WAN link test configuration

[Jon]

Hi Srivats, 

We have purchased and are using Ostinato to test a link at 10G. 

The manual says that Ostinato can re use the IPs of the interfaces that the traffic will be flowing on and we have used those IPs in a L3 setup, with the source and destinations aligning with what our interface IPs are. 

the ports are bound, are the correct ports and the VLANs are all set up, and the addresses ARP. We were able to pass traffic using Ciscos Trex. However with an Ostinato instance at each end we are not able to to send or receive traffic. 

Can anyone give us some pointers on how to do a wan test?

Thanks

[Srivats P]

Hi Jon,

See if this helps -

Bandwidth testing with Ostinato

Srivats

--
Get Ostinato News and Updates on Twitter - Follow @ostinato (http://twitter.com/ostinato)
---
You received this message because you are subscribed to the Google Groups "ostinato" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ostinato+u...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/ostinato/c6edce8a-d2db-4fc5-9000-d2e2e255655en%40googlegroups.com.