OFDPA installation issue on RedstoneXP D2060 Celestica

[Babu Naveen]

Hi,

I am facing an issue while installing ofdpa-i.12.1.1_12.1.1+accton1.7-1_amd64.deb on RedstoneXP D2060  celestica switch

I have brought up ONL on RedstoneXP D2060 Celestica switch version "ONL-2.0.0-ONL-OS-DEB8-2016-09-04.1726-3f30495-AMD64-SWI-INSTALLER" from https://www.opennetlinux.org/binaries/ 

and followed the steps as per https://wiki.onosproject.org/display/ONOS/%5BArchived%5D+Hardware+Switch+Installation+Guide

so while performing following step, 

dpkg -i --force-overwrite /mnt/flash2/ofdpa-i.12.1.1_12.1.1+accton1.7-1_amd64.deb




ONL is throughing an error 

root@localhost:~# dpkg -i --force-overwrite /mnt/flash2/ofdpa-i.12.1.1_12.1.1+accton1.7-1_amd64.deb

(Reading database ... 14986 files and directories currently installed.)2.1.1_12.1

Preparing to replace ofdpa-i.12.1.1 12.1.1+accton1.7-1 (using .../ofdpa-i.12.1.1_12.1.1+accton1.7-1_amd64.deb) ...

Unpacking replacement ofdpa-i.12.1.1 ...

Setting up ofdpa-i.12.1.1 (12.1.1+accton1.7-1) ...

cat: /etc/onl_platform: No such file or directory

Failed: OFDPA is not supported for platform

dpkg: error processing ofdpa-i.12.1.1 (--install):

 subprocess installed post-installation script returned error exit status 1

Errors were encountered while processing: ofdpa-i.12.1.1

can some one point out what could have been the reason?, is /etc/onl_platform should be specific to platform which should be supported by ONL?

Thanks in advance,

Babu

[Steven Noble]

Hi Babu,

The accton ofdpa binaries will not work on the Celestica box.

If this was an accton box, the quick fix would be to copy /etc/onl/platform over to /etc/onl_platform and try the install again. In onl 2 we moved the files into their own directory.

--
You received this message because you are subscribed to the Google Groups "opennetworklinux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to opennetworklinux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Steven Noble]

Hi Babu,

There is a celestica version of ofdpa on broadcom's github :

https://github.com/Broadcom-Switch/of-dpa/tree/master/bin/cel_x86_64-trident2-ub12

Steven Noble

October 5, 2016 at 6:21 AM

Hi Babu,

The accton ofdpa binaries will not work on the Celestica box.

If this was an accton box, the quick fix would be to copy /etc/onl/platform over to /etc/onl_platform and try the install again. In onl 2 we moved the files into their own directory.

Babu Naveen

October 5, 2016 at 3:42 AM

Hi,

I am facing an issue while installing ofdpa-i.12.1.1_12.1.1+accton1.7-1_amd64.deb on RedstoneXP D2060  celestica switch

I have brought up ONL on RedstoneXP D2060 Celestica switch version "ONL-2.0.0-ONL-OS-DEB8-2016-09-04.1726-3f30495-AMD64-SWI-INSTALLER" from https://www.opennetlinux.org/binaries/ 

and followed the steps as per https://wiki.onosproject.org/display/ONOS/%5BArchived%5D+Hardware+Switch+Installation+Guide

so while performing following step, 

dpkg -i --force-overwrite /mnt/flash2/ofdpa-i.12.1.1_12.1.1+accton1.7-1_amd64.deb




ONL is throughing an error 

root@localhost:~# dpkg -i --force-overwrite /mnt/flash2/ofdpa-i.12.1.1_12.1.1+accton1.7-1_amd64.deb

(Reading database ... 14986 files and directories currently installed.)2.1.1_12.1

Preparing to replace ofdpa-i.12.1.1 12.1.1+accton1.7-1 (using .../ofdpa-i.12.1.1_12.1.1+accton1.7-1_amd64.deb) ...

Unpacking replacement ofdpa-i.12.1.1 ...

Setting up ofdpa-i.12.1.1 (12.1.1+accton1.7-1) ...

cat: /etc/onl_platform: No such file or directory

Failed: OFDPA is not supported for platform

dpkg: error processing ofdpa-i.12.1.1 (--install):

 subprocess installed post-installation script returned error exit status 1

Errors were encountered while processing: ofdpa-i.12.1.1

can some one point out what could have been the reason?, is /etc/onl_platform should be specific to platform which should be supported by ONL?

