MKS SBASE 1.3 Firmware and Config Files

[Eagle Media]

Hello,

Does anybody have got working firmware and config files for this board?

Regards,
Mav

[Marek T.]

Makerbase 1.3 is clone of Smoothie. Missing ADC port on the pins.
You can load the same firmware and config as for Smothie. But remember there are some single pins changed - don't remember which one exactly.

[Arie Lashansky]

Hi

The File is not the same The GPIO needs to be changed not all the PINS used have fet Drivers I use a ULN2003.

To buffer the GPIO.I do not have a full working  system still work in progress.

Just make your Gpio in the file Match the Pin you use.

I think I used the same Pins as the Default but Just Buffrerd them.

Arie

[Marek T.]

I've written that some pins are changed.
So expected it's rather clear that some little modification of config taken from Smoothie is required.

[Eagle Media]

I guess they are using completelly different PIN config.
With the smoothie firmware and config file I cant even start this board.

Anybody have got shematics maybe?

[Cri S]

You want something like this?

--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to openpnp+unsubscribe@googlegroups.com.
To post to this group, send email to ope...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/383c4d66-c91e-4375-85f3-7e7824f4ee43%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Eagle Media]

Thank You, I thought (meant) about schematic, like usual.

[Bernd Walter]

On Thursday, February 1, 2018 at 7:59:16 PM UTC+1, Eagle Media wrote:

Thank You, I thought (meant) about schematic, like usual.

MKS don't publish their schematics.

[Marek T.]

Mav, what do you mean telling "With the smoothie firmware and config file I cant even start this board."?
Tell me what have you tried, something simple to check, and I can check it at my side. I have this board here but didn't play with it at all, except loading firmware from Smoothie in it.
I have also contacted to MKS and they told me that firmware from Smoothie is compatible with their MKS and the config with few exceptions as well.

[Cri S]

Schematic is available for several versions, not for v1.3, only v1.2 is available, check mksbase git for downloading it.

--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to openpnp+unsubscribe@googlegroups.com.
To post to this group, send email to ope...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/fa9f51a0-c2ef-4355-80a5-f851246d199f%40googlegroups.com.

[Eagle Media]

Hello Marek,

Obviuosly it was a config problem.

[Marek T.]

So it's been worked for you, are you fine?