No VPN

[Bill Atkinson]

I've built my router based upon the config template provided in the pinned post at the top of these forums. I've done all of the 3rd/4th octet substitutions for my region/STUN group. As you can see from the following, something isn't quite right:

p25nx-r1#sh cry isa sa
IPv4 Crypto ISAKMP SA
dst src state conn-id status
44.98.249.177 44.48.8.18 MM_NO_STATE 0 ACTIVE
44.98.249.177 44.48.8.18 MM_NO_STATE 0 ACTIVE (deleted)

Here is my 'ip int bri':

p25nx-r1#sh ip int bri
Interface IP-Address OK? Method Status Protocol
FastEthernet0/0 44.48.8.18 YES NVRAM up up
FastEthernet0/1 172.31.4.245 YES manual up up
Serial0/0/0 unassigned YES NVRAM up up
Loopback0 10.2.4.156 YES NVRAM up up
Tunnel1 172.21.4.156 YES NVRAM up up

I've moved the router both inside and outside of the ASA that services my amprnet space, but no joy.

[David Krauss]

US Hub is down due to a fiber cut.

Sent from an iPhone 6

> --
> You received this message because you are subscribed to the Google Groups "P25NX" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to p25nx+un...@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/p25nx/93dc75d7-91d3-4a56-8c15-2b7c9f1ab1fd%40googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.