Supermicro SSE-X3648SR/D2060

Catalin Bostan

unread,

Dec 11, 2017, 11:10:51 AM12/11/17

to opennetworklinux

I have trouble with Supermicro SSE-X3648SR/D2060.

Is not a supported platform but my hope was minimal difference between Supermicro design and Celestica Redstone-XP standard.

output from ofdpa

"version 0.0.0.0 -- Built on Wed Oct 5 2016 at 18:45:53 UTC

Initializing the system.

WARNING: bcm esw command MemWatch not alphabetized

DMA pool size: 16777216

PCI unit 0: Dev 0xb854, Rev 0x03, Chip BCM56854_A2, Driver BCM56850_A0

Found board: Celestica Redstone-XP

SOC unit 0 attached to PCI device BCM56854_A2

rc: unit 0 device BCM56854_A2

rc: Port modes initialized

rc: common SDK init complete

0:_soc_mem_array_sbusdma_read: L2_ENTRY.ipipe0 interrupt timeout

0:_soc_l2x_thread: soc_l2x_thread: DMA failed: Operation timed out

Error: uC proxy access aborted t1 u=0 p=1 addr=130 wr=1 ram=1 d=80 m=ffff usec=637965

Error: uC proxy access aborted t1 u=0 p=29 addr=130 wr=1 ram=1 d=80 m=ffff usec=629224

0:soc_miim_write: MiimTimeOut:soc_miim_write, timeout (id=0xd1 addr=0x1e data=0x0000)

Error: uC proxy access aborted t1 u=0 p=33 addr=130 wr=1 ram=1 d=80 m=ffff usec=3290533

Error: uC proxy access aborted t1 u=0 p=51 addr=130 wr=1 ram=1 d=80 m=ffff usec=626431"

....

Any hints?

Steven Noble

unread,

Dec 11, 2017, 11:31:48 AM12/11/17

to Catalin Bostan, opennetworklinux

Is the OF-DPA from supermicro?

--
You received this message because you are subscribed to the Google Groups "opennetworklinux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to opennetworklinux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Catalin Bostan

unread,

Dec 11, 2017, 11:37:26 AM12/11/17

to opennetworklinux

No. ofdpa-redstone-xp-2.0.4.0-ONL-amd64.deb

Steven Noble

unread,

Dec 11, 2017, 11:56:10 AM12/11/17

to Catalin Bostan, opennetworklinux

There is a high possibility that it won't work. OFDPA needs to know all of the port mapping, etc for the broadcom chip. See if you can get it from supermicro.

Catalin Bostan

unread,

Dec 11, 2017, 12:04:11 PM12/11/17

to opennetworklinux

Yeah. I know. I asked , but i tried also with what we have..no joy.

Thanks,

To unsubscribe from this group and stop receiving emails from it, send an email to opennetworklin...@googlegroups.com.

reza toghraee

unread,

Dec 11, 2017, 3:47:06 PM12/11/17

to Catalin Bostan, opennetworklinux

Hi Catalin

Which ofdpa version are you using?

From the log, it seems it has successfully identified the SOC and connected via PCI

However the errors starting with 0_soc_I2x , seems that the I2C device Id in this platform is different and oy might be the reason for failure.

Can you do a I2C device scan/ detect ?

Best Regards

Reza Toghraee

--

Catalin Bostan

unread,

Dec 12, 2017, 4:10:55 AM12/12/17

to opennetworklinux

Hello,

i2cdetect -l

i2c-0 smbus SMBus I801 adapter at f000 SMBus adapter

i2c-1 smbus SMBus iSMT adapter at dffd0000 SMBus adapter

root@localhost:/broadcom/ofdpa# i2cdetect -F 0

Functionalities implemented by /dev/i2c-0:

I2C no

SMBus Quick Command yes

SMBus Send Byte yes

SMBus Receive Byte yes

SMBus Write Byte yes

SMBus Read Byte yes

SMBus Write Word yes

SMBus Read Word yes

SMBus Process Call no

SMBus Block Write yes

SMBus Block Read yes

SMBus Block Process Call no

SMBus PEC yes

I2C Block Write yes

I2C Block Read yes

root@localhost:/broadcom/ofdpa# i2cdetect -F 1

Functionalities implemented by /dev/i2c-1:

