"X and Y vision offset fields" ?

[Brian Piccioni]

Thanks in advance for the help.

I have a PandaPlacer and have been having issues with transparent tape. (For some reason I can't find 10uF caps not in transparent tape, but that is another issues).

I understand I can disable the visual calibration function (https://forum.pandaplacer.com/t/no-line-of-sprocket-holes-can-be-recognized/56), however I also came across this https://github.com/openpnp/openpnp/pull/1954 where  alextigernick pushed a fix.

In the Instructions for Use it says

"Jog away from the typical vision point(between the two holes) until the tape appears brightly lit around both holes. Note the distance you jogged into the X and Y vision offset fields."

Unfortunately - and I am a newbie - I have not idea how to " Note the distance you jogged into the X and Y vision offset fields."

I imagine I can figure out the distance, but where are the X and Y vision offset fields that I can change?

Thanks

[Brian Piccioni]

I think I understand. The instructions are for a push which is not (yet?) part of the release. 

In the event I want to try the feature I will need to pull the code from github and run it.

Sorry for my confusion.

--
You received this message because you are subscribed to a topic in the Google Groups "OpenPnP" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/openpnp/EuE5ngWL_FI/unsubscribe.
To unsubscribe from this group and all its topics, send an email to openpnp+u...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/openpnp/e2a15806-e985-43f4-a13e-67537a43ab58n%40googlegroups.com.