Can you build this?

[Sotheby's Artist]

SECTION ONE-

Energy Source:

Here's something I wrote to the US Department of Energy concerning my
robot. Call me with any questions. Thank you, Siemens.

"Take a simple magnet. Then grab another. Put them with their positive
sides facing each other, then release one. The force makes one of the
magnets take off into the air. Very basic, but, key. Now, replace, on
a wind turbine, the wind with the airborne magnet's momentum and you
get your source. From there add inertia and this will work. Exactly
like the wind pushes the blades, this technology uses the magnet force
to turn the shaft. This works by controlling how the magnet releases
its energy once it comes into contact with other magnets so it
realeases the energy, controlled, only when placed directly in front
of a magnet when both magnets face positive on positive directions.

How does it provide a full revolution?

Take a dozen magnets (For Example). Now, place them on a disk that is
around five inches in radius, each in a position like the numbers on a
clock. I don't know if I wrote that right. Let's see here: Put a
magnet at the 1 o'clock position, 2, 3, 4, 5, 6, etc. All with the
positive sides facing clockwise (Rotating magnets or RMs). Now take
one to twelve more magnets and introduce them with a low wattage
powered (able to be powered by the generated power of the turbine with
enough power left over to power the grid) robot arm (introduced
magnets or IMs) at a position where it nearly comes into contact with
the RMs where they can face positive on positive sides. [View
attachments] In case you don't understand, simply email me and I'll
try to make it a bit more clear. (Constructive criticism is key when
it comes to properly building this robot. So shoot me some to trouble
shoot and I'll send you some vital info as well.) Now, as soon as the
IMs and RMs nearly face positive on negative by the next RM in line on
the disk, program the IM to pull the IM magnet away and reintroduce
them when the IM and RMs are facing positive on positive. I recommend
introducing the IM initially with only the RM12, 3, 6, and 9 position
and then RM1, 4, 7 and 10, after that, you can do the rest to help
with the pushing of the RMs until the desired speed is obtained. Once
the magnets are turning the shaft at high speed you can cancel out
with another robot arm all the magnets except for 12, 3, 6, and 9.
Another option is to use hundreds of magnets for rovolving magnets and
the same for RMs minus IM movement.


This should help. Let's go save the environment together. Think about
a few cities being powered by this technology. We can even make
nuclear powerplants go green and keep the polution levels completely
down. I'm interested in making it low cost for you so we can save the
most trees. It's the fine-artist in me, I think. I'm an actual
Sotheby's artist and exhibit in Soho, NYC once a year whenever I feel
like it so I ask you to please forgive me for any language that may
not have been stated correctly since I'm not super saavy with the
renewable energy industry's lingo."


This is the section I wrote to the Museum, The Art Institute of
Chicago about torque emmiting gears within this machine to produce
horsepower for a 5,000 HP engine.

Hybrids:
Also, when you start the maching up, remember the revolving door
trick. When you start it up it requires both hands to start turning
and once it is in motion a single finger can keep it going around and
around (Remember, like when you were a little kid). This trick is key
for the generator's high speed shaft to revolve properly. So two hands
are first gear and the rest of the gears can do the rest of the work.
Let's go with twenty gears to make it interesting. Oh, and did I
mention this can be turned into a high horsepower engine for vehicles
with sufficient torque with the twentieth gear to do some damage and
electricity output to power several hybrids per second." Basically.
Instead or 12 positions on a disk, have hundreds, as well as the IMs,
one per depending on how much the power generated will permit. Then as
the speed goes up, switch to only dozens, inertia permitting. Then
switch to one and as you use less and less RMs and IMs increase the
size of the magnet's strength. As you require more torque, say on a
hybrid construction machine, you can switch back to a gear with
superpowerful magnets with many more RMs and IMs. These are called
torque gears.

I'm willing to travel to your location for troubleshooting many times
per week. I give you permission to build this machine and I am the
creator of this machine. Oh, and I have dozens more like it. All of
which create high yielding energy efficiency, "high" as in 100%
reliable. Can you call me as soon as you read this to make sure you
got this email? Thank you if so.

SECTION TWO-

Sorry you are having troubles with the machine. I need to know what
part you are having trouble with. I heard you say it takes more power
to function and not enough power is available to power an external
source such the grid. Actually, I asked you to use extremely low
wattage parts for a reason. Let's focus on making one machine that
creates 100 MW per revolution. The only thing we need for this to work
perfectly is making sure the generator we use is as easy to turn as a
CD player's spindle/holder thingy. Basically, we need the "cd" to turn
with as much ease as possible. Okay, here goes. With the parts we are
using, AAA battery technology or much lower, or watch battery
technology where available, we can create MWs. We are at making 100
MWs per revolution and need .5 Ws per revolution to power the one IM
available to start the robot arm's function. Needed to work Kws at
most. Created power MW or TW with the right gear and natural magnets.
Oh, and did I mention we had to use natural magnets? It is important
due to a machine I found out about post inventing this machine that is
similar, however, it utilizes electric magnets. That is hard because
it taked more power to create the power thus leaving you at a loss of
energy. I know you Newton fans are excited. How about I fly in and we
build one in a day? Have the MW generator I requested and access to
parts especially powerful natural magnets. Call me when you get this
email about visiting and about ANYTHING, seriously, anything at all
you may need. Thank you.



SECTION THREE-

You will need this. Remember, the moving parts have to be superbly low
wattage to work. This is an animation I made. I am an entrepreneur but
have an internet company Nova Alternative and Nova Renewable. The
restaurant location for this link is because I designed their website
and was able to place this information there to show you the
animation. In case I'm hacked, which happens to me cause I think
someone is trying to steal this information, you have permission to
build a machine so long as you donate a few machines to under-served
communities throughout the world and make jobs available to many of
those people by allowing them to work in the factories that are used
to create these machines. That will allow them to be fed and have much
needed electricity. For colder climate communities that are under-
served, provide electric heating as well as the jobs. I'm a generous
man, I will repay you for helping out the community by donating a
machine to power your home or something, sorry for this part, but
budget permitting. Didn't say I was wealthy, and sorry about the new
money part, only generous. So, yeah, in case we're hacked and it looks
like I dissapeared from the face of the Earth feel free to use these
machines. Thank you.

View attachment One
http://www.laestacionrestaurant.com/renewableenergy/jptestlib.swf

Faster Version:
View attachment Two
http://www.laestacionrestaurant.com/renewableenergy/JP_GREEN-1.swf

The green and red rectangles are magnets. The red is the negative side
of the powerful natural magnet and the green is the positive side.


--
Sincerely,
Sotheby's Artist
perez....@gmail.com
(608) 362-8534