I2C no

SMBus Quick Command yes

SMBus Send Byte yes

SMBus Receive Byte yes

SMBus Write Byte yes

SMBus Read Byte yes

SMBus Write Word yes

SMBus Read Word yes

SMBus Process Call yes

SMBus Block Write yes

SMBus Block Read yes

SMBus Block Process Call no

SMBus PEC yes

I2C Block Write yes

I2C Block Read yes

after launch ofdpa and ofagentapp i have following messages:

root@localhost:/broadcom/ofdpa# ./ofdpa

version 0.0.0.0 -- Built on Wed Oct 5 2016 at 18:45:53 UTC

Initializing the system.

WARNING: bcm esw command MemWatch not alphabetized

DMA pool size: 16777216

PCI unit 0: Dev 0xb854, Rev 0x03, Chip BCM56854_A2, Driver BCM56850_A0

Found board: Celestica Redstone-XP

SOC unit 0 attached to PCI device BCM56854_A2

rc: unit 0 device BCM56854_A2

rc: Port modes initialized

rc: common SDK init complete

Calling rpcsrvTask.

Error: uC proxy access aborted t1 u=0 p=12 addr=130 wr=1 ram=1 d=80 m=ffff usec=630188

Error: uC proxy access aborted t1 u=0 p=18 addr=130 wr=1 ram=1 d=80 m=ffff usec=630199

Error: uC proxy access aborted t1 u=0 p=23 addr=130 wr=1 ram=1 d=80 m=ffff usec=630135

0:_soc_reg32_get: _soc_reg32_get: invalid S-Channel reply, expected READ_REG_ACK:

HDR[NACK=0 BANK=0 DMA=0 ECODE=0 ERR=0 DLEN=8 ACC=3 DPORT=1 OPC=13=WRITE_REG_CMD]

DW[ 0]=0x3410c400 DW[ 1]=0x50000207

0:_soc_reg32_get: _soc_reg32_get: invalid S-Channel reply, expected READ_REG_ACK:

HDR[NACK=0 BANK=0 DMA=0 ECODE=0 ERR=0 DLEN=4 ACC=6 DPORT=2 OPC=13=WRITE_REG_CMD]

DW[ 0]=0x34218200 DW[ 1]=0x28001309

0:_soc_reg32_get: _soc_reg32_get: invalid S-Channel reply, expected READ_REG_ACK:

HDR[NACK=0 BANK=0 DMA=0 ECODE=0 ERR=0 DLEN=4 ACC=3 DPORT=2 OPC=13=WRITE_REG_CMD]

DW[ 0]=0x3420c200 DW[ 1]=0x0800120a

0:_soc_reg32_get: _soc_reg32_get: invalid S-Channel reply, expected READ_REG_ACK:

HDR[NACK=0 BANK=0 DMA=0 ECODE=0 ERR=0 DLEN=0 ACC=0 DPORT=5 OPC=14=WRITE_REG_ACK]

DW[ 0]=0x38500000 DW[ 1]=0x2a040000

Error: uC proxy access aborted t1 u=0 p=29 addr=130 wr=1 ram=1 d=80 m=ffff usec=630146

Error: uC proxy access aborted t1 u=0 p=38 addr=130 wr=1 ram=1 d=80 m=ffff usec=626792

Error: uC proxy access aborted t1 u=0 p=47 addr=130 wr=1 ram=1 d=80 m=ffff usec=630083

Error: uC proxy access aborted t1 u=0 p=7 addr=130 wr=1 ram=1 d=80 m=ffff usec=625277

Error: uC proxy access aborted t1 u=0 p=11 addr=130 wr=1 ram=1 d=80 m=ffff usec=637239

Error: uC proxy access aborted t1 u=0 p=13 addr=130 wr=1 ram=1 d=80 m=ffff usec=636813

Error: uC proxy access aborted t1 u=0 p=14 addr=130 wr=1 ram=1 d=80 m=ffff usec=636909