Thanks in advance,

Babu

--
You received this message because you are subscribed to the Google Groups "opennetworklinux" group.

To unsubscribe from this group and stop receiving emails from it, send an email to opennetworklin...@googlegroups.com.

[Babu Naveen]

Hi Steve,

Thanks for the response, 

I did try the below link too after posting here.

a.       From the GIT hub of OFDPA  found an OFDPA Debian package for Cel_x86_64 version

 

https://github.com/Broadcom-Switch/of-dpa/tree/master/bin/cel_x86_64-trident2-ub12

tried to install on ONL Debian 8 then it through an error of miss matched kernel version

 

# dpkg -i --force-overwrite /mnt/flash2/ofdpa-redstone-xp_0.2.

(Reading database ... 14954 files and directories currently installed.)

Preparing to unpack .../ofdpa-redstone-xp_0.2.0.4.1_amd64.deb ...

Unpacking ofdpa-redstone-xp (0.2.0.4.1) over (0.2.0.4.1) ...

dpkg: dependency problems prevent configuration of ofdpa-redstone-xp:

ofdpa-redstone-xp depends on linux-image-3.5.0-23-generic; however:

  Package linux-image-3.5.0-23-generic is not installed.

ofdpa-redstone-xp depends on redstone-xp; however:

  Package redstone-xp is not installed.

dpkg: error processing package ofdpa-redstone-xp (--install):

dependency problems - leaving unconfigured

Errors were encountered while processing:

ofdpa-redstone-xp

root@localhost:/etc# uname -a

Linux localhost 3.2.65-1+deb7u2-OpenNetworkLinux #2 SMP Sun Sep 4 18:20:28 UTC 2016 x86_64 GNU/Linux

root@localhost:/etc# ls

 

can you point me for the required ONL version which supports linux 3.5.0-23 or OFDPA which is 3.2.65 version or any other mechanism to work with RedstoneXP D2060 fabric

Thanks,

Babu

[Steven Noble]

Hi Babu,

I put some files up at http://opennetlinux.org/binaries/ofdpa

One is just the kernel modules, the other is the kernel modules + ofdpa binary/library for the Celestica box.

Let me know if this helps.

Babu Naveen

October 5, 2016 at 10:59 AM

Steven Noble

October 5, 2016 at 10:49 AM

[Steven Noble]

Hi Again Babu,

I was finally able to compile both 2.0.4.0 and 3.0.2.0 for the celstica box:

ofdpa-redstone-xp_2.0.4.0_amd64.deb 
ofdpa-redstone-xp_3.0.2.0_amd64.deb

http://opennetlinux.org/binaries/ofdpa

Let me know if this works for you.

Babu Naveen

October 5, 2016 at 10:59 AM

Steven Noble

October 5, 2016 at 10:49 AM

[Nandan Bharadwaj]

Hi Stevev,

Can you share the reference for building the OFDPA deb package?

Regards,
Nandan

[Steven Noble]

Hi Nandan,

Do you have access to the odp (source) of ofdpa from broadcom? If so I can give you a general walk through. It is very similar to building opennsl.

To unsubscribe from this group and stop receiving emails from it, send an email to opennetworklinux+unsubscribe@googlegroups.com.

[Babu Naveen]

Hi Steve,

I am not able to download the files in this path

http://opennetlinux.org/binaries/ofdpa

looks like files have moved ?

Thanks,

Babu

[Steven Noble]

Hi Babu,

Sorry about that, I can't have _ in the file name or it will be blocked from downloading.  I fixed the names and the packages should be accessible.

Babu Naveen

October 5, 2016 at 10:49 PM

Hi Steve,

I am not able to download the files in this path

http://opennetlinux.org/binaries/ofdpa

looks like files have moved ?

Thanks,

Babu

On Thursday, 6 October 2016 02:01:02 UTC+5:30, Steven Noble wrote:

--
You received this message because you are subscribed to the Google Groups "opennetworklinux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to opennetworklin...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Steven Noble

October 5, 2016 at 1:30 PM

[Babu Naveen]

Hi Steve,

I am able to download now.

Thanks for the information, will try with these bins.

