OpenFOAM 1.6 を　ubuntu9.1 か　openSUSe11.2 にインストールしたいのですが

379 views
Skip to first unread message

3gkl

unread,
Nov 24, 2009, 10:39:40 AM11/24/09
to OpenFOAM
linuxの超初心者です。　CFDに関しては多少の経験があります。

VM　wareで　OpenFOAM1.6を使用したいのですが、　Allwmake が走りません。　端末が一瞬だけ立ち上がって消えてしまうので、
何が起きているのかもわかりません。　様々なサイトを拝見して、　. $HOME/OpenFOAM/OpenFOAM-1.6/etc/
bashrc は記述しましたが、　反応は変化しません。　linuxはopenSUSE11.2 と　ubuntu 9.10 ( 9.04 ) と
用意しました。　エラーログの探し方もわからない状態です。　非常に恥ずかしいですが、是非ご指導ください。

E.Mogura

unread,
Nov 24, 2009, 4:14:50 PM11/24/09
to OpenFOAM
文面からだと、Allwmakeをダブルクリックしてるように見受けられますが。。。

端末を開いて、

. $HOME/OpenFOAM/OpenFOAM-1.6/etc/

を実行する。これだけでは見かけ上は何も変化しないが

src

と打ち込むと、ソースファイルのあるディレクトリ（$HOME/OpenFOAM/OpenFOAM-1.6/src）に移動するはず。そこで、

　./Allwmake

と打ち込みます。

OS（openSUSE11.2 や　ubuntu 9.10 ）が素のままだと、何かとエラーメッセージが出てくるかと思います。

ubuntu 9.10 の場合の、その他の必要モジュールは、
http://mogura7.zenno.info/~et/xoops/modules/wordpress/index.php?p=246
のあたりの記事が参考になると思います

3gkl

unread,
Nov 24, 2009, 6:26:26 PM11/24/09
to OpenFOAM
E.Mogura 様

ご指導感謝いたします。早速試してみました。　今度はエラーメッセージがたくさん出てきます。　これを一つづつ解決しなくてはいけないのでしょうか？
重ねがさねとなりますが、ご指導をお願いいたします。

