The parameter 'number_of_logic_tree_paths' is unknown, ignoring

[Sebastian Carrascal]

Hello, I'm having problemas to run an event_based sampling instead of full enumeration. I don't see any problem in the job. Can it be a bug? I'm workin with master version  3.25.0-gite2aa4c1

my job is:

[general]
description = xx.
calculation_mode = event_based
ses_seed=23

[rupture]
rupture_mesh_spacing = 5.0
width_of_mfd_bin = 0.1
area_source_discretization = 10.0
complex_fault_mesh_spacing = 10.0

[site_params]
site_model_file = ../../01ModeloSitio/05000AntioquiaModeloSitioMalla750.csv

[logic_tree]
gsim_logic_tree_file = ../../../../02Amenaza/MNAS/gmmLT_R3.xml
source_model_logic_tree_file = ../../../../02Amenaza/MNAS/ssmLT.xml

[hazard calculation]
investigation_time = 1
truncation_level = 3
ses_per_logic_tree_path = 20
number_of_logic_tree_paths = 10
maximum_distance = {'Subduction Interface': 350.,
'Subduction IntraSlab': 350.,
'Deep Seismicity': 350.,
'Active Shallow Crust': 250.,
'default': 250.}
minimum_magnitude = {'Subduction IntraSlab': 6.0,'Subduction Interface': 6.0, 'default': 5.0}
intensity_measure_types_and_levels={"PGA":logscale(0.005, 4.00, 20),"SA(0.1)":logscale(0.005, 4.00, 20),"SA(0.3)":logscale(0.005, 4.00, 20),"SA(0.6)":logscale(0.005, 4.00, 20),"SA(1.0)":logscale(0.005, 4.00, 20),"SA(1.5)":logscale(0.005, 4.00, 20)}
cross_correlation = GodaAtkinson2009
minimum_intensity = 0.005

[output]
mean = true
quantiles = 0.15, 0.50, 0.85
hazard_curves_from_gmfs = false
ground_motion_fields = True

[marco....@globalquakemodel.org]

What kind of problem are you experiencing?

--
You received this message because you are subscribed to the Google Groups "OpenQuake Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to openquake-use...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/openquake-users/3d652f7d-324a-4397-b8d7-e7d671a24d7fn%40googlegroups.com.

[Anirudh Rao]

Hi Sebastian,

The parameter in your job file number_of_logic_tree_paths should be number_of_logic_tree_samples.

Anirudh

[Sebastian Carrascal]

Wow. Turned out it was an eye-mind bug.

Thank you Anirudh!