IP & Stun Group Needed

Chris Whitam

unread,

Feb 5, 2018, 12:33:33 PM2/5/18

to P25NX

Can someone assign me an IP & Stun group for a new repeater to be added to the system? Located in Ocean County, NJ, sent an email to the address listed on the site but have not gotten a response back so I just want to make sure it made it through.

73

AC2DW

Bryan Fields

unread,

Feb 5, 2018, 4:04:50 PM2/5/18

to P25NX

AC2DW
STUN 155 (doesn't matter, only locally significant)

Tunnel IP 172.21.4.155
Subnet 172.31.4.240/30
FA0/0 172.31.4.241
Pi 172.31.4.242

You good on the cisco config?

73's
--
Bryan Fields

727-409-1194 - Voice
http://bryanfields.net

Chris Whitam

unread,

Feb 6, 2018, 2:53:37 PM2/6/18

to P25NX

Thanks.

I also had this set emailed to me by Earnest, which I started working on the config with. Is it ok to stick with them?

STUN ID: 156
Tunnel IP: 172.21.4.156
Network IP: 172.31.4.228
Fa0/1: 172.31.4.229
Pi address: 172.31.4.230

I do have a few questions on the config template.

Ethernet 0/1 is pi address .230 since thats whats plugged in there?

Under serial0/0/0
Stun route all tcp should be the pi address .230?

Im new at Cisco so forgive me.

Reply all

Reply to author

Forward