How to Make Ionic Detox Foot Baths

662 views
Skip to first unread message

Courtney Kinear

unread,
Nov 17, 2009, 12:47:29 PM11/17/09
to natural-he...@googlegroups.com, natural-he...@yahoogroups.com, organ...@googlegroups.com

How to Make Ionic Detox Foot Baths

Contributor By Civita Dyer

An ionic detox foot bath is a foot spa used to cleanse your body of toxins
by drawing the toxins out of your feet. The process is supposed to
ionically and magnetically draw toxins out of your body. After placing your feet
in the foot baths for several minutes, the ionic foot baths are supposed to
draw the toxins out into the water, where you can see the toxins that are
drawn out as evidenced by the water changing color and "floaties" appearing.
There is much controversy as to whether or not these ionic foot baths
really work. Many people believe the water changes color and the "floaties"
appear because of the minerals and chemicals already present in the water.
Things You'll Need:
* 2 large bowls
* _9-volt battery_ (http://www.ehow. com/shop_ 9-volt-battery. html)
* 2 small alligator clips
* 2 stainless steel spoons
* 2 2-foot pieces of wire [stainless steel as copper corrodes]
* 1 tsp. sea salt
Instructions
Step 1 - Attach one end of each wire to an alligator clip. These alligator
clips can be purchased at most craft supply stores.
Step 2 - Attach the alligator clips to each of the spoons, creating two
separate hookups. It is recommended by some that you use only stainless steel
spoons, since stainless steel is best for conducting the low level of
electricity used in the ionic detox foot bath.
Step 3 - Add 1/2 tsp. sea salt and enough warm water to cover your foot to
each of the two bowls. This should be about 3 inches of water in each
bowl. Make sure the bowls are large enough for you to put each of your feet
into.
Step 4 - Attach one of the wires to the positive terminal on the 9-volt
battery. Attach the other wire to the negative terminal on the 9-volt
battery.
Step 5 - Place the positively charged spoon into one of the bowls of salt
water. Place the negatively charged spoon into the other bowl of salt
water.
Step 6 - Place one of your feet into the positively charged bowl of water
and the other foot into the negatively charged bowl of water. Leave your
feet in the ionic detox foot bath for at least 10 minutes. In about 2 or 3
minutes, you should be able to see the water begin to change color, and small
particles should appear floating about in the water (floaties).
Tips & Warnings
Do not attempt to assemble an ionic detox foot bath using a direct current
from your household electrical supply; this poses a threat of immediate
and deadly electrocution. The low voltage of the 9-volt battery produces very
little electrical charge, and most people say they feel only a slight
massaging sensation during the treatment. Do not use any sort of ionic detox
foot bath if you have any sort of heart arrhythmia or use a pacemaker or
defibrillator unless you check with your doctor first.
RELATED

How Do Ionic Foot Baths Detox the Body
One of the main misconceptions about ionic foot baths is that the color
change in the water is based on the toxins being removed from the body. This
is almost entirely untrue. The color in the water is due mostly to the
breakdown of the electrodes, the impurities in the water, and the oils and sweat
on the person's feet. The way a footbath works is by allowing the body to
absorb negative ions from the footbath. These ions travel through the body
and allow the toxins - usually positively charged - in the body to free
themselves from their bonds with the body's tissues and cells. The toxins, now
neutrally charged and bound with a negative ions, are then able to be
removed from the body by the liver and kidneys during the next few days. Many
people report darker urine color or stronger odor for a day or two after
their footbath treatment.
_http://www.ehow. com/how-does_ 4895797_ionic- foot-baths- detox-body. html_
(http://www.ehow. com/how-does_ 4895797_ionic- foot-baths- detox-body. html)
Monitoring the Water
As you sit through the foot bath treatment you will notice that the water
will begin to change color. It will go from clear to very dark and dirty
looking. Sometimes it will even appear black. There is no need to fear. This
just lets you know that the treatment is working. The toxins that are being
drawn out of your body through the bottom of your feet are causing the
water to change color.

The changing water colors let you know what part of your body the toxins
are coming from. For example, if the water is black, your liver and
gallbladder is being emptied of toxins. If the water is yellow, toxins are being
drawn out of your urinary tract, bladder, or prostate area. View the ionic
foot bath color chart located in the "Resources" section of this article for
more details about colouring.
Detoxification Foot Spa Frequently Asked Questions
_http://www.aquavida usa.com/Detox- FAQs.html_
(http://www.aquavida usa.com/Detox- FAQs.html)
(http://www.ehow. com/video_ 4399372_preparin g-foot-bath. html?optype= video)
------------ --------- --------- --------- --------- --------- -
Shan's Note: the following pdf file has instructions as well as a picture
showing how this is made. –
Excerpts & picture below from - MOLD and LYME TOXINS
_http://www.royalrif e.com/mold_ toxins.pdf_
(http://www.royalrif e.com/mold_ toxins.pdf)

For rapid detox he decided on the ionic foot tub. Instead of the Multi-Zap
he would use alligator test leads from Radio Shack to attach a 9-volt
battery. The positive went to the side with the left foot and the negative side
went to the right foot. Each side would have 1/8 to 1/2 teaspoon of Celtic
or Real Salt and 3 inches of warm water. Treatment time would be 30
minutes a day. It is possible that this setup would kill some pathogens in
addition to helping with detox.”
We are finding the ionic foot detox with the feet in separate containers
works much faster than with both feet in the same tub. This is most
effective when the Harmonic Generator is used as the voltage source so pathogens
can be removed during detox sessions. It is also possible to use a plain
9-volt battery. Please note that the feet must be in separate tubs with an
electrode each side for best results.
Any fully DC offset frequency source (pulsed DC) can be used for this.
Frequency generators like the F-Scan, F165 or any function generator can be
used. The GB-4000, Astropulse, BioSolutions and Global Wellness, BioSolutions
and other equipment that produces alternating current require a diode in
the circuit for foot detox purposes.
Be sure to use DC. If you are using an AC signal, put a small diode in
series with one wire.
The voltage should be just high enough to be felt. Most any frequency can
be used, but most people have used frequencies below 10000 Hz.”
------------ ----
Questions and Answers
Q:
Richard, I have been using the foot bath with a 9v battery and it seems to
be helping (along with the Thuja and Peach extract).
The end of the spoon and alligator clip that I use in the left/positive
tub is turning a dark color, almost like corrosion. What is this from and
should I keep using them?
A:
Even a stainless spoon may slowly show some corrosion and you can use a
pot scrubber on it. The alligator clip is not stainless and should be kept
out of the water if possible.

Reply all
Reply to author
Forward
0 new messages