SSLeay
CPAN: Storable loaded ok (v2.18)
Going to read '/home/Les/.cpan/Metadata'
Database was generated on Mon, 01 Jun 2009 04:27:10 GMT
CPAN: LWP::UserAgent loaded ok (v5.813)
CPAN: Time::HiRes loaded ok (v1.9715)

I would like to connect to one of the following sites to get
'authors/01mailrc.txt.gz':

http://www.perl.org/CPAN/
ftp://ftp.perl.org/pub/CPAN/

Is it OK to try to connect to the Internet? [yes]
Fetching with LWP:
http://www.perl.org/CPAN/authors/01mailrc.txt.gz
CPAN: YAML loaded ok (v0.66)
Going to read '/home/Les/.cpan/sources/authors/01mailrc.txt.gz'
Going to read 10 yaml files from /home/Les/.cpan/build/
............................................................................
DONE
Restored the state of 9 (in 0.8750 secs)
............................................................................
DONE
Fetching with LWP:
http://www.perl.org/CPAN/modules/02packages.details.txt.gz
Going to read '/home/Les/.cpan/sources/modules/02packages.details.txt.gz'
Database was generated on Wed, 03 Jun 2009 01:29:51 GMT
............................................................................
DONE
Fetching with LWP:
http://www.perl.org/CPAN/modules/03modlist.data.gz
Going to read '/home/Les/.cpan/sources/modules/03modlist.data.gz'
............................................................................
DONE
Going to write /home/Les/.cpan/Metadata
Running clean for module 'Crypt::SSLeay'
Running make clean
rm -f \
*.a core \
SSLeay.c core.[0-9] \
blib/arch/auto/Crypt/SSLeay/extralibs.all core.[0-9][0-9] \
SSLeay.bso pm_to_blib.ts \
core.[0-9][0-9][0-9][0-9] SSLeay.x \
SSLeay.bs perl.exe \
tmon.out *.o \
pm_to_blib blib/arch/auto/Crypt/SSLeay/extralibs.ld \
blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
*perl.core core.*perl.*.? \
Makefile.aperl perl \
SSLeay.def core.[0-9][0-9][0-9] \
mon.out libSSLeay.def \
perlmain.c perl.exe \
so_locations SSLeay.exp
rm -rf \
test.config crypt_ssleay_version.h \
blib
mv Makefile Makefile.old > /dev/null 2>&1
DLAND/Crypt-SSLeay-0.57.tar.gz
/usr/bin/make clean -- OK

cpan[3]> install Crypt::SSLeay
Running install for module 'Crypt::SSLeay'
Running make for D/DL/DLAND/Crypt-SSLeay-0.57.tar.gz

CPAN.pm: Going to build D/DL/DLAND/Crypt-SSLeay-0.57.tar.gz

Found multiple possibilities for OpenSSL
/usr (OpenSSL 0.9.8)
/usr/local/ssl (OpenSSL 0.9.8)
Which SSL install path do you want to use? [/usr]

BUILD INFORMATION
================================================
ssl library: OpenSSL 0.9.8 in /usr
ssl header: openssl/ssl.h
libraries: -L/usr/lib -lssl -lcrypto -lgcc
include dir: -I/usr/include/openssl
================================================
Checking if your kit is complete...
Looks good
Note (probably harmless): No library found for -lgcc
Writing Makefile for Crypt::SSLeay
The test suite can attempt to connect to public servers
to ensure that the code is working properly. If you are
behind a strict firewall or have no network connectivity,
these tests may fail (through no fault of the code).

Do you want to run the live tests (y/N) ? [N] y
cp lib/Crypt/SSLeay/X509.pm blib/lib/Crypt/SSLeay/X509.pm
cp lib/Net/SSL.pm blib/lib/Net/SSL.pm
cp SSLeay.pm blib/lib/Crypt/SSLeay.pm
cp lib/Crypt/SSLeay/Conn.pm blib/lib/Crypt/SSLeay/Conn.pm
cp lib/Crypt/SSLeay/CTX.pm blib/lib/Crypt/SSLeay/CTX.pm
cp lib/Crypt/SSLeay/MainContext.pm blib/lib/Crypt/SSLeay/MainContext.pm
cp lib/Crypt/SSLeay/Err.pm blib/lib/Crypt/SSLeay/Err.pm
/usr/bin/perl5.10.0.exe /usr/lib/perl5/5.10/ExtUtils/xsubpp -typemap
/usr/lib/perl5/5.10/ExtUtils/typemap -typemap typemap SSLeay.xs >
SSLeay.xsc && mv SSLeay.xsc SSLeay.c
gcc -c -I/usr/include/openssl -DPERL_USE_SAFE_PUTENV -U__STRICT_ANSI__
-fno-strict-aliasing -pipe -I/usr/local/include -DUSEIMPORTLIB -O3
-DVERSION=\"0.57\" -DXS_VERSION=\"0.57\" "
-I/usr/lib/perl5/5.10/i686-cygwin/CORE" SSLeay.c
rm -f blib/arch/auto/Crypt/SSLeay/SSLeay.dll
g++ --shared -Wl,--enable-auto-import -Wl,--export-all-symbols
-Wl,--stack,8388608 -Wl,--enable-auto-image-base -L/usr/local/lib SSLeay.o
-o blib/arch/auto/Crypt/SSLeay/SSLeay.dll \
/usr/lib/perl5/5.10/i686-cygwin/CORE/libperl.dll.a -L/usr/lib
-lssl -lcrypto \

chmod 755 blib/arch/auto/Crypt/SSLeay/SSLeay.dll
test -s SSLeay.bs && cp SSLeay.bs blib/arch/auto/Crypt/SSLeay/SSLeay.bs && \
chmod 644 blib/arch/auto/Crypt/SSLeay/SSLeay.bs
make: [blib/arch/auto/Crypt/SSLeay/SSLeay.dll] Error 1 (ignored)
DLAND/Crypt-SSLeay-0.57.tar.gz
/usr/bin/make -- OK
Running make test
/usr/bin/perl5.10.0.exe "-MExtUtils::Command::MM" "-e" "test_harness(0,
'blib/lib', 'blib/arch')" t/*.t
t/00-basic........ok
t/01-connect......1/8
# Failed test 'Net::SSL->new'
# at t/01-connect.t line 25.
# SSL negotiation failed: at t/01-connect.t line 11
# at t/01-connect.t line 11
# ; at t/01-connect.t line 11
# ; at t/01-connect.t line 11
# ; at t/01-connect.t line 11
# Looks like you failed 1 test of 8.
t/01-connect...... Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/8 subtests
(less 7 skipped subtests: 0 okay)
t/02-live.........1/4 # config on cygwin
# ssl OpenSSL 0.9.8 in /usr
# lib -L/usr/lib -lssl -lcrypto -lgcc
# inc -I/usr/include/openssl
# cc gcc
t/02-live.........ok

Test Summary Report
-------------------
t/01-connect.t (Wstat: 256 Tests: 8 Failed: 1)
Failed test: 1
Non-zero exit status: 1
Files=3, Tests=24, 7 wallclock secs ( 0.06 usr 0.05 sys + 2.29 cusr 0.97
csys = 3.37 CPU)
Result: FAIL
Failed 1/3 test programs. 1/24 subtests failed.
make: *** [test_dynamic] Error 255
DLAND/Crypt-SSLeay-0.57.tar.gz
/usr/bin/make test -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
reports DLAND/Crypt-SSLeay-0.57.tar.gz
Running make install
make test had returned bad status, won't install without force
Failed during this command:
DLAND/Crypt-SSLeay-0.57.tar.gz : make_test NO

cpan[4]>