Ball bearing strip
342 views
Skip to first unread message
Matt Brocklehurst
Nov 7, 2016, 5:34:40 AM11/7/16
to OpenPnP
Hi guys
Hopefully someone will know this (probably an engineery type)... on my machine i've got a centering jaw and it had a very small ball race on each side of a slide rail - its best described as a piece of white (plastic?) about 3mm high 10mm wide with 5 or 6 bearings all the way along it, this sits either side of a slider that goes up and down in the channel. Unfortunately 2x of mine have dropped out over the weekend and have gone missing, and i'm not sure what to search for to see if somethings off the shelf - i've tried "bearing strip" etc.. into google but i'm hoping there is a better term for it
I hope my description is good... i've attached a picture of something i've found on google that looks similar
Thanks in advance
Matt
Hopefully someone will know this (probably an engineery type)... on my machine i've got a centering jaw and it had a very small ball race on each side of a slide rail - its best described as a piece of white (plastic?) about 3mm high 10mm wide with 5 or 6 bearings all the way along it, this sits either side of a slider that goes up and down in the channel. Unfortunately 2x of mine have dropped out over the weekend and have gone missing, and i'm not sure what to search for to see if somethings off the shelf - i've tried "bearing strip" etc.. into google but i'm hoping there is a better term for it
I hope my description is good... i've attached a picture of something i've found on google that looks similar
Thanks in advance
Matt
Cri S
Nov 7, 2016, 6:13:09 AM11/7/16
to OpenPnP
Ball cage, linear ball cage in this case. http://www.kmf-bearings.de/Inhalte/LLK%20100%20E.pdf
Reply all
Reply to author
Forward
0 new messages