My name is Tomasz (from Poland). I'm testing Nut/OS and I would like to
implement the program which is available in the Nut/OS wiki. This program
use ethernet protocol (eth0rtl).
I have problems with it. The problems are on Appendix as on the picture. I
dont know how i have to configure to *Nut/Os Configurator. *Could U help me
with it?
Also, I dont know the IP address my system - the program discoverer would
solve this problem? But how?
The program from this page:
http://www.ethernut.de/nutwiki/Network_Configuration_Using_Hard_Coded_Configuration
I look forward the answer.
--
Tomasz Zieliński
_______________________________________________
http://lists.egnite.de/mailman/listinfo/en-nut-discussion
On 15.03.2012 15:49, Tomasz Zielinski wrote:
> I have problems with it. The problems are on Appendix as on the picture. I
> dont know how i have to configure to *Nut/Os Configurator. *Could U help me
> with it?
I do not understand "problems are on Appendix as on the picture". May be
you can repeat your question in other words?
> Also, I dont know the IP address my system - the program discoverer would
> solve this problem? But how?
>
> The program from this page:
> http://www.ethernut.de/nutwiki/Network_Configuration_Using_Hard_Coded_Configuration
As it says, the IP is hard coded. It's on this line
#define MY_IP "192.168.192.111"
You will probably need a different address, so you need to change this
line. Some background information is available here
http://pl.wikipedia.org/wiki/IPv4
Regards,
Harald
_______________________________________________
http://lists.egnite.de/mailman/listinfo/en-nut-discussion