Thanks,

Babu

[Nandan Bharadwaj]

Hi Steve,

I have the downloaded of-dpa source from the git master branch. I have read through $OFDPA_ROOT/doc/html/OFDPA_BUILDING.html explanation of building the of-dpa source, it doesn't say anything about building a deb package. I'll go through the opennsl building steps and will follow them for of-dpa.

Regards,
Nandan

[Babu Naveen]

Hi Steve,

Still the same issue, and while unpack the version s are 0.0.0.0, 

ONL Version : ONL-2.0.0-ONL-OS-DEB8-2016-09-04.1726-3f30495-AMD64-SWI-INSTALLER

 

localhost:~# dpkg -i --force-overwrite /mnt/flash2/ofdpa-redstone-xp-3.0.2.0-amd64.deb

(Reading database ... 14905 files and directories currently installed.)

Preparing to unpack .../ofdpa-redstone-xp-3.0.2.0-amd64.deb ...

Unpacking ofdpa-redstone-xp (0.0.0.0) over (0.0.0.0) ...

dpkg: dependency problems prevent configuration of ofdpa-redstone-xp:

 ofdpa-redstone-xp depends on linux-image-3.5.0-23-generic; however:

  Package linux-image-3.5.0-23-generic is not installed.

 ofdpa-redstone-xp depends on redstone-xp; however:

  Package redstone-xp is not installed.

dpkg: error processing package ofdpa-redstone-xp (--install):

 dependency problems - leaving unconfigured

Errors were encountered while processing:

 ofdpa-redstone-xp

root@localhost:~#

did I miss something? 

Thanks,

Babu

[Steven Noble]

Hi Nandan,

The github code is only the public part of ofdpa, you should be able to recompile the kernel modules but that is all I believe.

To compile ofdpa proper you need to get the source from broadcom. To make a package, go into the output directory and the sub directory of the system you want to build. The command you use to create a package is "make package".

To unsubscribe from this group and stop receiving emails from it, send an email to opennetworklinux+unsubscribe@googlegroups.com.

[Nandan Bharadwaj]

Thanks Steve.

[Steven Noble]

Hi Babu,

Did it install the files anyway? The version thing caught me out earlier, I am missing the way to set that. The kernel requirements seem to be hard coded in. I would need to edit the package to fix it.

If it installed the files, you should be able to start it as the kernel modules are compiled for onl.

To unsubscribe from this group and stop receiving emails from it, send an email to opennetworklinux+unsubscribe@googlegroups.com.

[Babu Naveen]

Hi Steve,

As per the logs it didn't proceed during unpacking itself, , is it Unpacking ofdpa-redstone-xp (0.0.0.0) over (0.0.0.0) ... could create problem?

Thanks,

Babu 

On Thursday, 6 October 2016 11:50:07 UTC+5:30, Steven Noble wrote:

Hi Babu,

Did it install the files anyway? The version thing caught me out earlier, I am missing the way to set that. The kernel requirements seem to be hard coded in. I would need to edit the package to fix it.

If it installed the files, you should be able to start it as the kernel modules are compiled for onl.

On Oct 5, 2016 11:12 PM, "Babu Naveen" <babu....@gmail.com> wrote:

Hi Steve,

Still the same issue, and while unpack the version s are 0.0.0.0 

[Steven Noble]

Hi Babu,

I rebuilt the package to not require the kernel or redstone-xp

http://opennetlinux.org/binaries/ofdpa/ofdpa-redstone-xp-2.0.4.0-ONL-amd64.deb

Let me know if that installs, I confirmed it on my redstone.

root@localhost:/broadcom/ofdpa# lsmod
Module                  Size  Used by
linux_user_bde         16592  0
linux_kernel_bde       38730  1 linux_user_bde
root@localhost:/broadcom/ofdpa# ./client_grouptable_dump
No entries found.
root@localhost:/broadcom/ofdpa# cat /etc/onl/platform
x86-64-cel-redstone-xp-r0

Babu Naveen

October 5, 2016 at 11:27 PM

Steven Noble

October 5, 2016 at 11:20 PM

Hi Babu,

Did it install the files anyway? The version thing caught me out earlier, I am missing the way to set that. The kernel requirements seem to be hard coded in. I would need to edit the package to fix it.

If it installed the files, you should be able to start it as the kernel modules are compiled for onl.

