[freertos - Open Discussion and Support] freeRtos + Beagleboard xm + tcip stack

[SourceForge.net]

Read and respond to this message at:
https://sourceforge.net/projects/freertos/forums/forum/382005/topic/4825912
By: manishkanchan

Hi All,
I am Manish from bangalore.As a prt of my college project i am planning to
use freertos on beagleboard.I came across a port of freertos on beagleboardxm.Also,
I ant to estabilish a ethernet connection to the BBxm using free tcpip stack
such as FreeTCPIP/Iwip but i am confused.
Are there any usb to ethernet drivers available to be used in BBxm with freertos.If
not, then how do /where do i begin to develop such a driver?

Guide me
Regards
Manish Kanchan

_____________________________________________________________________________________
You are receiving this email because you elected to monitor this topic or entire forum.
To stop monitoring this topic visit:
https://sourceforge.net/projects/freertos/forums/forum/382005/topic/4825912/unmonitor
To stop monitoring this forum visit:
https://sourceforge.net/projects/freertos/forums/forum/382005/unmonitor

[SourceForge.net]

Read and respond to this message at:
https://sourceforge.net/projects/freertos/forums/forum/382005/topic/4825912

By: richardbarry

There is not currently official support for the processor used on the Beagle
Board, but there is some discussion on it in the FreeRTOS Interactive site if
that helps:

http://interactive.freertos.org/entries/20168818-freertos-port-for-ti-beagleboar
d-omap3530

Regards.

[SourceForge.net]

Read and respond to this message at:
https://sourceforge.net/projects/freertos/forums/forum/382005/topic/4825912

By: manishkanchan

Hi,
Yes i have been following this thread.As far as i infered, it is a port for
beagleboard ( which is good news for me ). Now i was looking to get ethernet
up and running.So was looking for some leads for device drive for smsc lan 9514
used in BBxm.
Hvae been going through some code lately but not getting enough informatoon
to start off.

Regards
Manish