+ wmakePrintBuild -check
./Allwmake: 1: wmakePrintBuild: not found
+ /bin/rm -f OpenFOAM/Make//global.?
+ wmakeLnInclude OpenFOAM
./Allwmake: 1: wmakeLnInclude: not found
+ wmakeLnInclude OSspecific/
./Allwmake: 1: wmakeLnInclude: not found
+ Pstream/Allwmake
+ wmake libso dummy
Pstream/Allwmake: 1: wmake: not found
+ wmake libo OSspecific/
./Allwmake: 1: wmake: not found
+ wmake libso OpenFOAM
./Allwmake: 1: wmake: not found
+ wmake libso lagrangian/basic
./Allwmake: 1: wmake: not found
+ wmake libso triSurface
./Allwmake: 1: wmake: not found
+ wmake libso edgeMesh
./Allwmake: 1: wmake: not found
+ wmake libso surfMesh
./Allwmake: 1: wmake: not found
+ decompositionMethods/Allwmake
+ wmake libso decompositionMethods
decompositionMethods/Allwmake: 1: wmake: not found
+ [ -d ]
+ wmake libso meshTools
./Allwmake: 1: wmake: not found
+ wmake libso finiteVolume
./Allwmake: 1: wmake: not found
+ wmake libso sampling
./Allwmake: 1: wmake: not found
+ wmake libso dynamicMesh
./Allwmake: 1: wmake: not found
+ wmake libso dynamicFvMesh
./Allwmake: 1: wmake: not found
+ wmake libso topoChangerFvMesh
./Allwmake: 1: wmake: not found
+ wmake libso fvMotionSolver
./Allwmake: 1: wmake: not found
+ wmake libso engine
./Allwmake: 1: wmake: not found
+ wmake libso ODE
./Allwmake: 1: wmake: not found
+ wmake libso randomProcesses
./Allwmake: 1: wmake: not found
+ thermophysicalModels/Allwmake
+ wmake libso specie
thermophysicalModels/Allwmake: 1: wmake: not found
+ wmake libso thermophysicalFunctions
thermophysicalModels/Allwmake: 1: wmake: not found
+ wmake libso liquids
thermophysicalModels/Allwmake: 1: wmake: not found
+ wmake libso liquidMixture
thermophysicalModels/Allwmake: 1: wmake: not found
+ wmake libso solids
thermophysicalModels/Allwmake: 1: wmake: not found
+ wmake libso solidMixture
thermophysicalModels/Allwmake: 1: wmake: not found
+ wmake libso basic
thermophysicalModels/Allwmake: 1: wmake: not found
+ wmake libso reactionThermo
thermophysicalModels/Allwmake: 1: wmake: not found
+ wmake libso laminarFlameSpeed
thermophysicalModels/Allwmake: 1: wmake: not found
+ wmake libso chemistryModel
thermophysicalModels/Allwmake: 1: wmake: not found
+ wmake libso pdfs
thermophysicalModels/Allwmake: 1: wmake: not found
+ wmake libso radiation
thermophysicalModels/Allwmake: 1: wmake: not found
+ wmake libso barotropicCompressibilityModel
thermophysicalModels/Allwmake: 1: wmake: not found
+ transportModels/Allwmake
+ wmake libso incompressible
transportModels/Allwmake: 1: wmake: not found
+ wmake libso interfaceProperties
transportModels/Allwmake: 1: wmake: not found
+ turbulenceModels/Allwmake
+ LES/Allwmake
+ wmakeLnInclude ../incompressible/LES
LES/Allwmake: 1: wmakeLnInclude: not found
+ wmake libso LESfilters
LES/Allwmake: 1: wmake: not found
+ wmake libso LESdeltas
LES/Allwmake: 1: wmake: not found
+ incompressible/Allwmake
+ wmake libso turbulenceModel
incompressible/Allwmake: 1: wmake: not found
+ wmake libso RAS
incompressible/Allwmake: 1: wmake: not found
+ wmake libso LES
incompressible/Allwmake: 1: wmake: not found
+ compressible/Allwmake
+ wmake libso turbulenceModel
compressible/Allwmake: 1: wmake: not found
+ wmake libso RAS
compressible/Allwmake: 1: wmake: not found
+ wmake libso LES
compressible/Allwmake: 1: wmake: not found
+ lagrangian/Allwmake
+ wmake libso basic
lagrangian/Allwmake: 1: wmake: not found
+ wmake libso solidParticle
lagrangian/Allwmake: 1: wmake: not found
+ wmake libso intermediate
lagrangian/Allwmake: 1: wmake: not found
+ wmake libso dieselSpray
lagrangian/Allwmake: 1: wmake: not found
+ wmake libso dsmc
lagrangian/Allwmake: 1: wmake: not found
+ wmake libso coalCombustion
lagrangian/Allwmake: 1: wmake: not found
+ molecularDynamics/Allwmake
+ wmake libso potential
molecularDynamics/Allwmake: 1: wmake: not found
+ wmake libso molecularMeasurements
molecularDynamics/Allwmake: 1: wmake: not found
+ wmake libso molecule
molecularDynamics/Allwmake: 1: wmake: not found
+ postProcessing/Allwmake
+ wmake libo postCalc
postProcessing/Allwmake: 1: wmake: not found
+ wmake libso foamCalcFunctions
postProcessing/Allwmake: 1: wmake: not found
+ functionObjects/Allwmake
+ wmake libso field
functionObjects/Allwmake: 1: wmake: not found
+ wmake libso forces
functionObjects/Allwmake: 1: wmake: not found
+ wmake libso IO
functionObjects/Allwmake: 1: wmake: not found
+ wmake libso utilities
functionObjects/Allwmake: 1: wmake: not found
+ wmake libso systemCall
functionObjects/Allwmake: 1: wmake: not found
+ conversion/Allwmake
+ wmake libso
conversion/Allwmake: 1: wmake: not found
+ wmake libso autoMesh
./Allwmake: 1: wmake: not found
+ wmake libso errorEstimation
./Allwmake: 1: wmake: not found
+ fvAgglomerationMethods/Allwmake
+ wmake libso MGridGenGamgAgglomeration
fvAgglomerationMethods/Allwmake: 1: wmake: not found
@ubuntu:~/OpenFOAM/OpenFOAM-1.6/src$
> > 用意しました。　エラーログの探し方もわからない状態です。　非常に恥ずかしいですが、是非ご指導ください。- 引用テキストを表示しない -
>
> - 引用テキストを表示 -