Babu Naveen

October 5, 2016 at 11:12 PM

Hi Steve,

Still the same issue, and while unpack the version s are 0.0.0.0, 

ONL Version : ONL-2.0.0-ONL-OS-DEB8-2016-09-04.1726-3f30495-AMD64-SWI-INSTALLER

 

localhost:~# dpkg -i --force-overwrite /mnt/flash2/ofdpa-redstone-xp-3.0.2.0-amd64.deb

(Reading database ... 14905 files and directories currently installed.)

Preparing to unpack .../ofdpa-redstone-xp-3.0.2.0-amd64.deb ...

Unpacking ofdpa-redstone-xp (0.0.0.0) over (0.0.0.0) ...

dpkg: dependency problems prevent configuration of ofdpa-redstone-xp:

 ofdpa-redstone-xp depends on linux-image-3.5.0-23-generic; however:

  Package linux-image-3.5.0-23-generic is not installed.

 ofdpa-redstone-xp depends on redstone-xp; however:

  Package redstone-xp is not installed.

dpkg: error processing package ofdpa-redstone-xp (--install):

 dependency problems - leaving unconfigured

Errors were encountered while processing:

 ofdpa-redstone-xp

root@localhost:~#

did I miss something? 

Thanks,

Babu

On Thursday, 6 October 2016 11:25:14 UTC+5:30, Babu Naveen wrote:

--
You received this message because you are subscribed to the Google Groups "opennetworklinux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to opennetworklin...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Babu Naveen

October 5, 2016 at 10:55 PM

Hi Steve,

I am able to download now.

Thanks for the information, will try with these bins.

Thanks,

Babu

On Thursday, 6 October 2016 11:19:47 UTC+5:30, Babu Naveen wrote:

--
You received this message because you are subscribed to the Google Groups "opennetworklinux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to opennetworklin...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Babu Naveen

October 5, 2016 at 10:49 PM

[Babu Naveen]

Hi Steve,

there was one more issue with ONL bootup logs which i have sent in separate mail 

link: https://groups.google.com/forum/#!topic/opennetworklinux/fCq6DXCDpRI

w.r.t OFDPA issue:

I manually inserted ofdpa kernel modules and installed debian packages

logs: 

root@localhost:~# insmod /mnt/flash2/ofdpa_modules/linux-kernel-bde.ko

root@localhost:~# insmod /mnt/flash2/ofdpa_modules/linux-user-bde.ko

root@localhost:~# dpkg -i --force-overwrite /mnt/flash2/Oct10/ofdpa-redstone-xp-2.0.4.0-ONL-amd64.deb

Selecting previously unselected package ofdpa-redstone-xp.

(Reading database ... 14868 files and directories currently installed.)

Preparing to unpack .../ofdpa-redstone-xp-2.0.4.0-ONL-amd64.deb ...

Unpacking ofdpa-redstone-xp (2.0.4.0) ...

Setting up ofdpa-redstone-xp (2.0.4.0) ...

Processing triggers for libc-bin (2.19-18+deb8u4) ...

