32mm Reference Strip Feeder

46 views

Skip to first unread message

unread,

Nov 21, 2021, 1:46:18 AM11/21/21

to OpenPnP

Dear All,

Setting up a 32mm strip feeder required me to set the tape width to 30mm in order for the pick point be in the center of the component.

The chip is a 64 pin TQFP component. The tape is 32mm wide but has sprocket holes on each side.

ANSi/EIA-481 seems to indicate there is a 2mm additional offset between the component center and centre line of the sprocket holes for tapes >= 32mm.

Regards

Nom

Reply all

Reply to author

Forward

0 new messages