How I can Specify Region in Job.ini File ?

[Amir Azizi]

Dear All , Hi 

How I can specify the region in job.ini file as below ?

I mean the coordinate define base on which parameters ?

Best Regards

Amir

# Generated automatically with IPT at Tue, 19 Oct 2021 13:19:29 -0000

[general]

description = Scenario calculation

calculation_mode = scenario

random_seed = 113

[Rupture information]

rupture_model_file = fault_rupture.xml

rupture_mesh_spacing = 15

[Hazard sites]

region_grid_spacing = 5

region = 33.3458862 34.6093445, 33.0992165 34.7026100, 33.1949921 34.8740730 , 33.4420662 34.7806168 

[Site conditions]

reference_vs30_value = 760

reference_vs30_type = measured

reference_depth_to_2pt5km_per_sec = 5

reference_depth_to_1pt0km_per_sec = 100

[Calculation parameters]

gsim_logic_tree_file = gmpe.xml

intensity_measure_types = PGA, 0.1,0.2,0.3,0.5,1

ground_motion_correlation_model = 

truncation_level = 3.0

maximum_distance = 200

number_of_ground_motion_fields = 100

[Nima Dolatabadi]

it is like:

region = top_left, top_right, bottom_right, bottom_left.

Every parameters are completely explained in openquake manual. Please read it carefully

https://docs.openquake.org/manuals/OpenQuake%20Manual%20%28latest%29.pdf

[Amir Azizi]

Dear Nima 

I specified the region by this method but the below error appear :

RuntimeError: Could not find any asset within the region!

[Nima Dolatabadi]

Please attach you job.ini to see if everything is fine

[Amir Azizi]

Dear Nima

Please check the attachment. 

Now OpenQuake works by these coordinates but the output is not in the region that I defined .I want to simulate a scenario risk model for Cyprus.

BR,

Amir

--
You received this message because you are subscribed to a topic in the Google Groups "OpenQuake Users" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/openquake-users/J_zFi3stygE/unsubscribe.
To unsubscribe from this group and all its topics, send an email to openquake-use...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openquake-users/6bd5dbcb-7099-458b-8293-244c2ea460a0n%40googlegroups.com.

[Amir Azizi]

Dear Nima , Hello Again! 

The attachment is the new output .

I specified the 4 points to define the region and also the output .

The output is out if Cyprus Map !

I am looking forward to your reply 

BR,

Amir

[Amir Azizi]

Dear Nima

Please see attachment . The Red Points area is the correct region that I want , but the Gray Point are the output of OpenQuake.
BR,

Amir

[Marlène BRAX]

Dear Amir,

It looks like you are not using the correct order for latitude and longitude in the input file.

Try to switch them because the region you are getting is the equivalent of your region if you switch latitude and longitude.

I hope I am clear in my explanation.

Good luck,

Marlène

You received this message because you are subscribed to the Google Groups "OpenQuake Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to openquake-use...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openquake-users/69ba30d4-c690-4fef-8a1a-64fc773345aan%40googlegroups.com.
<MicrosoftTeams-image.png>