connector for SMA antenna
50 views
Skip to first unread message
Paolo Di Prodi
May 29, 2012, 5:33:10 AM5/29/12
to pans...@googlegroups.com
Hello Daniel
could you also put in the shop an SMA connector that matches the 3 pin connector for the antenna?
I know it is a hassle but I prefer to have a solid antenna rather than a wire.
Something like this:
http://proto-pic.co.uk/868-900mhz-right-angle-sma-antenna/
Cheers.
--
Dr. Paolo Di Prodi
Robomotic ltd
www.robomotic.com
Address:
CIDS Incubator, Room 203
University Avenue
Thomson Building
Glasgow, G12 8QQ
UK
This email and any attachments are confidential and should not be read, copied or disclosed to anyone other than the intended recipient without the permission of the sender. Robomotic Limited does not accept liability for any loss or damage which may result from this email or any attachment, or for errors or omissions arising after it was sent. The views expressed in this email are those of the author and do not necessarily reflect the views of Robomotic Limited. If you have received this message in error, please notify the sender immediately and delete the material from any computer.
Robomotic Ltd is a limited company registered in Scotland no. SC389778
could you also put in the shop an SMA connector that matches the 3 pin connector for the antenna?
I know it is a hassle but I prefer to have a solid antenna rather than a wire.
Something like this:
http://proto-pic.co.uk/868-900mhz-right-angle-sma-antenna/
Cheers.
--
Dr. Paolo Di Prodi
Robomotic ltd
www.robomotic.com
Address:
CIDS Incubator, Room 203
University Avenue
Thomson Building
Glasgow, G12 8QQ
UK
This email and any attachments are confidential and should not be read, copied or disclosed to anyone other than the intended recipient without the permission of the sender. Robomotic Limited does not accept liability for any loss or damage which may result from this email or any attachment, or for errors or omissions arising after it was sent. The views expressed in this email are those of the author and do not necessarily reflect the views of Robomotic Limited. If you have received this message in error, please notify the sender immediately and delete the material from any computer.
Robomotic Ltd is a limited company registered in Scotland no. SC389778
Daniel Berenguer
May 29, 2012, 5:37:25 AM5/29/12
to pans...@googlegroups.com
This was already in the agenda ;-)
Paolo Di Prodi
May 29, 2012, 6:43:44 AM5/29/12
to pans...@googlegroups.com
Hello good and thanks a lot for the bug fixing section yesterday!
On Tue, May 29, 2012 at 10:37 AM, Daniel Berenguer <dbere...@usapiens.com> wrote:
This was already in the agenda ;-)
Reply all
Reply to author
Forward
0 new messages