chooilin elizar alluring

1 view

Skip to first unread message

Albina Hickel

unread,

Aug 2, 2024, 8:14:13 AM8/2/24

to peartiosori

Is anyone else having an issue with Apple TV being unable to connect to the server. Everytime I try to go into Netflix I get a message saying "Unable to sign in. Apple TV can't connect to the server at this time. Please try later." I have tried unplugging the ATV multiple times with no luck. I have been able to get into my netflix on my iMac so that doesn't seem to be the issue.

The only other thing I can suggest is to reset the settings: Choose General > Reset Settings from the main menu on Apple TV. That means you'll have to re-enter all your accounts and passwords (including your wireless network password). Pain in the neck, I know. And it still might not solve the problem. ?

I just had a similar issue, only the Settings, Computer, and Internet menus and nothing under the internet menu. Would not connect to my library under Computer. Unplugged the Apple TV, waited 20 seconds, plugged in. Full menu and Netflix came up.

Hi There - I just set up a AC1900 Wireless MU-MIMO Gigabit Router Archer A9 (which for some reason isnt an option from the model list up there) and it is lovely - my phone, tablet, computer, google home devices are all working great. However, netflix on my TCL smart TV won't work. The TV itself is connected and other channels (such as amazon prime) work. Netflix keeps giving me error codes tvq-st-103 and tvq-st-131, saying it can't connect to the network. I can watch netflix on my other devices. I've tried the obvious things like restarting the network by unplugging everything and then plugging back in one at a time, resetting the netflix login, returning the TV to factory settings... It's gotta be something with the router but I can't figure out what. Anyone here have any smart ideas?

You can try to factory default the router by holding the reset for 15 seconds. When the router is back up connect to the default Wi-Fi and test the connection. By default the router can not block specific traffic, but there might have been something adjusted which defaulting will clear out.

If the issue still happens it would be best to contact Netflix to see if there are any settings to adjust or to try since streaming services work with the router from other companies as other devices.

There could be regional differences affecting your connection. We recommend creating a thread on our global community. community.tp-link.com/en. This community, community.tp-link.com/us is only able to assist customers in the U.S. While issues may seem to be the same issue and in somecases they are its always best to interact with the team best able to handle your particular concerns.

Because i am also a consumer i do get annoyed when companies say this but in this case the first thing to do is reach out to the manufacture of the TV and troubleshoot their device first. This is because since its the only device having issues the troubleshooting would want to begin at the client and not the router. If more devices were having the same issue then it would be one thing but with just one experiancing this issue that is where you would want to start.

I recently set up an OpenWRT router with client pptp, the router and VPN access work fine, but I can't get Netflix to work on smart tv.
I am using Private Internet Access.
The TV is connected via ETHERNET cable.
Youtube works perfectly, only netfix doesn't work.

assuming this diagnosis is correct ( likely )... the simple answer is "you don't"... the most common/pragmatic solution for this situation is to use Policy Routing to send netflix traffic only over the regular WAN and not the VPN.

You may also let netflix know... as a paying user, that this policy is not to your liking. Good luck with that... but assuming 15% of their user base did this tomorrow and then cancelled subscriptions.... you'd wonder what might result.

Anyone else with the XiOne, having issues with netflix?
ALL other streaming apps work fine on the box, netflix will not load.
Brings up the logo, spins for a bit, then says cant connect.

Doing some of the netflix app tests, says its not connected to the internet.
Obviously the box is and works with everything else.

Have rebooted, etc all already.

Netflix seems to work fine on my XiOne and Xi6-T set-top boxes. However, it looks like the stored app data got reset on the XiOne -- when I launched the app, I got the initial sign-in screen and had to log into the app again.

ITs been working fine on my other boxes.
I have since tried doing the reset of netflix from pressing A, as well as when I get into that netflix diag menu a reset there (probably doing the same thing).

Same issue.

My next thought, would be a full factory rest on the whole box?

It might, but it depends on what the problem is. If it's just due to some data that is not being cleared, a simple factory reset should fix that. If you have a problem with the on-board Flash storage, a factory reset may not be enough.

