Hello everyone!
I'm trying to implement a mqttsn client inside a microcontroller, and the nrf52840 should be used only as a way to communicate with other thread devices like the bound router.
I've seen that the ncp uses the spinel protocol to change info between my raspberry pi 3 and the nfc.
What I really want to know is:
- Is is possible to use spinel protocol between my microcontroller and another nrf52840 to communicate with other devices inside the thread network?
- If so, does anyone know how? I know the CLI has a UDP SEND command, but the message i'm sending contains a hex value equals to '\n', so the CLI interprets it as a end message character instead of a '\r\n'.
thats why I'm searching to implement the spinel protocol.
I really hope someone could help me
Thank you!
--
You received this message because you are subscribed to the Google Groups "openthread-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to openthread-use...@googlegroups.com.
To post to this group, send email to openthre...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openthread-users/896e64c9-9076-41ae-9e03-7e8396c86ab1%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.