Re: FW: [pandaboard] USB Storage on PandaBoard, Linux Kernel 3.4rc6

[Munegowda, Keshava]

hi shankar
In defconfig , you need to enable the following:
- scsi disk support in drviers->scsi->disk support
- ehci driver - usb support>host side support->ehci hcd


regards
keshava

On Mon, May 28, 2012 at 4:22 PM, Joshi, Vikas <v-jo...@ti.com> wrote:
>
>
> -----Original Message-----
> From: panda...@googlegroups.com [mailto:panda...@googlegroups.com] On Behalf Of Shankarnarayan
> Sent: Saturday, May 26, 2012 4:27 PM
> To: pandaboard
> Subject: [pandaboard] USB Storage on PandaBoard, Linux Kernel 3.4rc6
>
> Hello,
> I am doing a project on the FAT file system, and working on the Linux
> Kernel 3.4rc6 source code, which I obtained from the mainline git
> tree.
> I need to use a USB drive to test some parts of my project.
>
> When I boot, the kernel says USBStorage is enabled, but I do not see
> any sdX devices in /dev/ after it boots even when a pen drive is
> connected. I tried 3-4 devices, and none of them seem to be detected.
> Can someone help me with getting this working?
>
> Thank you,
> Sankaranarayanan M