Re: Argus Monitor V2.0.13
Takeshi Krueger
I'm trying to export spark (2.4.0) custom metrics in prometheus format.I found this guide -sec.com/monitoring-spark-prometheus/Running on my local pc (windows) I am able to see my metrics in visualVM and in spark's json :4040/metrics/json/
Abstract:UBathy is an open source software developed for bathymetry estimation from video images. The proposed scheme is based on extracting the wave modes from videos of the nearshore surface wave propagation. These videos can be formed either from raw camera images, which must have been previously calibrated, or from georeferenced planviews. For each wave mode extracted from the videos, the wave frequency and the spatially dependent wavenumbers are obtained. The frequencies and wavenumbers from different videos are used to estimate the bathymetry by adjusting the dispersion relationship for linear surface water waves. The bathymetry at different times can further be weighted and aggregated using the Kalman filter. The new software is suitable for Argus-type video monitoring stations and for moving cameras mounted on drones or satellites, and it is meant for users familiar with coastal image processing and suitable for non-experienced users. The software and an application example are available on the GitHub platform.Keywords: bathymetry; video monitoring; remote sensing; beach; nearshore; coastal zone; signal decomposition
Once baseline imaging was completed, iNO was continuously administered to the patient. After 5 minutes with the patient breathing inhaled nitric oxide to ensure steady state conditions, imaging was repeated. All volumetric measurements were indexed to body surface area using the DuBois method [14]. Two independent readers interpreted each study and the mean value of each measurement was used for analysis. The acquisition technique prevented blinding readers to the study sequence. A follow-up phone call was placed with each subject 1 day following the study to monitor for any adverse events.
aa06259810