IMANO Masashi

unread,
Nov 24, 2009, 9:02:16 PM11/24/09
to open...@googlegroups.com

3gklさん

今野です。

> + wmakePrintBuild -check
> ./Allwmake: 1: wmakePrintBuild: not found
> + /bin/rm -f OpenFOAM/Make//global.?
> + wmakeLnInclude OpenFOAM
> ./Allwmake: 1: wmakeLnInclude: not found
> + wmakeLnInclude OSspecific/
> ./Allwmake: 1: wmakeLnInclude: not found
> + Pstream/Allwmake
> + wmake libso dummy
> Pstream/Allwmake: 1: wmake: not found

エラーの原因は、

wmakePrintBuild: not found
wmakeLnInclude: not found
wmake: not found

などと、wmake関係のコマンドがないことですので、最初にこれらがコンパイ
ルされるようにしないといけません。

READMEの"Building from Sources (Optional)"の

Now go to the top-level source directory $WM_PROJECT_DIR and execute the
top-level build script './Allwmake'. In principle this will build everything,
but if problems occur with the build order it may be necessary to update the
environment variables and re-execute 'Allwmake'.

に書いてある通り、

cd $WM_PROJECT_DIR
./Allwmake

してみてください。

なお、ログを残したい場合には、

./Allwmake > Allwmake.log 2>&1 &

としてください(シェルがbashの場合)。

注)
*"> filename" で、filenameに出力が書き込まれます。

*"2>&1" の意味は以下を参照してください。
http://x68000.q-e-d.net/~68user/unix/pickup?%A5%EA%A5%C0%A5%A4%A5%EC%A5%AF%A5%C8

*"&" はコマンドを裏(バックグラウンド)で動かす時に付けます。

さらに、ログファイルを端末上で逐次監視するには、

tail -f Allwmake.log

とします。tailコマンドはCtrl-Cで止められます。
なお、tailを止めてもAllwmakeは裏で動いています。

以上です。

At Tue, 24 Nov 2009 15:26:26 -0800 (PST),

3gkl

unread,
Nov 24, 2009, 11:02:03 PM11/24/09
to OpenFOAM
今野様

お世話になります。　早速トライしてみました。
次のメッセージが出てしまいます。

bash: ./Allmake: そのようなファイルやディレクトリーはありません。

申し訳ございませんが、再度ご指導を願います。
> http://x68000.q-e-d.net/~68user/unix/pickup?%A5%EA%A5%C0%A5%A4%A5%EC%...
> > > - 引用テキストを表示 -- 引用テキストを表示しない -
>
> - 引用テキストを表示 -

マサ

unread,
Nov 24, 2009, 11:28:54 PM11/24/09
to open...@googlegroups.com
今野です。

wが抜けてますよ！

3gkl

unread,
Nov 25, 2009, 12:00:31 AM11/25/09
to OpenFOAM
今野様

ご指摘ありがとうございます。　ｗを追加してみましたが、エラーメッセージが変わりませんでした。　こういった時には、最初から打ち直すものなのでしょ
うか？
レベルの低い質問ばかりでお恥ずかしいですが、再度ご指導願います。


On 11月25日, 午後1:28, マサ <masashi.im...@gmail.com> wrote:
> 今野です。
>
> wが抜けてますよ！
>
> ...
>
> もっと読む ≫- 引用テキストを表示しない -
>
> - 引用テキストを表示 -

IMANO Masashi

unread,
Nov 25, 2009, 12:32:18 AM11/25/09
to open...@googlegroups.com

今野です。

> こういった時には、最初から打ち直すものなのでしょうか？

もし、端末を立ち上げ直したのであれば、OpenFOAMの環境設定を行なうために、

. $HOME/OpenFOAM/OpenFOAM-1.6/etc/bash

を打ち直す必要があります。

毎回打つのが面倒であれば、READMEの

1) EITHER, if running bash or ksh (if in doubt type 'echo $SHELL'), source the
etc/bashrc file by adding the following line to the end of your
$HOME/.bashrc file:

+ . $HOME/OpenFOAM/OpenFOAM-1.6/etc/bashrc

に書いてある通り、

. $HOME/OpenFOAM/OpenFOAM-1.6/etc/bash

を $HOME/.bashrc の最後に足してから、端末を立ち上げ直してください。

上記の設定を済ましてから、

cd $WM_PROJECT_DIR
./Allwmake

を再度打ってみてください。

At Tue, 24 Nov 2009 21:00:31 -0800 (PST),

3gkl

unread,
Nov 25, 2009, 1:30:08 AM11/25/09
to OpenFOAM
今野　様

度々のご指導に深く感謝いたします。
私がbashrcに追加した内容が
. $HOME/OpenFOAM/OpenFOAM-1.6/etc/bashrc　　でした。
. $HOME/OpenFOAM/OpenFOAM-1.6/etc/bash　　　と打ち直しましたがエラーログは変わりません。

