Xerox 3025 Driver Windows 10
Enon Zoberman
The below driver works on Ubuntu mate 18.04.1 only for printing.
The scanner application does not see the scanner.
On Ubuntu 14.04.5 (32 bit) the same driver worked just fine.
I tested the driver on Ubuntu mate 18.04.1 on 32 and 64 bit with firewall on AND off, but NO luck.
I installed the driver by unpaking it and right clicking on install.sh and run as administrator.
When the question about the firewall got printed in terminal, I tried with autoconfigure and with skip. I couldn't make the scanner work.
Hello Marius, i would like your assistance in setting up my Xerox Workcenter 3025, I have the same issue, i can not install the driver package for the scanner (the printer is working just fine), could you explain to me in steps what should I do.
hello, I am new in Linux, i tried to run in terminal those lines but after reboot my operating system forced me to install a fresh copy of the Linux.
Could i get in touch with you on e-mail? could i call you on phone? I am from Romania.
Thanks!
I hope this list has given you an idea of what to look for and where to start when your printer does not print. Every situation is different so these are general things to look at or try. For more specific information search the support page for your device, contact your local support centre or post your situation on the Community Support Forum.
Hi Altafa,
Thank you for reading the At Your Service blog. Please uninstall the current driver, reboot your computer then install the latest driver for your printer. If this does not help please consider contacting your local support centre.
Thanks,
CherylO-Xerox
I have xerox 5855 machine. Currently i am facing print problem through network it shows ping to laptop showing proper required IP addresses but the print command is not persuaded. When I press the info pages print its also does not work. Please guide me how to resolve this issue
Hi Arif,
Thank you for reading the At Your Service blog. Please take a look at the solutions for will not print. If none of these solutions help please consider contacting your local support centre for additional assistance.
Thanks,
CherylO-Xerox
I downloaded a picture of something form my e-mail to my desktop. When I press print it will not allow my Xerox printer to print. Can you please help. This problem has been going on for the past 2 hours
Hi,
Thank you for reading the At Your Service blog. You have not mentioned which printer you are using. Please search the knowledge base for your printer for unable to print. If you can not find an answer there please contact your local support centre for further assistance.
Thanks,
CherylO-Xerox
Hi Sergio,
Thank you for reading the the blog. Please take a look at this information on the Xerox Customer Support Forum to see if this will help you. If this does not help please consider contacting your local support centre.
Thanks,
CherylO-Xerox
I have a Xerox Phaser 3215. It is connected via Wi-Fi and was working fine. All of a sudden I could no longer scan or print (wirelessly). I have uninstalled and reinstalled the drivers. The printer is discoverable (my computer sees it), but the printer will not connect.
Hi Steve,
Thanks for reading the blog. Please make sure you have followed the instructions for either configuring wi-fi direct using CentreWare Internet Services, or how to setup wi-fi using the easy wireless settings program. If these articles do not help you to resolve the issue please consider contacting your local support centre for additional assistance.
Thanks,
CherylO-Xerox
Hi Ikka,
Thank you for reading the blog. I found this article on the fault code 016-757 you are seeing. If the problems continue please consider contacting your local support centre.
Thanks,
CherylO-Xerox
Hi John,
Thank you for reading the blog. Please first try to ping the printer and see if there is a network connection. If it passes the ping test please remove the current driver and reboot your laptop and reinstall using the information in this installing driver information from an article in the online support for your product.
Thanks,
CherylO-Xerox
Thank you for reading the blog. If you have not already found a solution for your issue or answer for your question, please consider posting on the Xerox Customer Support Forum. Alternately contact your local support centre.
Thanks,
CherylO-Xerox
head i have Xerox SC2020 by the network why am made share on all laptop is working just one laptop not working so when am make a print in xerox print will be error job ? so more times i will remove and again add also have the same problem ??
Hi Hakem.
Thank you for reading the blog. If you have not already found a solution for your issue or answer for your question, please consider posting on the Xerox Customer Support Forum. Alternately contact your local support centre.
Thanks,
CherylO-Xerox
Hi Andy,
Thank you for reading the blog. If you have not already found a solution for your issue or answer for your question, please consider posting on the Xerox Customer Support Forum. Alternately contact your local support centre.
Thanks,
CherylO-Xerox
Hi Lal bihari,
Thank you for reading the blog. If you have not already found a solution for your issue or answer for your question, please consider posting on the Xerox Customer Support Forum. Alternately contact your local support centre.
Thanks,
CherylO-Xerox
Hi Steve,
Thank you for reading the blog. If you have not already found a solution for your issue or answer for your question, please consider posting on the Xerox Customer Support Forum. Alternately contact your local support centre.
Thanks,
CherylO-Xerox
About At Your ServiceXerox products big and small have many features, options and services. Let Xerox Customer Support help you understand and use the features, options and services available for your production, office or small business products and laugh a little along the way.
Xerox WorkCentre 3025 package contains the Print drivers, Easy Printer Manager, Easy Wireless Setup utility, Scan Driver, and PC-Fax driver for 3025 printer model. Easy Printer Manager acts as an interface for Smart Panel, Network Scan, ScantoPC, and Printer Settings Utilities.
My PC is based on Intel Core i5-4460 CPU with Intel HD 4600 Graphics. I'm trying to connect via HDMI my Samsung UE32SS5500 TV as a second monitor. However, rthe TV screen is blinking. I've been trying to choose appropriate resolution and frequency via Intel HD Graphics Control Panel, but the screen continues blinking. I inquired for supported modes in TV Manual, but it doesn't help.
In fact, the problem is partially solved. I noticed that the system created at least two logical devices for the connected TV: video (monitor) and audio. When I deleted audio device (and restart), everything is correct. However, I do not send audio to TV (iPc speakerphones are now chosen),- otherwise the audio device will be created, and TV screen will blink again.
Amy, thanks for trying help. The problem has been gone around, but not completely solved, because I cannot afford to send audio to TV. In fact, it is known problem that audio signal 'mixes' with video, and monitor blinks. If there were option 'partially solved', it would be my choice; I I've marked the question as solved.
spectorsky I am aware that Intel is currently working with flickering and blinking issues on Windows 10, if the beta driver does not work this might be the case and at this stage I would recommend to wait for future driver releases.
I have tried to replicated the issue you reported with the HDMI audio but everything worked fine, we have audio from T.V. When I was running the test I disable the sleep option on Windows 10, selected the T.V as default device in Playback devices and installed the latest driver version.
Amy, now I have much more serious problem than blinking screen while audio is sent via HDMI. Now TV screen doesn't receive signal via HDMI at all. I'm intuitively feeling that the problem is in the setting within PC or TV, not cable. PC shows TV in device manager, both video and audio devices. However, TV says 'no signal', the same behaviour when PC is turned on or turned off. Previously HDMI worked, but suddenly stopped. The only essential thing what I can mention done before signal disappeared is installing software for Xerox WorkCentre 3025.
fc059e003f