PADS 2007.2 is available on SupportNet

79 views
Skip to first unread message

Dave White

unread,
Apr 9, 2008, 1:59:01 PM4/9/08
to Talk Mailing List
Hi Guys,

Here's the latest press release from Jim Martens...

Regards,
-Dave

---------------------------

PADS2007.2 is now available for download from SupportNet (link below).

http://supportnet.mentor.com/downloads/010408.cfm?product=C115-S153-G192
-P10548&redirected=true&reason=2

This release extends our platform support strengthens support for our
Japanese customers, in addition to correcting many defects.

The Microsoft Windows Vista operating system is now supported for PADS
Logic, PADS Layout, and PADS Router. (Note: DxDesigner and HyperLynx
will support Vista in a future release). As of this release, we are
dropping support for the Windows 2000 operating system.

The PADS2007.2 installation supports both English and Japanese versions
of Microsoft Windows. PADS Logic, Layout and Router will display menus
and dialogs using Japanese Kanji characters when installed under Windows
XP Japanese or Windows Vista Japanese.

For information on PADS2007.2, please see the Release Highlights and
Release Notes which are available on SupportNet and with the
distribution media.

Regards,

Jim

Jim Martens
mailto:jim_m...@mentor.com
Mentor Graphics
Product Marketing Manager
300 Nickerson Rd, Marlboro, MA 01752

-END-
SupportNet: http://www.mentor.com/supportnet
To unsubscribe send a blank email to: leave-ta...@listserver.pads.com
For assistance please send mail to talkli...@mentor.com

ta...@listserver.pads.com

unread,
Apr 9, 2008, 3:15:33 PM4/9/08
to Talk Mailing List

The PADS2007_2_rh.pdf file makes no mention of the defect fixes, only that the ui will automatically refresh now. (Big Whoop)

Is there a 'Release Notes' document that lists the many defect fixes?


Denis Lefebvre, CID+
Sr. PCB Designer
Finisar Corporation
(408)542-3832

Greg Bordash

unread,
Apr 9, 2008, 3:53:04 PM4/9/08
to Talk Mailing List
Denis,
 
Release Highlights mention a release notes doc on pg 4 but the link is broken.
 

Regards, Greg.

Greg Bordash
Evertz Microsystems
PCB Design Group

For assistance please send mail to talkli...@mentor.com -END-

ta...@listserver.pads.com

unread,
Apr 9, 2008, 4:01:29 PM4/9/08
to Talk Mailing List
Exactly - that's what I was looking for and could not find.
 
Denis Lefebvre, CID+
Sr. PCB Designer
 

From: Greg Bordash [mailto:ta...@listserver.pads.com]
Sent: Wednesday, April 09, 2008 12:53 PM
For assistance please send mail to talkli...@mentor.com -END-

Colin Tunnoch

unread,
Apr 9, 2008, 4:23:48 PM4/9/08
to Talk Mailing List
The Release Notes are coming soon to SupportNet. In the meantime, please see the attached...

From: prvs=197917fee1=denis.l...@finisar.com [mailto:ta...@listserver.pads.com]
Sent: Wednesday, April 09, 2008 4:01 PM
For assistance please send mail to talkli...@mentor.com -END-
PADS2007_2_rn.pdf

ta...@listserver.pads.com

unread,
Apr 9, 2008, 4:42:58 PM4/9/08
to Talk Mailing List
Thank you so much.
 
Denis Lefebvre, CID+
Sr. PCB Designer
 

From: Colin Tunnoch [mailto:ta...@listserver.pads.com]
Sent: Wednesday, April 09, 2008 1:24 PM
For assistance please send mail to talkli...@mentor.com -END-

John Matthews

unread,
Apr 9, 2008, 5:09:02 PM4/9/08
to Talk Mailing List
I sent an email to the listed "contact the webmaster" (or whatever it's called) email address on the Mentor website about the missing file and got this...

[snip]
 
This is the mail delivery agent at messagelabs.com.
I was not able to deliver your message to the following addresses.

<suppo...@mentor.com>:
192.94.38.131 does not like recipient.
Remote host said: 550 bounce_localunknown router forced verify failure
[snip]

Followed by a bunch of routing and code gibberish, plus an odd looking copy of my original email.

And I checked, no SPAM attached to it. Must be a different computer than the Listserver host.

Classy and very customer friendly. [That was sarcasm]

JM

prvs=197917fee1=denis.l...@finisar.com wrote:
Thank you so much.
 
Denis Lefebvre, CID+
Sr. PCB Designer
 

From: Colin Tunnoch [mailto:ta...@listserver.pads.com]
Sent: Wednesday, April 09, 2008 1:24 PM
To: Talk Mailing List
Subject: RE: PADS 2007.2 is available on SupportNet

The Release Notes are coming soon to SupportNet. In the meantime, please see the attached...

From: prvs=197917fee1=denis.l...@finisar.com [mailto:ta...@listserver.pads.com]
Sent: Wednesday, April 09, 2008 4:01 PM
To: Talk Mailing List
Subject: RE: PADS 2007.2 is available on SupportNet

Exactly - that's what I was looking for and could not find.
 
Denis Lefebvre, CID+
Sr. PCB Designer
 


-- 
John Matthews
Silicon Hills Design
8504 Cross Park Drive
Austin, Texas 78754

512.836.1088 x1108

Roger Littlewood

unread,
Apr 10, 2008, 4:27:19 AM4/10/08
to Talk Mailing List
Doesn't the 192. bit indicate it never got out of your local area network?
Maybe your router(s) know all about you :-)

R

"$subst ('member.fullname')" <ta...@listserver.pads.com> wrote in message
news:96010@talk...

Roger Littlewood

unread,
Apr 10, 2008, 4:58:12 AM4/10/08
to Talk Mailing List
Whoops - wrong, 192.94.38.131 is Mentor. R

"$subst ('member.fullname')" <ta...@listserver.pads.com> wrote in message

news:96018@talk...

Reply all
Reply to author
Forward
0 new messages