先ほどと同じくファイルやディレクトリーが無いとなります。
bashrc の内容を添付します。

#----------------------------------*-sh-
*--------------------------------------
# ========= |
# \\ / F ield | OpenFOAM: The Open Source CFD Toolbox
# \\ / O peration |
# \\ / A nd | Copyright (C) 1991-2009 OpenCFD Ltd.
# \\/ M anipulation |
#------------------------------------------------------------------------------
# License
# This file is part of OpenFOAM.
#
# OpenFOAM is free software; you can redistribute it and/or modify
it
# under the terms of the GNU General Public License as published
by the
# Free Software Foundation; either version 2 of the License, or
(at your
# option) any later version.
#
# OpenFOAM is distributed in the hope that it will be useful, but
WITHOUT
# ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
License
# for more details.
#
# You should have received a copy of the GNU General Public
License
# along with OpenFOAM; if not, write to the Free Software
Foundation,
# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
# Script
# etc/bashrc
#
# Description
# Startup file for OpenFOAM
# Sourced from ~/.profile or ~/.bashrc
# Should be usable by any POSIX-compliant shell (eg, ksh)
#
#------------------------------------------------------------------------------

export WM_PROJECT=OpenFOAM
export WM_PROJECT_VERSION=1.6

################################################################################
# USER EDITABLE PART
#
# either set $FOAM_INST_DIR before sourcing this file or set
# $foamInstall below to where OpenFOAM is installed
#
# Location of FOAM installation
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
foamInstall=$HOME/$WM_PROJECT
# foamInstall=~$WM_PROJECT
# foamInstall=/usr/local/$WM_PROJECT
# foamInstall=/opt/$WM_PROJECT
#
# END OF (NORMAL) USER EDITABLE PART
################################################################################

# note the location for later use (eg, in job scripts)
: ${FOAM_INST_DIR:=$foamInstall}; export FOAM_INST_DIR

# The old dirs to be cleaned from the various environment variables
# - remove anything under top-level directory.
# NB: the WM_PROJECT_INST_DIR might not be identical between versions
foamOldDirs="$FOAM_INST_DIR $HOME/$WM_PROJECT/$USER"
if [ "$WM_PROJECT_INST_DIR" != "$FOAM_INST_DIR" ]
then
foamOldDirs="$WM_PROJECT_INST_DIR $foamOldDirs"
fi


# Location of site/user files
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~
export WM_PROJECT_INST_DIR=$FOAM_INST_DIR
export WM_PROJECT_DIR=$WM_PROJECT_INST_DIR/$WM_PROJECT-
$WM_PROJECT_VERSION
export WM_PROJECT_USER_DIR=$HOME/$WM_PROJECT/$USER-$WM_PROJECT_VERSION


# Location of third-party software
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
export WM_THIRD_PARTY_DIR=$WM_PROJECT_INST_DIR/ThirdParty-
$WM_PROJECT_VERSION


# Operating System/Platform
# ~~~~~~~~~~~~~~~~~~~~~~~~~
# WM_OSTYPE = POSIX | ????
: ${WM_OSTYPE:=POSIX}; export WM_OSTYPE


# Compiler: set to Gcc, Gcc43 or Icc (for Intel's icc)
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
: ${WM_COMPILER:=Gcc}; export WM_COMPILER

export WM_COMPILER_ARCH=
export WM_COMPILER_LIB_ARCH=


# Compilation options (architecture, precision, optimised, debug or
profiling)
#
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# WM_ARCH_OPTION = 32 | 64
: ${WM_ARCH_OPTION:=64}; export WM_ARCH_OPTION

# WM_PRECISION_OPTION = DP | SP
: ${WM_PRECISION_OPTION:=DP}; export WM_PRECISION_OPTION

# WM_COMPILE_OPTION = Opt | Debug | Prof
: ${WM_COMPILE_OPTION:=Opt}; export WM_COMPILE_OPTION

# WM_MPLIB = | OPENMPI | MPICH | MPICH-GM | HPMPI | GAMMA | MPI |
QSMPI
: ${WM_MPLIB:=OPENMPI}; export WM_MPLIB


# Run options (floating-point signal handling and memory
initialisation)
#
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
export FOAM_SIGFPE=
# export FOAM_SETNAN=


