Engel 12v cable

[Jean Struweg]

Hi Gents

Any idea where I might be able to source the above? 4x4MW does not have stock, neither do I see any on Ebay.

It is quite frustrating that such a small, relatively inexpensive, yet crucial part is not readily available.

TIA.

Cheers,

Jean

[Marc Hall]

Jean what exactly are you after? 

Do you need the whole cable or just the end part with one of the socket connectors?

Are you able to send me a pic?

Marc

On 03 Jun 2026, at 15:43, Jean Struweg <jean.s...@gmail.com> wrote:



--
--
DO YOU WANT TO UNSUBSCRIBE ? Then send a blank email to:
overland-foru...@googlegroups.com
---
You received this message because you are subscribed to the Google Groups "overland-forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to overland-foru...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/overland-forum/CAJ45zOTtN5YgRAqPZ8XtLxzmNOKksuLoL8Ym%3DPLpen%3DYXyXk_A%40mail.gmail.com.

[Hennie Rautenbach]

I had a look online. Stupid expensive. Makes no sense...

To view this discussion visit https://groups.google.com/d/msgid/overland-forum/279AE1F5-AC53-4863-B10B-2F3B368AB976%40hall-house.co.za.

[Bertus Bekker]

Once made a mould to cast them - shall check if it is still around.

To view this discussion visit https://groups.google.com/d/msgid/overland-forum/CACSV_b84kfto5qzSODahEeWjwpGJicEVk6Trbx%2BxZS7%3DjRaMrw%40mail.gmail.com.

[Hennie Rautenbach]

I would simply solder onto the contacts and silicone seal. 

To view this discussion visit https://groups.google.com/d/msgid/overland-forum/CADpF_h%2BUVt7BcBCHp2gNXoeNURBap%2B42RWPi0iMJMG4D35LMng%40mail.gmail.com.

[Hannes Thirion]

https://www.takealot.com/12v-car-refrigerator-power-extension-cord-3-meters/PLID100372303

Hannes Thirion

To view this discussion visit https://groups.google.com/d/msgid/overland-forum/CACSV_b8ANEXwVXi-OSrcJ4G3-D1PxfxyfQM%2BdK5ND0DBZUCeBA%40mail.gmail.com.

[Ivan Marais]

Engel 60 :  The problem is the connection works loose after driving on corrugated roads for a long time. I had to replace my electrical motor once and I believe this was due to this lose connection.

After that I went ahead and soldered the pos and neg wires directly to the corresponding pins in the refridgerator socket. Filled the hole with good quality silicon glue. This has worked perfectly for the last more than 10 years.

Ivan Marais

To view this discussion visit https://groups.google.com/d/msgid/overland-forum/CA%2BzknQ8iA0%2BGk055fpfH8Y5PmS3zAu4F17uZfp7aJmLgpMyYag%40mail.gmail.com.

[Jean Struweg]

Thanks for all the responses gents!

The soldering option looks like the best solution.

Cheers

Jean

To view this discussion visit https://groups.google.com/d/msgid/overland-forum/CAL-twdFJTSPjmOTdbF9Mu9uR--zTKEscUVVfJV3LfrvHvtH7%2Bg%40mail.gmail.com.