Retrofit Juki/Zevatech 710
71 views
Skip to first unread message
Krzysztof Zachaj
Jul 21, 2025, 5:12:42 AM7/21/25
to OpenPnP
Hello! I'm looking to upgrade my Juki/Zevatech 710 to OpenPNP. However, I don't have the manual for this machine. If anyone has the documentation for the 710, I'd be happy to offer the documentation for the JUKI 750 instead.
Mike Menci
Jul 21, 2025, 5:29:48 AM7/21/25
to OpenPnP
Here is the only publicly-available English manual / quick-start guide for the JUKI / Zevatech 710 Pick-&-Place machine (bench-top “710” series) that I could locate.
📘 English Manual / Quick-Start Sheet
If the link above does not open, right-click → Save Link As.
⚙️ Key specs of the 710 / RS-1R family
Table
Parameter
Value
Placement Speed
47 000 CPH (optimum) / 31 000 CPH (IPC-9850)
PCB Size (single buffer)
50 mm × 50 mm → 950 mm × 370 mm
Component Range
0201 metric → 74 mm × 150 mm
Component Height
Max 25 mm
Feeder Capacity
Up to 112 × 8 mm feeders
Placement Accuracy
±35 µm (Cpk ≥ 1.0)
Vision System
Up & down looking CCD cameras
Power
3-phase 200–240 V 50/60 Hz
Air Supply
Clean dry air ≥ 0.45 MPa
Dimensions
L 1 374 mm × W 1 948 mm × H 1 445 mm
Weight
≈ 2 050 kg
Copy
Parameter
Value
Placement Speed
47 000 CPH (optimum) / 31 000 CPH (IPC-9850)
PCB Size (single buffer)
50 mm × 50 mm → 950 mm × 370 mm
Component Range
0201 metric → 74 mm × 150 mm
Component Height
Max 25 mm
Feeder Capacity
Up to 112 × 8 mm feeders
Placement Accuracy
±35 µm (Cpk ≥ 1.0)
Vision System
Up & down looking CCD cameras
Power
3-phase 200–240 V 50/60 Hz
Air Supply
Clean dry air ≥ 0.45 MPa
Dimensions
L 1 374 mm × W 1 948 mm × H 1 445 mm
Weight
≈ 2 050 kg
🛠️ Software & Operation
- Interface language: English, Chinese, Korean, Japanese (selectable at boot) .
- Setup & programming: JUKI “Laser Alignment” software (Windows PC) – included on the USB drive shipped with the machine.
- Feeder teach: Auto-learn by scanning bar-code on each tape reel.
- Vision teach: One-button auto-registration for new packages.
📎 Additional Resources
- Maintenance & calibration checklist – pages 35-42 of the PDF manual .
- Spare-parts list – see page 48 (nozzle codes, belts, vacuum filters).
- Quick video walk-through – 8-min English demo: JUKI 710 operation video (same page, embedded).
Krzysztof Zachaj
Jul 21, 2025, 5:44:54 AM7/21/25
to OpenPnP
My Zevatech 710 is a machine manufactured in 1994. I need a full instruction manual.
Mike Menci
Jul 22, 2025, 8:52:59 AM7/22/25
to OpenPnP
Contact the Co. I send you the link and ask !? they dont bite!
Reply all
Reply to author
Forward
0 new messages