Error: uC proxy access aborted t1 u=0 p=15 addr=130 wr=1 ram=1 d=80 m=ffff usec=636642

Error: uC proxy access aborted t1 u=0 p=16 addr=130 wr=1 ram=1 d=80 m=ffff usec=636912

Error: uC proxy access aborted t1 u=0 p=17 addr=130 wr=1 ram=1 d=80 m=ffff usec=637046

Error: uC proxy access aborted t1 u=0 p=19 addr=130 wr=1 ram=1 d=80 m=ffff usec=636682

Error: uC proxy access aborted t1 u=0 p=20 addr=130 wr=1 ram=1 d=80 m=ffff usec=637245

Error: uC proxy access aborted t1 u=0 p=21 addr=130 wr=1 ram=1 d=80 m=ffff usec=636804

0:_soc_sbusdma_desc: IP COUNTERS polling timeout

0:_soc_sbusdma_port_ctr_cb: Counter SBUSDMA failed: Handle:1 port:0.

Error: uC proxy access aborted t1 u=0 p=22 addr=130 wr=1 ram=1 d=80 m=ffff usec=636754

Error: uC proxy access aborted t1 u=0 p=24 addr=130 wr=1 ram=1 d=80 m=ffff usec=637022

Error: uC proxy access aborted t1 u=0 p=25 addr=130 wr=1 ram=1 d=80 m=ffff usec=636276

Error: uC proxy access aborted t1 u=0 p=26 addr=130 wr=1 ram=1 d=80 m=ffff usec=637188

Error: uC proxy access aborted t1 u=0 p=27 addr=130 wr=1 ram=1 d=80 m=ffff usec=636919

Error: uC proxy access aborted t1 u=0 p=28 addr=130 wr=1 ram=1 d=80 m=ffff usec=637213

Error: uC proxy access aborted t1 u=0 p=30 addr=130 wr=1 ram=1 d=80 m=ffff usec=637439

0:_soc_sbusdma_desc: EP COUNTERS polling timeout

0:_soc_sbusdma_port_ctr_cb: Counter SBUSDMA failed: Handle:2 port:0.

......

./ofagentapp

Dec 12 09:07:07.140 ofagent: MSG: version 0.0.0.0 -- Built on Wed Oct 5 2016 at 20:22:43 UTC

OF Datapath ID: 0x000000000000DA7A

Initializing the system.

WARNING: bcm esw command MemWatch not alphabetized

DMA pool size: 16777216

PCI unit 0: Dev 0xb854, Rev 0x03, Chip BCM56854_A2, Driver BCM56850_A0

Found board: Celestica Redstone-XP

SOC unit 0 attached to PCI device BCM56854_A2

0:_soc_mem_array_sbusdma_read: FP_TCAM.ipipe0 interrupt timeout

0:_soc_mem_scan_ser_read_ranges: soc_mem_scan_thread: TCAM read failed: Operation timed out

0:_soc_mem_scan_thread: AbnormalThreadExit:bcmMEM_SCAN.0, TCAM scan failed: Operation timed out

tscmod_pll_lock_wait : Error. p=8 Timeout PLL lock:

tscmod_tier1_selector (PLL_LOCK_WAIT ): FATAL: Timeout. Unit/Port/Phy_ad 0/8/0xa4

Error: u=0 p=12 port_mode_sel=5 undefined

TSCMOD : uC download: u=0 p=45 timeout: wait for checksum

tscmod_tier1_selector (FIRMWARE_SET ): FATAL: Timeout. Unit/Port/Phy_ad 0/45/0xe9

Warning: u=0 p=45 uC crc mismatch 0 vs expected a081

0:_soc_sbusdma_desc: IP COUNTERS polling timeout

Catalin Bostan

unread,

Dec 12, 2017, 4:44:53 AM12/12/17

to opennetworklinux

I2C chips identified so far:

1x PCA9506DGG

https://www.nxp.com/docs/en/data-sheet/PCA9505_9506.pdf

2x PCA9548A

https://www.nxp.com/docs/en/data-sheet/PCA9548A.pdf

on motherboard and

1x PCA9548A

on ASIC Board

Reply all

Reply to author

Forward