root@localhost:~#

root@localhost:~# lsmod

Module                  Size  Used by

linux_user_bde         16656  0

linux_kernel_bde       38682  1 linux_user_bde

root@localhost:~#

root@localhost:~# cat /etc/onl/platform

x86-64-cel-redstone-xp-r0

but when I searched for the OFDPA services, i could not find any logs as below

root@localhost:~# service ofdpa restart

ofdpa: unrecognized service

root@localhost:~# service ofdpa start

ofdpa: unrecognized service

root@localhost:~# service ofdpa stop

ofdpa: unrecognized service

root@localhost:~# service --status-all

 [ - ]  bootlogs

 [ - ]  bootmisc.sh

 [ - ]  checkfs.sh

 [ - ]  checkroot-bootclean.sh

 [ - ]  checkroot.sh

 [ + ]  faultd

 [ - ]  hostname.sh

 [ ? ]  hwclock.sh

 [ ? ]  kexec

 [ ? ]  kexec-load

 [ - ]  killprocs

 [ ? ]  kmod

 [ - ]  motd

 [ - ]  mountall-bootclean.sh

 [ - ]  mountall.sh

 [ - ]  mountdevsubfs.sh

 [ - ]  mountkernfs.sh

 [ - ]  mountnfs-bootclean.sh

 [ - ]  mountnfs.sh

 [ + ]  netplug

 [ ? ]  networking

 [ - ]  nfs-common

 [ - ]  ntp

 [ - ]  onlp-snmpd

 [ - ]  onlpd

 [ - ]  openbsd-inetd

 [ - ]  procps

 [ - ]  rc.local

 [ + ]  resolvconf

 [ - ]  rmnologin

 [ - ]  rpcbind

 [ + ]  rsyslog

 [ - ]  sendsigs

 [ - ]  smartmontools

 [ + ]  snmpd

 [ + ]  ssh

 [ - ]  sudo

 [ + ]  udev

 [ ? ]  udev-finish

 [ - ]  umountfs

 [ - ]  umountnfs.sh

 [ - ]  umountroot

 [ - ]  urandom

 [ + ]  watchdog

 [ - ]  wd_keepalive

root@localhost:~#

if OFDPA module is inserted then its services should have been started ? is there any other command to start it?

and I was referring to verify the OFDPA on celestica switch but I needed 

 Indigo OpenFlow Agent which I could not find? do we need to install separately? 

Run Indigo OpenFlow Agent to connect the switch to controller(s)

# brcm-indigo-ofdpa-ofagent Command is not working on ONL

above details are as per the link: 

https://wiki.onosproject.org/display/ONOS/%5BArchived%5D+Hardware+Switch+Installation+Guide#id-[Archived]HardwareSwitchInstallationGuide-InstallOF-DPApackage

[Steven Noble]

Hi Babu,

Indigo is combined with other code and should be /broadcom/ofdpa/ofagentapp

root@localhost:/broadcom/ofdpa# ./launcher ofagentapp
linux-kernel-bde (16294): Selected payload size may not be supported by all PCIe bridges by default. (256)
ofagentapp[16304]: Start command = ofagentapp
Apr 10 15:46:21.485 ofagent: MSG: version 0.0.0.0 -- Built on Wed Oct 5 2016 at 20:22:43 UTC
OF Datapath ID: 0x000000000000DA7A
Initializing the system.
WARNING: bcm esw command MemWatch not alphabetized
DMA pool size: 16777216
PCI unit 0: Dev 0xb854, Rev 0x03, Chip BCM56854_A2, Driver BCM56850_A0

Found board: Celestica Redstone-XP
SOC unit 0 attached to PCI device BCM56854_A2
rc: unit 0 device BCM56854_A2
rc: Port modes initialized
rc: common SDK init complete

Babu Naveen

October 7, 2016 at 2:41 AM

Steven Noble

October 6, 2016 at 9:16 AM

[Babu Naveen]

Hi Steve,

Thanks for the inputs, I am able to get the Agent running - will try to connect with ONOS fabric configuration and test it.

also I am planning to test the H/w for OpenFlow, Segment Routing protocol from 

https://wiki.opencord.org/display/CORD/Hardware+Conformance+OpenFlow+Test

will update you for further improvements, if you see any conflicts here? please feel free to update me 

Logs:

root@localhost:/broadcom/ofdpa# ./launcher ofagentapp

ofagentapp[17848]: Start command = ofagentapp

Jul 24 17:10:21.074 ofagent: MSG: version 0.0.0.0 -- Built on Wed Oct 5 2016 at 20:22:43 UTC

OF Datapath ID: 0x000000000000DA7A

Initializing the system.

WARNING: bcm esw command MemWatch not alphabetized

DMA pool size: 16777216

PCI unit 0: Dev 0xb854, Rev 0x03, Chip BCM56854_A2, Driver BCM56850_A0

Found board: Celestica Redstone-XP

SOC unit 0 attached to PCI device BCM56854_A2

rc: unit 0 device BCM56854_A2

rc: Port modes initialized

rc: common SDK init complete

Starting rpcsrvTask.

Jul 24 17:10:35.030 socketmanager: INFO: Initializing socket manager

Jul 24 17:10:35.032 ofstatemanager: INFO: Registered gentable "test" with table id 0

Jul 24 17:10:35.032 socketmanager: INFO: Enabling OF socket mgr

Jul 24 17:10:35.032 ofconnectionmanager: INFO: Enabling OF connection mgr

Jul 24 17:10:35.032 ofstatemanager: INFO: Enabling OF state mgr

Thanks,

Babu

[Babu Naveen]

Hi Steve,

will the GIT path : https://github.com/opencord/fabric-oftest

will work for Celestica switch, since I am finding difficult to verify the Testing as per "hardware conformance openflow test"

and alos in the Readme mentioned that "At this moment the switches supported are Accton switches. For more information abot that check the wiki page at wiki.opencord.org"

any inputs on this would help us.

