Groups
Sign in
Groups
openhab2
Conversations
Labels
About
Send feedback
Help
openhab2
Contact owners and managers
1–30 of 226
This is an old discussion group for openHAB 2.
It has been replaced by the openHAB Community Forum at
https://community.openhab.org/
.
Please ask all questions there now - this group is only kept for reference.
Mark all as read
Report group
0 selected
karsten.k...@gmail.com
, …
Hans-Jörg Merk
40
9/15/15
WeMo in OPenhab 2
Hi Karsten, The latest firmware is working with my development system, so shure, give it a try. Best
unread,
WeMo in OPenhab 2
Hi Karsten, The latest firmware is working with my development system, so shure, give it a try. Best
9/15/15
Dominic Lerbs
,
Kai Kreuzer
9
9/15/15
Patience needed when adding thing for astro binding in PaperUI
Hi Dominic, I will try again today/tomorrow with the latest snapshot build. No need, this then looks
unread,
Patience needed when adding thing for astro binding in PaperUI
Hi Dominic, I will try again today/tomorrow with the latest snapshot build. No need, this then looks
9/15/15
kalex lexka
,
Kai Kreuzer
2
9/14/15
Hue Bridge not found
I'm afraid I am lacking some context here. What are you trying to do? Do changes on the Hue
unread,
Hue Bridge not found
I'm afraid I am lacking some context here. What are you trying to do? Do changes on the Hue
9/14/15
Alexey Ivantsov
,
Kai Kreuzer
2
9/14/15
Can not see ZigBee devices in "Control" tab
Hi Alexey, I order to have devices appear on the Control page of the Paper UI, you have to assign
unread,
Can not see ZigBee devices in "Control" tab
Hi Alexey, I order to have devices appear on the Control page of the Paper UI, you have to assign
9/14/15
Alexey Ivantsov
,
Kai Kreuzer
2
9/10/15
Can not build OH2 from https://github.com/cdjackson/openhab2.git
You seem to have hit a very bad timing here - I was just updating the target platform - it should now
unread,
Can not build OH2 from https://github.com/cdjackson/openhab2.git
You seem to have hit a very bad timing here - I was just updating the target platform - it should now
9/10/15
Michael Dave
, …
Jim Howard
7
9/3/15
Q&A
Receiving multiple events in persistence service.
Going to take it over here: https://community.openhab.org/t/multiple-identical-updates-from-items-
unread,
Q&A
Receiving multiple events in persistence service.
Going to take it over here: https://community.openhab.org/t/multiple-identical-updates-from-items-
9/3/15
Stefan Andres
,
JohnLee channel
2
8/27/15
Good couple: openhab2 & Raspberry PI 2
Dear Stefan, There are not many people who have done this so it is hard for me to do. Could you
unread,
discussions
examples
Good couple: openhab2 & Raspberry PI 2
Dear Stefan, There are not many people who have done this so it is hard for me to do. Could you
8/27/15
tom...@gmail.com
8/22/15
zwave and new site questions
Hello all First of all I want to thanks all involved in Openhab project I installed Openhab 2 on RP 2
unread,
zwave and new site questions
Hello all First of all I want to thanks all involved in Openhab project I installed Openhab 2 on RP 2
8/22/15
Kai Kreuzer
,
Greg EVA
2
8/17/15
Announcement
New openHAB Discussion Forum
Nice work guys! It looks great. I'm looking forward to learning and using the new system. Cheers,
unread,
Announcement
New openHAB Discussion Forum
Nice work guys! It looks great. I'm looking forward to learning and using the new system. Cheers,
8/17/15
Matthew Herren
8/13/15
Homematic Binding for OpenHAB 2
Hi Everyone, I've posted this is in far too many locations, I know, and I apologize, it's
unread,
Homematic Binding for OpenHAB 2
Hi Everyone, I've posted this is in far too many locations, I know, and I apologize, it's
8/13/15
Robert Bausdorf
, …
Dominic Lerbs
6
8/11/15
The future of AVM (fritzbox, fritzaha) bindings
Hello Robert, any update in this? (I am coming from the discussion here: https://github.com/openhab/
unread,
binding
discussions
The future of AVM (fritzbox, fritzaha) bindings
Hello Robert, any update in this? (I am coming from the discussion here: https://github.com/openhab/
8/11/15
JD Steffen
,
Kevin Gottsman
6
8/10/15
Honeywell Wifi Thermostat Binding for OpenHAB2
Kevin, I made some simple updates to the binding. Here's what I accomplished: - Password field is
unread,
Honeywell Wifi Thermostat Binding for OpenHAB2
Kevin, I made some simple updates to the binding. Here's what I accomplished: - Password field is
8/10/15
smartp...@gmail.com
,
Kai Kreuzer
7
8/10/15
New 1.7 binding not working in OH2
What's your analysis of my problem ? I have no clue. What I see is that in openHAB 1, the items
unread,
New 1.7 binding not working in OH2
What's your analysis of my problem ? I have no clue. What I see is that in openHAB 1, the items
8/10/15
Karel Goderis
,
Kai Kreuzer
2
8/10/15
ThingManager time-out
This log should actually be only a warning, not an error. I just created a PR to fix this: https://
unread,
ThingManager time-out
This log should actually be only a warning, not an error. I just created a PR to fix this: https://
8/10/15
Jarle B. Hjortland
,
Kai Kreuzer
3
8/9/15
Q&A
Configuration parameters not updated
Yes, it works when I install it to my test openhab, but when i run from eclipse I can't see the
unread,
Q&A
Configuration parameters not updated
Yes, it works when I install it to my test openhab, but when i run from eclipse I can't see the
8/9/15
Joep Admiraal
,
Kai Kreuzer
9
8/9/15
How to import paper ui?
