Toyota P0200

0 views

Skip to first unread message

Armanda Kicks

unread,

Aug 3, 2024, 10:08:55 AM8/3/24

to perbprovinag

Sorted my starting problem, turned out to be dodgy starter, a new problem has now reared its head. The car will run fine for five ten mins, then It will then lose power and go into limp mode, turning the key off and on again will give full power again for a brief period. Engine managment is showing up a p0200 code, (powertrain - injector control circuit) Have checked all connections and all seems good, so signs of leaks either. Anyone had this problem before? or know what other areas I can check?

yeh i have the same problem, my car wouldnt start it is a 2005 55reg 2.2 d4d t spirit. Thought it was a dodgy Battery as have been jump starting it past few days. Now try to start it and nothing - so replaced the Battery and it still would not start. Attatched a diagnostics machine to it and getting the fault code p200 or p0200 injector circuit open.

For instance, only a single such missing confirmation is enough for the ECM to raise a P0200 error, store a Freeze-Frame, and set "Fail-Safe", or limp mode, to protect the engine from possible damage.

Thanks so much for that....bit beyond my knowledge level but useful none the less....I had to go with the garage repair in the end at 650 ouch but I'm confident i didn't get ripped off?? The car needed a new Driver Injector 89871-71010 a new Battery and the diagnostic you talk of from Toyota....

Hello i have problem with my Toyota Corolla 2004 2.0 d4d 85kw. Few days ago i added 300ml fuel cleaner to my full tank and after 1/2 tank the car started shutting down on highway at 130km/h. Then it started having problems with starting. No start or start and then die right after. I have codes p0200 and p1271. But sometimes when i unlock and lock it will start normally but sometimes it will idle normally but sometimes it will die right after.