Codesys 3.5 Programming Manual Pdf
Shawnna Franz
Hello Martin, I think the problem has been shown in the pictures, I have followed the instruction of the simumatik user manual to set the PLC program in very detail in codesys, the simumatik PLC status is standby but not running, and the reminder info. shows that some problems regarding with setup, I viewed some videos on youtube which in Spanish, it seems that every step are the same, but they can build the connection directly, I was confused by this problem for a few days, it must have some problem but I cannot find it. by the way, how can I change my user name from the mysterious numbers to the normal name in this community? thank you
Hello!
Can you please download the program UAExpert from the address -automation.com/. You need to register to install it. This program lets us see connections to codesys so we can rule out some possible causes.
Hello Martin, I am not sure I have done everything 100% correct according to your instruction, the attached pictures are the screenshots during the process, it shows that some problem with connection, please help to check it. thank you for your support.UAexpert 119201080 341 KB UAexpert219201080 316 KB UAexpert319201080 305 KB
Edit: I believe I found the problem cause.
It is as I mentioned, there is something wrong with the latest version of Codesys (CODESYS V3.5 SP17). I tried doing the same connections with an earlier version of Codesys (CODESYS V3.5 SP15 Patch 2) and everything seems to be working fine.