Thanks,

Babu

--

-- ಇಂತಿ ನಿಮ್ಮ ಪ್ರೀತಿಯ 

   ಬಾಬು ನವೀನ್ ವೆಂಕಟೇಶಪ್ಪ

   +೯೧-೯೮೮೬೧೭೦೩೧೭

[Babu Naveen]

Hi Steve,

I was trying with OF test provided by OpenCord assuming that these are the same OF test cases required for Celestica Redstone switches also.

https://wiki.opencord.org/display/CORD/Hardware+Conformance+OpenFlow+Test

 

OF agent on switch able to do Handshake with the controller but following error has been thrown  : controller machine IP: 172.27.30.193 on the port 6653

 

root@localhost:/broadcom/ofdpa# ./launcher ofagentapp -t 172.27.30.193:6653

linux-kernel-bde (1060): Selected payload size may not be supported by all PCIe bridges by default. (256)

ofagentapp[1070]: Start command = ofagentapp -t 172.27.30.193:6653

Aug 04 11:13:51.945 ofagent: MSG: version 0.0.0.0 -- Built on Wed Oct 5 2016 at 20:22:43 UTC

OF Datapath ID: 0x000000000000DA7A

Initializing the system.

WARNING: bcm esw command MemWatch not alphabetized

DMA pool size: 16777216

PCI unit 0: Dev 0xb854, Rev 0x03, Chip BCM56854_A2, Driver BCM56850_A0

 

Found board: Celestica Redstone-XP

SOC unit 0 attached to PCI device BCM56854_A2

rc: unit 0 device BCM56854_A2

rc: Port modes initialized

rc: common SDK init complete

Starting rpcsrvTask.

Aug 04 11:14:06.013 socketmanager: INFO: Initializing socket manager

Aug 04 11:14:06.015 ofstatemanager: INFO: Registered gentable "test" with table id 0

Aug 04 11:14:06.015 socketmanager: INFO: Enabling OF socket mgr

Aug 04 11:14:06.015 ofconnectionmanager: INFO: Enabling OF connection mgr

Aug 04 11:14:06.015 ofstatemanager: INFO: Enabling OF state mgr

Aug 04 11:14:06.015 ofagent: MSG: Adding controller 172.27.30.193:6653

Aug 04 11:14:06.015 ofconnectionmanager: INFO: Added remote connection: 172.27.30.193:6653

Aug 04 11:14:06.017 ofconnectionmanager: INFO: cxn 172.27.30.193:6653: Could not connect in 2 tries: Connection refused

Aug 04 11:14:06.029 ofconnectionmanager: INFO: cxn 172.27.30.193:6653: Could not connect in 4 tries: Connection refused

Aug 04 11:14:06.270 ofconnectionmanager: INFO: cxn 172.27.30.193:6653: Could not connect in 8 tries: Connection refused

Aug 04 11:14:13.045 ofconnectionmanager: INFO: cxn 172.27.30.193:6653: Could not connect in 16 tries: Connection refused

Aug 04 11:14:29.063 ofconnectionmanager: INFO: cxn 172.27.30.193:6653: Could not connect in 32 tries: Connection refused

Aug 04 11:15:01.098 ofconnectionmanager: INFO: cxn 172.27.30.193:6653: Could not connect in 64 tries: Connection refused

Aug 04 11:15:05.102 ofconnectionmanager: INFO: cxn 172.27.30.193:6653: DISCONNECTED->CONNECTING

Aug 04 11:15:05.102 ofconnectionmanager: INFO: cxn 172.27.30.193:6653: CONNECTING->HANDSHAKE_COMPLETE

Aug 04 11:15:05.133 indigo_ofdpa_driver: ERROR: Error in deleting Group buckets, rv = -27

 

And from the controller side all the TCs are showing error after first TC failed.

flows.EcmpGroupMod … FAIL

flows.FloodGroupMod … ERROR

flows.L2FloodQinQ … ERROR

flows.L2McastToL2TagToTag … ERROR

….

….

 

Do you have any INPUTs on these?

