Ip-com Access Point Configuration
Kena Sugrue
Compliant with IEEE 802.11ac Wave2, W66AP is a gigabit dual-band ceiling access point. Powered by 33 MU-MIMO technology, a single W66AP can simultaneously communicate with multiple clients, greatly improving throughput and enhancing user experience. W66AP offers reliable high-performance wireless solutions for indoor space with a mass of connected users, such as restaurants, conference rooms and classrooms.
Featuring various anti-interference algorithms, the built-in RF enables W66AP to evenly allocate bandwidth resources for multiple users, filter interference, and optimize date rate, offering you a guaranteed signal strength and reliable wireless experience.
You are allowed to configure and manage multiple W66AP in a centralized manner through all IP-COM access controllers (AC) and enterprise routers that include AC functionality, and enjoy simple management, configuration and monitoring of all access points.
The IEEE 802.11ac Wave 2-compliant iUAP-AC-LITE is a gigabit dual-band ceiling access point. It offers a concurrent data rate as high as of 1167 Mbps. Powered by MU-MIMO technology, a single iUAP-AC-LITE can simultaneously communicate with multiple clients, greatly improving the throughput and bettering user experience. The built-in omni-directional antennas optimize signal radiating directions, broadening the wireless coverage of a single AP. iUAP-AC-LITE can be powered by PoE sourcing equipment that compliant with IEEE 802.3af/at. With its ceiling installation design and sleek appearance, it simplifies wireless networking for enterprises, hotels and other public indoor spaces.
iUAP-AC-LITE supports RF optimization technology and integrates with various algorithms for interference mitigation. Features include multi-user fairness, interference filtering, speed optimization, and signal strength guarantee.
The ProFi Controller makes it easy to manage and monitor the whole ProFi devices in a real-time manner and cloud services enable a remote and secure access free from the restrictions of device location.
Pro-6-Lite is a 2x2 Wi-Fi 6 access point which offers an up to 3 Gbps aggregate wireless rate with both the 2.4 GHz and 5 GHz bands. With the application of OFDMA, DL/UL MU-MIMO, and SR (Spatial Reuse), its system capacity has been greatly increased compared with that with 802.11ac. In addition, with the TWT technology, Pro-6-Lite can centrally schedule awakening and sleeping of clients, reducing client confilicts and unneccessary awakenings, and therefore can be used in densely-populated scenarios where large quantities of concurrent access are required.
2.4GHz/5GHz full band configured high power independent signal amplifier, built-in 4dBi high gain antennas, strong signal, easily penetrate the wall, even weak signal can be received , easily cover 150. The reasonable layout of the antenna reduces interference from the same frequency, so that the Internet can be accessed even if you are at the edge of the range.
The 176*176*43.5mm size design is compact, elegant and stylish, which can perfectly fit into various scenes without destroying the decoration and can greatly save space. The hidden port design allows the network cable to be connected from the ceiling to the network port hidden at the back of the AP, making the wiring neat and simple.
When there are overlapping frequency bands in the working channels of neighbouring APs, the power of one AP will cause signal interference to the neighbouring APs. Through the RF optimization function, the channel and power of APs can be planned automatically to intelligently reduce the signal interference between APs and ensure the high-speed operation of wireless network.
Supports inter-AP load balancing, for wireless user dense areas, Pro-6-LITE works with AP controller, based on the AP's band capacity to do balancing, wireless terminals are assigned to different APs, balance the access load pressure, greatly ensure the stability of the AP and connection availability.
When moving within the coverage area, the Internet device automatically connects to the AP node with the best signal, with a switching latency as low as 50ms. Whether it's a video conference or a voice call, you can walk freely and unrestrictedly, with seamless WiFi signal switching, having smooth and stable Internet speed as always.
Supports 802.3at standard PoE network cable power supply, no external power supply needed. One network cable can connect to the switch and gain PoE power supply and data transmission. Real plug and play, no need to consider the socket location, power cable alignment, etc., convenient wiring, flexible networking, more convenient installation.
Supports unified deployment, configuration and management of equipment. Through ProFi Cloud Platform and ProFi APP, you can manage operation and maintenance anytime and anywhere, so you can easily grasp the whole situation without having to visit the site.