# Detect system type and set environment variables appropriately
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
export WM_ARCH=`uname -s`

case $WM_ARCH in
Linux)
WM_ARCH=linux

# compiler specifics
case `uname -m` in
i686)
;;

x86_64)
case $WM_ARCH_OPTION in
32)
export WM_COMPILER_ARCH='-64'
export WM_CC='gcc'
export WM_CXX='g++'
export WM_CFLAGS='-m32 -fPIC'
export WM_CXXFLAGS='-m32 -fPIC'
export WM_LDFLAGS='-m32'
;;
64)
WM_ARCH=linux64
export WM_COMPILER_LIB_ARCH=64
export WM_CC='gcc'
export WM_CXX='g++'
export WM_CFLAGS='-m64 -fPIC'
export WM_CXXFLAGS='-m64 -fPIC'
export WM_LDFLAGS='-m64'
;;
*)
echo Unknown WM_ARCH_OPTION $WM_ARCH_OPTION, should be 32
or 64
;;
esac
;;

ia64)
WM_ARCH=linuxIA64
export WM_COMPILER=I64
;;

mips64)
WM_ARCH=SiCortex64
export WM_COMPILER_LIB_ARCH=64
export WM_CC='gcc'
export WM_CXX='g++'
export WM_CFLAGS='-mabi=64 -fPIC'
export WM_CXXFLAGS='-mabi=64 -fPIC'
export WM_LDFLAGS='-mabi=64 -G0'
export WM_MPLIB=MPI
;;

ppc64)
WM_ARCH=linuxPPC64
export WM_COMPILER_LIB_ARCH=64
export WM_CC='gcc'
export WM_CXX='g++'
export WM_CFLAGS='-m64 -fPIC'
export WM_CXXFLAGS='-m64 -fPIC'
export WM_LDFLAGS='-m64'
;;

*)
echo Unknown processor type `uname -m` for Linux
;;
esac
;;

SunOS)
WM_ARCH=SunOS64
export WM_COMPILER_LIB_ARCH=64
export WM_CC='gcc'
export WM_CXX='g++'
export WM_CFLAGS='-mabi=64 -fPIC'
export WM_CXXFLAGS='-mabi=64 -fPIC'
export WM_LDFLAGS='-mabi=64 -G0'
export WM_MPLIB=FJMPI
;;

*) # an unsupported operating system
cat <<USAGE

Your "$WM_ARCH" operating system is not supported by this release
of OpenFOAM. For further assistance, please contact www.OpenFOAM.org

USAGE
;;
esac


# Clean standard environment variables (PATH, LD_LIBRARY_PATH,
MANPATH)
#
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cleanProg=$WM_PROJECT_DIR/bin/foamCleanPath

#- Clean PATH
cleanEnv=`$cleanProg "$PATH" "$foamOldDirs"` && PATH="$cleanEnv"

#- Clean LD_LIBRARY_PATH
cleanEnv=`$cleanProg "$LD_LIBRARY_PATH" "$foamOldDirs"` &&
LD_LIBRARY_PATH="$cleanEnv"

#- Clean MANPATH
cleanEnv=`$cleanProg "$MANPATH" "$foamCleanDirs"` &&
MANPATH="$cleanEnv"

export PATH LD_LIBRARY_PATH MANPATH

# Source project setup files
# ~~~~~~~~~~~~~~~~~~~~~~~~~~
_foamSource()
{
while [ $# -ge 1 ]
do
[ "$FOAM_VERBOSE" -a "$PS1" ] && echo "Sourcing: $1"
. $1
shift
done
}


_foamSource $WM_PROJECT_DIR/etc/settings.sh
_foamSource $WM_PROJECT_DIR/etc/aliases.sh


# Source user setup files for optional packages
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# _foamSource $WM_PROJECT_DIR/etc/apps/paraview/bashrc
_foamSource $WM_PROJECT_DIR/etc/apps/paraview3/bashrc
_foamSource $WM_PROJECT_DIR/etc/apps/ensight/bashrc


# Clean environment paths again. Only remove duplicates
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#- Clean PATH
cleanEnv=`$cleanProg "$PATH"` && PATH="$cleanEnv"

#- Clean LD_LIBRARY_PATH
cleanEnv=`$cleanProg "$LD_LIBRARY_PATH"` &&
LD_LIBRARY_PATH="$cleanEnv"

