Good couple: openhab2 & Raspberry PI 2

[Stefan Andres]

Hi all,

I have got a Raspberry PI 2.
The first what I did: Install openhab 2. ;-)

My expeirence: 

1. Installing the image: 2015-02-16-raspbian-wheezy.img and set up the system.
   
2. openhab2 fetch from upstream at 25.2.2015 + PaperUI -> build
3. copy to Raspberry

My first joy: openhab run directly. My MAX! cube has been discovered: Kai and his team has made a great job - thanks,

The startup of the full runtime installation need 51 seconds;  the minimal-runtime needs 38 seconds.
Memory is more than enough. full needs: 109M; min 88M
Until the startup the cpu was all time more the 50% idle.

I think, this is for a alpha release good values.

My result is: Raspberry PI 2 is a good hardware for openhab2 - I going to bring up my "smart home" on openhab2 and raspberry PI 2.

I hope this information is helpfull.

Regards
Stefan

[JohnLee channel]

Dear Stefan,

There are not many people who have done this so it is hard for me to do.

Could you explain more about this step?:

  2. openhab2 fetch from upstream at 25.2.2015 + PaperUI -> build

I'd appreciate it!

Thanks, John.