 

​Thanks,

Babu​

[sachidananda sahu]

Hi Steven,

I need to build the Ofdpa 3.0 for celstica box, i followed the link mentioned here 

http://opennetlinux.org/binaries/ofdpa  but ofdpa 3.0 deb package not found.

Can you help me in building this package or provide some info to get started with it.

[Steven Noble]

Hi, 

What Celestica box is it? 

We would need to ask Celestica to build ofdpa as I do not have the necessary configuration files for their boxes. 

To unsubscribe from this group and stop receiving emails from it, send an email to opennetworklinux+unsubscribe@googlegroups.com.

[sachidananda sahu]

Hello Steven,

Thanks for your quick reply, it's same RedstoneXP D2060 Celestica switch for which you had helped to build of-dpa 2.0. Now we would like to build for of-dpa 3.0 version and put it in Celestica switch for CORD 2.0.

[Steven Noble]

Hi,

What kernel is on the box you need this for? I located the celstica files.

sachidananda sahu

January 31, 2017 at 8:29 AM

Hello Steven,

Thanks for your quick reply, it's same RedstoneXP D2060 Celestica switch for which you had helped to build of-dpa 2.0. Now we would like to build for of-dpa 3.0 version and put it in Celestica switch for CORD 2.0.

sachidananda sahu

January 31, 2017 at 2:36 AM

Hi Steven,

I need to build the Ofdpa 3.0 for celstica box, i followed the link mentioned here 

http://opennetlinux.org/binaries/ofdpa  but ofdpa 3.0 deb package not found.

Can you help me in building this package or provide some info to get started with it.

On Thursday, 6 October 2016 02:01:02 UTC+5:30, Steven Noble wrote:

--
You received this message because you are subscribed to the Google Groups "opennetworklinux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to opennetworklin...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Steven Noble

October 5, 2016 at 1:30 PM

[sachidananda sahu]

Hello Steven, 

It will be onl amd64 only.

On Jan 31, 2017 10:29 PM, "Steven Noble" <steven...@bigswitch.com> wrote:

Hi,

What kernel is on the box you need this for? I located the celstica files.

sachidananda sahu

January 31, 2017 at 8:29 AM

Hello Steven,

Thanks for your quick reply, it's same RedstoneXP D2060 Celestica switch for which you had helped to build of-dpa 2.0. Now we would like to build for of-dpa 3.0 version and put it in Celestica switch for CORD 2.0.

sachidananda sahu

January 31, 2017 at 2:36 AM

Hi Steven,

I need to build the Ofdpa 3.0 for celstica box, i followed the link mentioned here 

http://opennetlinux.org/binaries/ofdpa  but ofdpa 3.0 deb package not found.

Can you help me in building this package or provide some info to get started with it.

On Thursday, 6 October 2016 02:01:02 UTC+5:30, Steven Noble wrote:

--
You received this message because you are subscribed to the Google Groups "opennetworklinux" group.

To unsubscribe from this group and stop receiving emails from it, send an email to opennetworklinux+unsubscribe@googlegroups.com.

To unsubscribe from this group and stop receiving emails from it, send an email to opennetworklinux+unsubscribe@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

[sachidananda sahu]

Hello Steven, 

Would you like to know any other info regarding the switch ?

[Steven Noble]

Hi, 

I have enough information, just struggling to compile the latest ofdpa on the 3.16 kernel. OF-DPA does not like post uefi kernels. I hope to have something tomorrow. 

[sachidananda sahu]

Okay Steven, 

Thanks a lot for your effort.

Hello Steven, 

To unsubscribe from this group and stop receiving emails from it, send an email to opennetworklin...@googlegroups.com.

To unsubscribe from this group and stop receiving emails from it, send an email to opennetworklin...@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

[sachidananda sahu]

Hi Steven,

Any update on building the ofdpa 3.0 ? 

[sachidananda sahu]

Hello Steven,

Is there any major problem while compiling ofdpa 3.0 ?

--

Regards,
Sachidananda Sahu
+91-9035265767

[Steven Noble]

Hi Sachidananda,

Compiling OF-DPA 3.0 against a kernel with UAPI split (post 3.7) is not working and we are using the 3.16 kernel for all x86 systems now.  I am able to compile OpenNSL for the same box against 3.16 so I suspect it is something in how OF-DPA is designed.  I have someone looking into it with me but I am unsure when we will have a solution.

sachidananda sahu

February 5, 2017 at 10:33 PM

Hello Steven,

Is there any major problem while compiling ofdpa 3.0 ?