I got it working now. Since I started a new workspace I did not have openhab in my workspace. After
unread,
How to import paper ui?
I got it working now. Since I started a new workspace I did not have openhab in my workspace. After
8/9/15
Karel Goderis
,
Kai Kreuzer
10
8/9/15
classic UI, widget order inverse
No, no LIFX. Just had a glimpse, after 24h, I now have 1700 live threads (up from 250 ish). The
unread,
classic UI, widget order inverse
No, no LIFX. Just had a glimpse, after 24h, I now have 1700 live threads (up from 250 ish). The
8/9/15
ashish nagar
, …
Jayaraj Esvar
34
8/7/15
Alljoyn Binding for OH 2?
Hi, I have done that binding for alljoyn with Control Panel Interface based devices with some hints
unread,
binding
Alljoyn Binding for OH 2?
Hi, I have done that binding for alljoyn with Control Panel Interface based devices with some hints
8/7/15
JohannesR
8/7/15
Update one channel from another
Hi i am sorry for the many questions, but i am a newbie and I don't really get everything well ;)
unread,
Update one channel from another
Hi i am sorry for the many questions, but i am a newbie and I don't really get everything well ;)
8/7/15
Georgi Todorov
,
Kai Kreuzer
2
8/7/15
Manually defining a Thing for items updated via REST API
Hi Georgi, You do not need Things here at all, simply use items, which you can then update through
unread,
Manually defining a Thing for items updated via REST API
Hi Georgi, You do not need Things here at all, simply use items, which you can then update through
8/7/15
Kai Kreuzer
8/7/15
Re: [openhab2] How can I add controls?
If you have defined a switch channel in your thing type, you should also see a control on the control
unread,
Re: [openhab2] How can I add controls?
If you have defined a switch channel in your thing type, you should also see a control on the control
8/7/15
JohannesR
,
Kai Kreuzer
3
8/6/15
Method Call in handleCommand
I am so sorry, the problem were the breakpoints ;) after i disabled them there was no problem at all
unread,
Method Call in handleCommand
I am so sorry, the problem were the breakpoints ;) after i disabled them there was no problem at all
8/6/15
Jarle B. Hjortland
,
Karel Goderis
3
8/5/15
Access BridgeHandler from DeviceHandler
Thanks, works perfectly tirsdag 4. august 2015 18.25.45 UTC+2 skrev Jarle B. Hjortland følgende: When
unread,
Access BridgeHandler from DeviceHandler
Thanks, works perfectly tirsdag 4. august 2015 18.25.45 UTC+2 skrev Jarle B. Hjortland følgende: When
8/5/15
JohannesR
,
Kai Kreuzer
5
8/5/15
Use configurations in the HandlerFactory???
Thank You Kai for the Help, i got it now ;) The HandlerFactory was the wrong place for what I wanted
unread,
Use configurations in the HandlerFactory???
Thank You Kai for the Help, i got it now ;) The HandlerFactory was the wrong place for what I wanted
8/5/15
Thomas Goldschmidt
,
Kai Kreuzer
2
8/3/15
Getting started with enocean binding and OpenHAB2
Hi Thomas, Thanks for asking here before starting any developments :-) I alreasy had a look at the
unread,
binding
Getting started with enocean binding and OpenHAB2
Hi Thomas, Thanks for asking here before starting any developments :-) I alreasy had a look at the
8/3/15
Jim Howard
,
Kai Kreuzer
2
8/3/15
re-open an issue?
Surely, I have re-opened it for you! Am 03 Aug 2015 um 06:26 schrieb Jim Howard <jh.xsnrg@gmail.
unread,
re-open an issue?
Surely, I have re-opened it for you! Am 03 Aug 2015 um 06:26 schrieb Jim Howard <jh.xsnrg@gmail.
8/3/15
lolodomo
,
Kai Kreuzer
2
8/2/15
Classic ui URL to be updated in the documentation
Thanks, I fixed it! Am 01 Aug 2015 um 23:29 schrieb lolodomo <smartp...@gmail.com>: The
unread,
Classic ui URL to be updated in the documentation
Thanks, I fixed it! Am 01 Aug 2015 um 23:29 schrieb lolodomo <smartp...@gmail.com>: The
8/2/15
JD Steffen
,
Kai Kreuzer
2
7/31/15
thing-types.xml and <options> sections
Hi JD, I think the option list in the state description is currently not yet (well) supported in the
unread,
thing-types.xml and <options> sections
Hi JD, I think the option list in the state description is currently not yet (well) supported in the
7/31/15
Steve
, …
Kai Kreuzer
22
7/31/15
Charts? (Image)
I think if the variable imagesToRefreshOnPage is changed to imageRefesh it will work. I just tried
unread,
discussions
Charts? (Image)
I think if the variable imagesToRefreshOnPage is changed to imageRefesh it will work. I just tried
7/31/15
Tim Oberföll
,
Kai Kreuzer
7
7/31/15
Q&A
Searching for a getSate() function
Hey Kai, thank you for your response! Greetings, Tim Am Donnerstag, 30. Juli 2015 16:01:11 UTC+2
unread,
Q&A
Searching for a getSate() function
Hey Kai, thank you for your response! Greetings, Tim Am Donnerstag, 30. Juli 2015 16:01:11 UTC+2
7/31/15