Download Hear Our Cry By Don Moen
Beatzby Wall
1. Cancel out of the current setup mode
2. With the front cover removed from the Smart Sprinkler Controller, press and hold the reset button to hear the first beep and then two consecutive beeps a few seconds later -- The LED button will be flashing Blue/Amber indicating setup mode has been engaged.
3. From the Moen Smart Water Network application home screen, tap the plus '+' symbol and within the Quick Add popup, tap Add a Device
5. Select the Smart Sprinkler Controller and then Register your device tile
6. Successfully scan the QRC on the device to capture your account information
7. Enter Birth year and tap the arrow '-->' icon to finish registration of your Smart Sprinkler Controller
8. Tap Customize Device button edit the Device Nickname if you choose to
9. Tap the arrow '-->' button, verify your home location is correct before tapping the Continue button
10. Click the Skip step pill button and then tap the Set-up your network connection tile, the arrow '-->' button, Wi-Fi Settings button to display the Internet list
11. Locate and tap Moen-Sprinkler-xxxxx to hear the beep indicating a connection
13. Return to the app and select your Wi-Fi network and click the arrow '-->' button
14. A beep will sound indicating the connection to your network
15. Wait until another beep sounds and the LED on the Smart Sprinkler Controller is green, tap the Green Light button, and then tap Fine Tune Your Device to initiate and complete any Firmware updates and zone Detections
16. Tap the Continue button and then Finish Setup button
I dont know if you have a balancing spool. If you have a 1222 cartridge, when you have it out tap it on a hard surface. Maybe the spool is stuck. You should be able to hear the spool move when you shake the cartridge.
Sorry to hear about the replacement not working.Test flow with the center balancer removed.water heater valve off as you did before.This step removes the balancer from the test.You may find if your delivered hot water temp is above 135 degrees the limited cold only flow is not working with very hot supply temps.Do set the scald gaurd tab if only children use this bath valve.
Thanks. I'll give it a try. I am confused though as if the hot water is completely turned off; shouldn't the cold flow without any problem? It basically trickles out. and yet if I pull the clip and pull the cart out a bit the cold sprays out from behind. Since this is a new (November 2009) system and a single unit (can't take anything apart except pulling the cartridge) taking it apart seems like it would be impossible (and unnecessary - not enough time for buildup to occur). I have not heard back from MOEN as of yet as to how THEY might propose to fix this.
It feels as if life has come full-circle for me since my days traveling with Living Sound. Laura and I went on our first overseas trip to South Africa with Living Sound when we were college students. I proposed to her in South Africa and have always carried a special place in my heart for the entire continent of Africa. In recent years, the Lord has opened doors for me to perform concerts in Africa, as well as in Asia and the Americas. We regularly pack large venues as believers in those lands join together in praise and worship. I have great joy in these later days of my life because I am living my purpose, calling and dreams!
760c119bf3