Adding a panel of tiles

[ThePoll100]

Hello everyone. 

I have a panel of 10 tiles, arranged in two columns and five rows. 

Unfortunately, the tiles themselves don't have fiducials, but the frame of the entire panel has three. I managed to add the entire panel to the program and can align it with the selected elements, but I'd like to use the fiducials from the frame. 

Is it possible to add fiducials to the panel itself, or is there another way? 

Thank you for your help. 

Regards.

[Jan]

Hi!
You have to add them (IIRC manually) to the panel itself. In the job
tab your panel shall then have just the fiducials. Make sure to check
the "check fiducials" box on the panel as well.

Jan

> --
> You received this message because you are subscribed to the Google
> Groups "OpenPnP" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to openpnp+u...@googlegroups.com
> <mailto:openpnp+u...@googlegroups.com>.
> To view this discussion visit https://groups.google.com/d/msgid/openpnp/
> CA%2BSVFEC_X4y35A3wzs4uTLVbEDcTXOxgQY146Co7B_xhCji2Lw%40mail.gmail.com
> <https://groups.google.com/d/msgid/openpnp/
> CA%2BSVFEC_X4y35A3wzs4uTLVbEDcTXOxgQY146Co7B_xhCji2Lw%40mail.gmail.com?
> utm_medium=email&utm_source=footer>.

[tonyl...@gmail.com]

You may want to start by reading the Recommended Workflow section of the User Manual. It has a subsection on creating panels.

[ThePoll100]

Hey, thanks for your help.

To unsubscribe from this group and stop receiving emails from it, send an email to openpnp+u...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/openpnp/07b3d930-99f4-4070-9ca2-9567022a11dan%40googlegroups.com.