what is the reason to add this directory?
------------------------------------------------------------------------
r3908 | olereinhardt | 2012-02-25 18:23:13 +0100 (Sa, 25. Feb 2012) | 2 Zeilen
Added board directory for CM3 arch
Don't board specific definitions go into
nut/include/arch/[subarch/]board/
?
Or what definitions do go intend to put into
nut/arch/cm3/board/
Bye
--
Uwe Bonnes b...@elektron.ikp.physik.tu-darmstadt.de
Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------
_______________________________________________
http://lists.egnite.de/mailman/listinfo/en-nut-discussion
> what is the reason to add this directory?
>
> ------------------------------------------------------------------------
> r3908 | olereinhardt | 2012-02-25 18:23:13 +0100 (Sa, 25. Feb 2012) | 2 Zeilen
>
> Added board directory for CM3 arch
>
>
> Don't board specific definitions go into
> nut/include/arch/[subarch/]board/
> ?
> Or what definitions do go intend to put into
> nut/arch/cm3/board/
As an example see nut/arch/arm/board/*.c
(from trunk)
You can put board specific init code in here which will be automaticaly
selected during compile time according to the PLATFORM variable
configured in the configurator.
I need this e.g. to initialise the SDRAM controller and configure board
specific I/O pin settings.
bye,
Ole
--
Thermotemp GmbH, Embedded-IT
Embedded Hard-/ Software and Open Source Development,
Integration and Consulting
Geschäftsstelle Siegen - Steinstraße 67 - D-57072 Siegen -
tel +49 (0)271 5513597, +49 (0)271-73681 - fax +49 (0)271 736 97
Hauptsitz - Hademarscher Weg 7 - 13503 Berlin
Tel +49 (0)30 4315205 - Fax +49 (0)30 43665002
Geschäftsführer: Jörg Friedrichs, Ole Reinhardt
Handelsregister Berlin Charlottenburg HRB 45978 UstID DE 156329280
_______________________________________________
http://lists.egnite.de/mailman/listinfo/en-nut-discussion