Command class ALARM

27 visualizações
Pular para a primeira mensagem não lida

Anders Ekelund

não lida,
6 de out. de 2018, 04:38:3406/10/2018
para OpenRemote
I have a flooding sensor that seems to report:

COMMAND_CLASS_ALARM.ALARM_REPORT

05:38:22.681: Received: COMMAND_CLASS_ALARM.ALARM_REPORT, hex data: 71 05 00 00 00 FF 07 00 00

There are no OpenRemote designer command listed for this command class in:


In the spec it looks like above command class/command is replace by:

COMMAND_CLASS_NOTIFICATION.NOTIFICATION_REPORT

which is also not listed in supported OpenRemote designer commands.

What can I do to get this sensor to work?

Anders Ekelund

não lida,
6 de out. de 2018, 04:54:0006/10/2018
para OpenRemote
A Z-Wave sensor that is, just to clarify…

Thankful for any help!

orct...@gmail.com

não lida,
6 de out. de 2018, 21:33:5906/10/2018
para OpenRemote
I am not sure but may be try
ALARM_TYPE_HOME_SECURITY

Anders Ekelund

não lida,
11 de out. de 2018, 15:23:1711/10/2018
para OpenRemote
No, that is not the same command value. 

I have sent an email to OpenRemote support, regarding when or if they will include support for more up-to-date command classes such as COMMAND_CLASS_NOTIFICATION. Let's see if I get a reply...

Den lördag 6 oktober 2018 kl. 10:38:34 UTC+2 skrev Anders Ekelund:
Responder a todos
Responder ao autor
Encaminhar
0 nova mensagem