--

Regards,
Sachidananda Sahu
+91-9035265767

--
You received this message because you are subscribed to the Google Groups "opennetworklinux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to opennetworklin...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

sachidananda sahu

February 2, 2017 at 10:40 PM

Hi Steven,

Any update on building the ofdpa 3.0 ? 

On Wednesday, 1 February 2017 11:40:21 UTC+5:30, sachidananda sahu wrote:

--
You received this message because you are subscribed to the Google Groups "opennetworklinux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to opennetworklin...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

sachidananda sahu

January 31, 2017 at 10:10 PM

Okay Steven, 

Thanks a lot for your effort.

On Wednesday, 1 February 2017 11:30:35 UTC+5:30, Steven Noble wrote:

--
You received this message because you are subscribed to the Google Groups "opennetworklinux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to opennetworklin...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Steven Noble

January 31, 2017 at 10:00 PM

Hi, 

I have enough information, just struggling to compile the latest ofdpa on the 3.16 kernel. OF-DPA does not like post uefi kernels. I hope to have something tomorrow. 

sachidananda sahu

January 31, 2017 at 9:55 PM

[sachidananda sahu]

Thanks a lot Steven for your effort, i am just summarizing your statement and want to know about some clarification regarding this.

> I just collected info about openNSL, is openNSL is like OFDPA for controlling broadcom switch ?

> As you have last time build OFDPA2.0 for ONL having kernel version 3.2.6 (Which is currently in our hardware), so OFDPA2.0 works fine with kernel 3.2 version.

> But any way with OFDPA 3.0 is not working with kernel version 3.7 as you informed so you have all the boxes now with 3.16 kernel.

> As you have mentioned explicitly openNSL is compiled successfully with ONL with kernel version 3.16, Can you conform about OFDPA 3.0 is not compiling with kernel version 3.16. As you mean to say OFDPA3.0 design change  may creating problem wit kernel 3.16 ?

Is my understanding is correct ?

On Wed, Feb 8, 2017 at 6:15 AM, Steven Noble <steven...@bigswitch.com> wrote:

Hi Sachidananda,

Compiling OF-DPA 3.0 against a kernel with UAPI split (post 3.7) is not working and we are using the 3.16 kernel for all x86 systems now.  I am able to compile OpenNSL for the same box against 3.16 so I suspect it is something in how OF-DPA is designed.  I have someone looking into it with me but I am unsure when we will have a solution.

sachidananda sahu

February 5, 2017 at 10:33 PM

Hello Steven,

Is there any major problem while compiling ofdpa 3.0 ?

--

Regards,
Sachidananda Sahu
+91-9035265767

--
You received this message because you are subscribed to the Google Groups "opennetworklinux" group.

To unsubscribe from this group and stop receiving emails from it, send an email to opennetworklinux+unsubscribe@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

sachidananda sahu

February 2, 2017 at 10:40 PM

Hi Steven,

Any update on building the ofdpa 3.0 ? 

On Wednesday, 1 February 2017 11:40:21 UTC+5:30, sachidananda sahu wrote:

--
You received this message because you are subscribed to the Google Groups "opennetworklinux" group.

To unsubscribe from this group and stop receiving emails from it, send an email to opennetworklinux+unsubscribe@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

sachidananda sahu

January 31, 2017 at 10:10 PM

Okay Steven, 

Thanks a lot for your effort.

On Wednesday, 1 February 2017 11:30:35 UTC+5:30, Steven Noble wrote:

--
You received this message because you are subscribed to the Google Groups "opennetworklinux" group.

To unsubscribe from this group and stop receiving emails from it, send an email to opennetworklinux+unsubscribe@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

Steven Noble

January 31, 2017 at 10:00 PM

Hi, 

I have enough information, just struggling to compile the latest ofdpa on the 3.16 kernel. OF-DPA does not like post uefi kernels. I hope to have something tomorrow. 

sachidananda sahu

January 31, 2017 at 9:55 PM

Hello Steven, 

Would you like to know any other info regarding the switch ?

On Tuesday, 31 January 2017 23:05:49 UTC+5:30, sachidananda sahu wrote:

[sachidananda sahu]

Hello Steven,

Any further update on then OFDPA3.0 installation ?

[jo...@treg.se]

Hello,

Is there any success on compiling a newer ofdpa package for this switch?