You can try looking at the diagnostics screens. " Down Down 2" typically only shows informational stuff but it's still worth checking. " Down Down 4" may show helpful errors on the "Install Summary" or the "Advanced Diags" screen.

There is a much more aggressive reset available that completely clears Flash storage on the box, but that is a VERY risky thing for an end-user to do. You should only attempt that under the direction of Tech Support because if something goes wrong, you could end up rendering the box unbootable.

On one of my Xi6-T STBs, the Prime Video and Disney+ apps would not load. An error flashed for an instant, then I was back to the Apps screen. After a few more tries, both apps finally loaded, although I found that I needed to sign back into Disney+.

I'm not sure what to make of this. A few years ago, the App problems that I just saw on my Xi6-T had started creeping into ALL of my Xi6-A set-top boxes; I got them all replaced and the problems went away. However, while my Xi6-T's might be showing signs of old age, my XiOne is only a few months old. Another (known) problem is that the Amazon Music app is temporarily unavailable. It's gone from the Apps menu. When I try to invoke it with Voice Commands, I get an APPS-04154 error. It's still too early to tell whether my Xi6-T's are actually going sour. However, my STB's also got updated again last night, and it sure looks like Rogers may be trying to sort out some issues with their Ignite STB software builds.

Hi everyone, Currently Netflix is only allowing me to view netflix original content when connected via the vpn. If you search for a non netflix original show, you will find it but only the "remind me" button is available. I am in Australia trying to access the US and UK netflix content. Is there a work around for this? Thanks in advance for any advice.

Hi thanks for the quick response. The dark knight was just an indicative example but it is the same for all other content although, I had some limited success on the USA South server. It's interesting to see the list of servers in your reply as these options seem unavailable on my list. I have attached a screen shot of the available servers I have. Do I have the incorrect version of the vpn? or is there a setting I need to adjust so I can see the additional servers? I would really like to know how I can access the multiple US and UK servers that you mention. thanks for your help.

Update - Hi, I was obviously running an outdated or different version of the vpn, as I downloaded it again and the sever list updated. The netflix content is now available on the USA servers however, unfortunately neither of the UK servers are connecting to netflix or bbc iplayer at all.

Thanks for explaining the BBC issue. Regarding netflix UK, I can't provide any specific examples at the moment as i can't even connect to the site as the per the attached screenshot. I get the same result with both UK servers. cheers.

Make the most of streaming services - region-restricted content list = list of streaming services that Kaspersky VPN supports. Kaspersky recommends a server location for each streaming service to help you get the most out of your service.

Inject hystrix core in one existing bundle which act as connector towards an external system and wrap one of its service with an HystrixCommand . Everything is working as expected, I can see hystrix logic working. Also with the help of DEBUG logs I checked that all is registered properly (com.netflix.hystrix=DEBUG).

Create a new bundle which is responsible of registering the hystrix.stream servlet. Basically I retrieved the HttpService (org.osgi.service.http.HttpService) coming from the OSGi runtime, and registered the servlet on it. All seems fine, servlet is registered properly and visible at $myEndpoint/hystrix.stream. This way:

Problem is that I cannot see data objects pushed in the stream. Only ping updates are visible, even if at the same time i'm stressing HistryxCommand warpped service with a Jmeter/Postman test.Given that I'm not noticing errors, I'm thinking of different streams getting used by the publisher and the reader logic. Can someone help me in understanding a bit more of the internals of Hystrix and troubleshoot my scenario ? I tried looking at the Hystrix sources but to be honest this did not help for the time being.

HystrixCommandMetrics singleton is used by AsbtractCommand classes to push events metrics. HystrixCommandMetrics singleton is also referenced by HystrixMetricsStreamServlet (through HystrixDashboardStream class) to read the same events metrics. So if HystrixMetricsStreamServlet and AbstractCommand(s) don't share the same classloaders they're reading and pushing from/on different objects.

Since I plan to use Hystrix to wrap different systems, hence in different OSGi bundles, a clean solution I found as of now is to pack all required Hystrix libraries in a single com.mycompany.osgi.hystrix and make it available on the OSGi runtime as standalone plugin.