Newbie question MMDVM P25

[papaloteranch]

I am sorry as I am sure this has been covered but I cannot find it.

 Trying to set up a MMDVM (ZUM1.0.1) I have the pi set to the parrot, I can set the RX level where I get a green receive light but cannot get the repeater to TX, can manually TX in the MMDVMcal mode.

 I have not been able to completely com on DMR although I am told I am 100% on the servers so it looks like possibly a user radio issue there (cheap TYT), anyway it looks like I have the RX/TX invert etc. set up correctly.

I am using a XTS3000 which I just put on the bench for a complete alignment and digital quality test, so that should not be an issue. 

 The first question I have is on the P25NX site under users it says to use the ID issued by DMR-MARC which I do have a repeater and user ID but where do I program the user ID into the XTS3K???

 Again sorry for all the stupid questions but this is getting a little frustrating..

Craig  

[Lily W.]

P25 RIDs (radio IDs) are entered in the ASTRO Conventional system in XTS3000 CPS.

--
You received this message because you are subscribed to the Google Groups "P25NX" group.
To unsubscribe from this group and stop receiving emails from it, send an email to p25nx+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/p25nx/39e490a2-8a9f-4951-ab10-852919609937%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[papaloteranch]

Thanks, obviously I am missing allot of information, anywhere I can find a tutorial?, I am sure I do not have the repeater set up correctly ether.

Craig

[David Krauss]

P25NX has nothing to do with MMDVM (at this time) or DMR (ever). 

Sent from an iPhone 6

--
You received this message because you are subscribed to the Google Groups "P25NX" group.
To unsubscribe from this group and stop receiving emails from it, send an email to p25nx+un...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/p25nx/65e29867-999a-4b3b-8cca-446c7843991c%40googlegroups.com.

[papaloteranch]

Oh, I am sorry, are you saying the MMDVM P25 reflectors are not the same ones as P25NX? Feeling pretty stupid right now..

 But the advice given on the user ID did get me a little farther down the road, will give you guys a holler when I get my 900MHz Quantar installed in Corpus, waiting on antenna work now. 

On Sunday, December 10, 2017 at 1:50:43 PM UTC-6, papaloteranch wrote:

[David Krauss]

Correct. MMDVM is a completely different system. 

Sent from an iPhone 6

--
You received this message because you are subscribed to the Google Groups "P25NX" group.
To unsubscribe from this group and stop receiving emails from it, send an email to p25nx+un...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/p25nx/8da245b7-2530-4503-b50b-9de47ac56439%40googlegroups.com.