Changing the orientation of components after alignment the board by fiducial

[Pavel]

Good day!

First, I want to express my gratitude for the excellent program.

Recent changes have made the program much easier to use.

In the latest versions of the program, I noticed one problem.

When aligning a PCB with a fiducial, the orientation of the components changes after alignment. 

This only happens on the bottom side of the PCB.

Top side

Before alignment

After alignment

Reticle has not changed his direction

Bottom side

Before alignment

After alignment

Reticle has changed his direction

I hope for your help.

[Marek T.]

Hi,
I've had one time the similar situation also with 1.0, and it was on the bottom side the same.

[Jason von Nieda]

I think it's this issue, possibly: https://github.com/openpnp/openpnp/issues/819

Jason

On Sun, Jun 16, 2019 at 5:07 AM Marek T. <marek.tw...@gmail.com> wrote:

Hi,
I've had one time the similar situation also with 1.0, and it was on the bottom side the same.

--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to openpnp+u...@googlegroups.com.
To post to this group, send email to ope...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/e4863ca8-c154-4f3e-bfb2-a636950dc428%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.