Canon Scanner K10486 Driver Free Download
Staci Mauger
This file is a TWAIN-compliant scanner driver for Canon color image scanner.
You can install the following items of the software:
ScanGear: The TWAIN-compliant scanner driver for Canon color image scanner.
IJ Scan Utility: The software that allows you to easily scan photos, documents, etc.
[Ver.1.01]
- [IJ Scan Utility]
A printer which can be specified as an output destination when the [Copy] button of the scanner is pushed is added.
- Windows 11 has been added as a supported OS.
- If the OS is upgraded with the scanner driver remained installed, scanning by pressing the SCAN button on the product may not be performed After the upgrade. in such cases, re-install the scanner driver.
Download / Installation Procedures
1. Download the file. For the location where the file is saved, check the computer settings.
2. Double-click the downloaded EXE file to decompress it, then installation will start automatically.
Note:
A message may be displayed during the installation depending on the OS you are using, but continue the installation.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
It will scan at this stage by running Canon's own scanning software, supplied with the scanner download: scangearmp2. But this software is as rudimentary as toddler's tea set. It won't even let you change the resolution, filetype or scan area.
By the way, when I contacted Canon for help because their scanner wasn't working, they told me that they "don't support Linux". I replied by pointing out that they had taken the time to supply a driver, so surely they would want to make sure it actually worked when people installed it. But they simply repeated that they "don't support Linux".
I have owned a Canon LIDE 100 for many years. After installing the latest Ventura update on my iMac 2020 with an i9 processor, the 100 would lose connection after one scan. I'd have to unplug the scanner and restart to make another scan.
Yesterday I received a new LIDE scanner. I followed the installation directions repeatedly, disconnected the scanner, which is connected directly to my iMac with the provided cable and then with the cable from my LIDE 100. When attempting to use the IJ app, the computer cannot find the 300.
I stand corrected. Apple does provide limited AirPrint USB scanning support and both the Canon LIDE 300 and 400 are among the supported models. Apple's Image Capture should just detect them when configured for AirPrint connections.
That is all I have to go on from Apple's AirPrint listing. Otherwise, one trials VueScan Professional with either device and makes a purchase decision. Both scanner models are supported in VueScan Professional without any vendor drivers or AirPrint.
According to Canon, they no longer provide drivers or scanning software for the LIDE 300 for macOS Monterey or later. They claim it is supported by Apple's built-in AirPrint, but AirPrint supports networked devices, and the LIDE 300 is connected via USB. Try Apple's Image Capture to see if it detects the LIDE 300.
If you place a value on your time, and get fed up wasting it trying to make this scanner work on Ventura, then the optional, paid (free trial) VueScan Professional supports this scanner without any vendor drivers. That independence may be far more value than the cost of the VueScan product.
In 2010, I had a Canon flatbed scanner without macOS driver support, and I purchased VueScan Professional then to solve that issue. I still use that scanner with my M2 Mac mini Pro using VueScan and a USB-C adapter for it. I have never paid for a VueScan upgrade since original purchase, and I receive no benefit from the VueScan vendor for mentioning their product here.
I am running Ventura 13.4 and had problems with Brother printer going off line. I called Apple support and they could not fix the problem. Brother was a waste of time. Here is what I did. I added a new printer using the IP address of the printer. After selecting add printer. Select the globe which is the middle icon in add printer. Type the IP address into Address. Protocol will show as AirPrint. Then name the printer. This solution has been working when I look at my printers and scanners settings I see two printers the Brother printer that is offline and the new printer idle. I named the new printer "Brother IP address printer".
This entire thread is about supporting the Canon LiDE 300 scanner, and not about any Brother products, whose post is out of scope for the thread, and you should have submitted as its own main post in the Ventura community.
Do you want to download or update CanoScan drivers? Now, you come to the right place. This post of MiniTool will guide you through detailed steps to download CanoScan driver for a Windows 11/10/7 PC.
To make the Canon Scanner keep a good working condition and obtain the best experience possible, you can try downloading or updating the CanoScan drivers. In addition, if you encounter some issues like scanner not working and no scanners were detected, you can fix them by updating or reinstalling the scanner driver software.
The software Scanner Canon now can work with Windows 11 and Windows 10/8.1/7 (32 bit and 64-bit) operating systems. Bear in mind that if you upgraded OS with the Cannon Scanner driver remaining installed, you may not scan by pressing the SCAN button on the product. In this case, you need to re-download CanoScan driver.
The first way is to manually download CanoScan drivers from the Cannon support center. Before you start downloading the driver, make sure you have known your Canon Scanner model and your operating system (whether it is Windows 10, Windows 8.1, or Windows 7, and also running 32 bit or 64 bit). Once confirmed, you can follow the installation guide below:
Step 4. Now, you should see a list of optional drivers related to the CanoScan LiDE 300. Select the CanoScan utility download you want and click on Download. Then select a location to save the downloaded file.
Step 5. Once downloaded, double click the downloaded .exe file to decompress it, and then the installation setup will start automatically. Click on Next and follow the on-screen instructions to complete the installation.
Step 4. Select the Search automatically for drivers and Windows will detect the updated driver for you automatically. If any available updated drivers are detected, you can follow the on-screen prompts to finish the installation.
Once updated, you can restart your computer and check if the scanner issue gets fixed. If it still occurs, you can try reinstalling the device driver by selecting Uninstall device in Step 3.
We have updated the latest method of installing, connecting, and setting up your Canon Printer. Read this comprehensive guide on how you can quickly, and easily setup the Canon Printer on your Device in just a few steps.
Note: The steps outlined above provide a general guideline for copying using Canon printers. The specific buttons, options, and procedures may vary depending on your Canon printer model. For detailed instructions tailored to your specific printer model, please refer to the user manual or online documentation provided by Canon.
Note: The specific steps and options may vary depending on your Canon printer model and the version of Canon software you are using. For detailed instructions, refer to the user manual or online documentation provided by Canon for your specific printer model.
Many Canon Printers are Plug-n-Play, meaning that there is no need to install drivers or any software to run these printers or scanners, all you need to do is Power On your Printer, and connect it to your device, and you will get a prompt that automatically connects the printer and runs it on your device.
Encountering issues with your Canon printer driver can disrupt your printing tasks. Fortunately, there are common troubleshooting steps to resolve these problems and get your printer back to working smoothly.
Disclaimer: Please note that we are not Canon and are not affiliated with, endorsed by, or related to Canon Inc. or its subsidiaries. Our website provides independent services and support, which may include guidance for Canon products, but any use of Canon trademarks is solely for descriptive purposes. For official Canon support, please contact Canon directly through their official website or customer service channels.
The latest Canon CanoScan LiDE 300 driver package has all the files that you need to install to use the full functionality of this scanner. We are also sharing the installation process for this scanner driver which you must read to avoid any driver installation mistake.
The Canon CanoScan LiDE 300 is a standalone scanner best suited for scanning books and other bulky documents. The scanner supports USB connectivity and offers scan resolution of up to 2400 x 2400 dpi. The four buttons in front of the scanner allow one push operation for multiple functions.
c80f0f1006