Garador Operating Manual

[Socorro Henson]

TODISENGAGE THE OPENER It is recommended to disengsgre the door with the door in the closed position. CAUTION: When the opener is manually disengaged, the door is no longer locked. To lock the door manually, re-engage the opener after the door is closed.TO ENGAGE THE OPENER CAUTION: Do not use the string handle as a mechanism to open the door.Failure to comply may cause serious injury.

CODING REMOTE FROM THE OPENER The opener can only be operated from remote controllers that have been programmed into its memory. Up to 64 remotes can be programmed. tipSTEP ONE Switch power on and remove controls coverREMOTELY CODING A REMOTE CONTROL Remotely coding works when you have a pre-coded remote control and are in range of the opener. tipSTEP ONETake a pre-coded remote and press the button to duplicateSTEP THREEOpener ashes & beeps HOLD for 3 sec RELEASE HOLD for 3 sec Take new remote RELEASESTEP TWOUse a pen, HOLD for 2 sec the middle button through the coding holeSTEP FOUROpener stops ashing & beeping Press to test

Battery Type: 1 x CR2032. tipSTEP ONECheck Light Status TableSTEP TWOUse screwdriver to remove screws and openLight Status BatterySolidOKFlashingReplaceNo lightReplaceSTEP THREEUse non-metallic object to push out.WARNING!: The battery is hazardous and must be kept out of reach of children. The battery can cause severe or fatal injuries within 2 hours or less if swallowed or placed inside any part of the body. If you suspect the battery has been swallowed or placed inside any part of the body, SEEK IMMEDIATE medical attention.

Main Light = Service / Warning Indicator:Requirements for a service and user warnings are indicated after operation by the main light repeatable fashing OFF a number of times followed by a pause.The below table identifies the issues and remediesIssueRemedy1Normal operation (door is fully open2PE is precenting door from movingClear away any obstructions.Test Door. If unable to move the door and suspect beam is faulty, enter Safety Beam Emergency Close by pressing and holding a pre-coded transmitter button until the door closes.3Wireless Auto-Lock battery is lowChange Auto-lock battery4Wireless PE battery is lowChange PE Battery5Wireless Auto-Lock is not unlocked and preventingdoor movingCheck Auto-Lock, test by pressing emergency release button on the lock and the test door operation.6Maintenance is due after pre-set number of cycles.Contact dealer to arrange service.7Standby battery is faultyContact 0800 427 236 within New Zealand for assistance.8Door was obstructedClear away any obstructions and test door opens/closes correctly. (if the door is damaged, contact a door professional)9Motor overloaded or stalledContact dealer to arrange a door service.10Unit running on battery power (Optional)Main light will ash (3) three times at the start of the cycle to indicate the opener is running from battery backup and 10 ashes at the end of cycle. Check power supply.

Preventative servicing of your garage door and opener, is important. Your garage door is made up of numerous moving parts designed to lift and lower your door safely and efficiently. Ongoing preventative servicing ensures that your door continues to function within factory specifications, greatly reduces the risk of failure and repair bills down the track and ensure you maintain your Warranty.Refer to your Owners Opener Handbook for your service schedule available HERE. Refer to the installation manual for monthly testing procedures in Section 13 to ensure garage door is fit for use available HERE.Online warranty details are available HERE.

If the opener needs a service please call the dealer who installed the garage door opener (their contact details are usually on a sticker on the back of your garage door).For product assistance, general enquiry or more information, please visit: garador.co.nzor call 0800 427 236.

In most cases, the emergency release hangs down from the trolley on a red rope. Tugging down on the rope disconnects the trolley from the garage door opener, preventing the door from moving. When the opener is disengaged, the garage door opener will run, but the door will remain in place.

If you can manually raise your garage door with ease, the garage door itself is not the problem. This indicates that something in the opener system has malfunctioned. A professional garage door technician will be able to tell you whether it is best to replace the opener or repair the old one.

If you decide to operate the garage door manually, we recommend that you either close or brace the door before pulling the release cord and that nothing is in its operating path. If you attempt any adjustments, do not loosen or remove any part of the door or hardware that is under spring tension or the weight of the door. Make sure the door is not jammed. Check that its path is clear and unobstructed before operating the motor.

3a8082e126