Age-depth model output

[Marie-Louise Siggaard-Andersen]

How do I get the Age-model in a table with depths in 1mm resolution?

[Christopher Ramsey]

To extract information from the Age-Depth model you need to go to the data tables for the P_Sequence. To do this click on the document icon next to the P_Sequence label in the output table.

From there you will see a number of different tables. The "Depth Model" table has the output at the dated and interpolated points. To extrapolate to 1mm resolution, Fill in the three boxes below this:

- From
- To
- Incr

If your depth is in cm enter 0.1 for the Incr or, if in m, 0.001. Then press the [ << Depths ] button. This will fill the box to the left with the data you need dependent on the timescale set (adjusted first using [Edit > Time] and [Edit > Format].

You can also us a list of specific depths (eg for proxy data) with the column name "z" for the depths required.

Best wishes

Christopher

> On 19 May 2025, at 12:17, 'Marie-Louise Siggaard-Andersen' via OxCal <ox...@googlegroups.com> wrote:
>
> How do I get the Age-model in a table with depths in 1mm resolution?
>

> --
> You received this message because you are subscribed to the Google Groups "OxCal" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to oxcal+un...@googlegroups.com.
> To view this discussion visit https://groups.google.com/d/msgid/oxcal/bac9d78e-2a1b-428a-b7fb-db9c2bf96085n%40googlegroups.com.

[Marie-Louise Siggaard-Andersen]

Dear Christopher

Thank you. That helped me so much.

All the best

Marie-Louise