The AC1200 Dual Band Gigabit In-Wall Access Point (AP) is an IP-COM high-performance wireless access point designed for hotel rooms, villas, large apartments, KTV compartments and other places. Compliant with IEEE 802.11ac protocol and Wave 2 standard, and featured with the MU-MIMO technology, APs of this series support a dual-band concurrent wireless speed of up to 1167 Mbps. Adoption of the standard 86 mm x 86 mm in-wall design enables that the AP can be installed in any in-wall electrical boxes of 86 mm x 86 mm and 75 mm x 75 mm. Elegant and exquisite appearance goes well with the interior decoration design of the room. With the assistance of the existing in-wall electrical box structure, the AP helps you deploy your wireless networks easily, freeing you from time-consuming networking, and effectively addressing the weak WiFi signal problem in guest rooms.
With both pure 5 GHz band with less interference and 2.4 GHz band with stronger compatibility and longer transmission distance, the AP allows 2.4 GHz and 5 GHz wireless terminals to access at the same time, ensuring more wireless clients to access. The single AP has more than three times capacity of the traditional single band AP.
With the independent RF chip, the AP separates the power supply part and WiFi signal processing part, completely avoiding the interference of the power magnetic field on the WiFi signal. Boosted by the high-performance antenna, the AP can cover two side-by-side hotel rooms with full WiFi.
The AP can be powered by the PoE devices. With an Ethernet cable, the AP can be powered and transmit data at the same time. The maximum power supply distance of up to 100 meters enables the AP to be installed easily in hotels or your houses without breaking the existing power line layout.
The IEEE 802.11ac Wave 2-compliant W63AP is a gigabit dual-band ceiling access point. It offers a concurrent data rate as high as of 1167 Mbps. Powered by MU-MIMO technology, a single W63AP can simultaneously communicate with multiple clients, greatly improving the throughput and bettering user experience. The built-in omni-directional antennas optimize signal radiating directions, broadening the wireless coverage of a single AP. W63AP can be powered by PoE sourcing equipment that compliant with IEEE 802.3at. With its ceiling installation design and sleek appearance, it simplifies wireless networking for enterprises, hotels and other public indoor spaces.
W63AP supports RF optimization technology and integrates with various algorithms for interference mitigation. Features include multi-user fairness, interference filtering, speed optimization, and signal strength guarantee.
W63AP can be centrally managed and configured through all IP-COM access controllers (AC) and enterprise routers that includes AC functionality, relieving the burdens of network administrators for management, configuration and monitoring of all access points.
I've set my router up in Access Point mode (so that I can connect it to a wifi cable modem whose wifi has broken). Now I can't get to my WNDR3700v4 router login page. I've tried doing it over wife and by connecting ethernet cable straight from my computer to my WNDR3700v4. www.routerlogin.net doesn't work, nor www.routerlogin.com. No luck with 10.0.0.1, 10.0.0.2, 10.0.0.15, ( or
Really, the only reason I wanted to get back to the router login is so that I could have the device check for software updates in light of today's security flaw discovery. There must be some way to get this router to check for a software update (without completely resetting it to factory defaults)!
Most of the technological stuff you wrote went over my head. But it sounded like you were saying that the solution to this problem is for me to have set this up differently from the start...that I there's no way I can access the router login page now with it in its current configuration...that I have to reset and reinstall the Netgear wifi router. Is that correct?
FYI, I set up this router using its automated setup process. During that process it recommended I select "Access Point Mode." But I don't recall that it guided me to selecting a static IP address or anything else that sounds similar to what you wrote. I'm not saying you're incorrect. Just that the automated procedure didn't guide me to it, thus (apparently) leaving me with no way to ever access the router login again.
> [...] there's no way I can access the router login page now with it in
> its current configuration [...]
No, but you need to find it before you can talk to it by its address.
> [...] The easiest way to determine its address would be to ask the
> cable modem+router about its DHCP clients (Attached Devices, DHCP
> Clients, or some equivalent thing).
I know approximately nothing about your cable modem+router, so I
can't offer any specific procedure to get the desired information from
it.
This totally worked. I downloaded and installed Advanced IP Scanner, ran a scan, found a line in the output that seemed to match my NETGEAR router, went to that address, entered the default name/password, and I was into Genie. Fantastic!
c80f0f1006