Bim 360 Glue Android

[Tamar Navratil]

Iknow I'm late to the replies but I've looked extensively and BIM3 360 Glue for mobile is only available for Apple OS. There is an app called A360. It does allow you to open over 100 types of 3d files, including NWC files. You can red line, navigate, etc. just like the BIM 360 Glue app. The only downside is you have to download the files to your tablet or from a cloud drive. It's a work around for me anyway, because I'll be damned if Autodesk forces my hand into buying anything apple related. They should support android users because there's a ton more of us out there. Hope this helps.

I tried to adhere a glass screen protector to my Samsung S9+ and made a mess of the loca glue. The glue got into the top speaker grill and I tried to clean it out with denatured alcohol / methylated spirits.

@Ahmed Nasym same happen with me that was not due to glue in speaker actually glue goes from sides of the panel and damage the screen circuts. I have replaced it with a new screen :( the glue have really thin particals that goes into the circut. Next time make sure to use tape on all sides of the screen to apply UV protector.

I had to install curved tempered glass in my Vivo X70 Pro mobile and the glue in it went to the side volume buttons of my mobile and now my mobile volume buttons are not working they got stuck tell me how to remove glue ???

You are a life saver! I got glue in a week old galaxy s20 and about had a heart attack when I made a call and the sound was muffled and crackly. I used acetone and a paintpbrush and was able to get it all clean. Thanks so much for your help!

I created an account just to let anyone reading know that I encountered the same problem- and this solution fixed it! Thank you so much sir or ma'am- this worked like a charm! I shall send good vibes and prayers your way.

Also, in case you don't have a paintbrush; a clean, densely bristled make up brush works just as well- i used precision tweezers (for eyebrows haha) to remove the excess on top, then used this proceeded to do this. Amazing. Easy. Cheap- it didn't even take a lot of time- i was done in minutes.

I had the same problem with my S9 plus. Wanted to fix screen protector and some of the glue got inside my speaker. Sounds started to crack. Yesterday, I used perfume and tooth brush to clean it. Luckily it worked. Now it works fine.

I had the same problem. What I did was, added some baby cologne on the grille of the earpiece, let it soak for like 10 seconds, then gently brushed it with a toothbrush. After that, the crackling was completely gone!!!

ALso - I wanted to glue 3 coincident 4 bar midi parts into a single 4 bar midi part. I recorded kik, snare and hats in multiple takes - then I want to combine into single midi part.

In cubase I just select all the parts (that are on top of each other) and hit the glue button.

Above all: piano-roll; midi/audio send & return; and events/clips duplication (and stacking! The overlapping of Cubasis events feels buggy/incomplete and hides notes visibility, with no clear logic on what events are brought-to-front).

(IMO) Do these 3 features like Nanostudio did then and there will be no single DAW that could compete with Cubasis.

3a8082e126