#- Clean MANPATH
cleanEnv=`$cleanProg "$MANPATH"` && MANPATH="$cleanEnv:"

export PATH LD_LIBRARY_PATH MANPATH

#- Clean LD_PRELOAD
if [ "$LD_PRELOAD" != "" ]
then
cleanEnv=`$cleanProg "$LD_PRELOAD"` && LD_PRELOAD="$cleanEnv"
export LD_PRELOAD
fi


# cleanup environment:
# ~~~~~~~~~~~~~~~~~~~~
unset cleanEnv cleanProg foamInstall foamOldDirs
unset _foamSource

#
-----------------------------------------------------------------------------
cd
. $HOME/OpenFOAM/OpenFOAM-1.6/etc/bash


度々ですが、ご指導を宜しくお願いいたします。

On 11月25日, 午後2:32, IMANO Masashi <im...@arch.t.u-tokyo.ac.jp> wrote:
> 今野です。
>
> > こういった時には、最初から打ち直すものなのでしょうか？
>
> もし、端末を立ち上げ直したのであれば、OpenFOAMの環境設定を行なうために、
>
> . $HOME/OpenFOAM/OpenFOAM-1.6/etc/bash
>
> を打ち直す必要があります。
>
> 毎回打つのが面倒であれば、READMEの
>
> 1) EITHER, if running bash or ksh (if in doubt type 'echo $SHELL'), source the
> etc/bashrc file by adding the following line to the end of your
> $HOME/.bashrc file:
>
> + . $HOME/OpenFOAM/OpenFOAM-1.6/etc/bashrc
>
> に書いてある通り、
>
> . $HOME/OpenFOAM/OpenFOAM-1.6/etc/bash
>
> を $HOME/.bashrc の最後に足してから、端末を立ち上げ直してください。
>
> 上記の設定を済ましてから、
>
> cd $WM_PROJECT_DIR
> ./Allwmake
>
> を再度打ってみてください。
>

IMANO Masashi

unread,
Nov 25, 2009, 1:36:01 AM11/25/09
to open...@googlegroups.com

今野です。

> 私がbashrcに追加した内容が
> . $HOME/OpenFOAM/OpenFOAM-1.6/etc/bashrc　　でした。
> . $HOME/OpenFOAM/OpenFOAM-1.6/etc/bash　　　と打ち直しましたがエラーログは変わりません。

すみません。間違えてました。
追加するのは、

. $HOME/OpenFOAM/OpenFOAM-1.6/etc/bashrc

で合ってます。
ただし、追加する先は、

$HOME/OpenFOAM/OpenFOAM-1.6/etc/bashrc

ではなく、

$HOME/.bashrc

のほうです。$HOME/OpenFOAM/OpenFOAM-1.6/etc/bashrc を修正する必要はありません。

At Tue, 24 Nov 2009 22:30:08 -0800 (PST),

3gkl

unread,
Nov 25, 2009, 2:42:57 AM11/25/09
to OpenFOAM
今野　様

お世話になっております。　先ほどのご指摘通りに実行したところ Allwmakeは走ってくれたようです。　いくつかのエラーはあるようですが、完結
した模様です。

+ cd wmake/src
+ make
make: `all' に対して行うべき事はありません.
+ cd /home/ktech/OpenFOAM/ThirdParty-1.6
+ ./Allwmake
+ [ -n ]
+ [ -n ]
+ [ -n ]
+ [ -n ]
+ [ -n ]
+ cd malloc
+ ./Allwmake
+ wmake libso hoard
Making dependency list for source file hoard-371/src/libhoard.cpp
SOURCE=hoard-371/src/libhoard.cpp ; g++ -m32 -Dlinux -DWM_DP -Wall -
Wno-strict-aliasing -Wextra -Wno-unused-parameter -Wold-style-cast -
O3 -DNoRepository -ftemplate-depth-40 -DNDEBUG -D_REENTRANT=1 -
IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/
lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/
lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/libhoard.o
In file included from hoard-371/src/libhoard.cpp:93:
lnInclude/cpuinfo.h: In static member function ‘static int
HL::CPUInfo::getThreadId()’:
lnInclude/cpuinfo.h:216: 警告: 古いスタイルのキャストを使用しています
In file included from hoard-371/src/hoard.h:45,
from hoard-371/src/libhoard.cpp:94:
hoard-371/src/addheaderheap.h: At global scope:
hoard-371/src/addheaderheap.h:21: 警告: 古いスタイルのキャストを使用しています
hoard-371/src/addheaderheap.h:22: 警告: 古いスタイルのキャストを使用しています
In file included from hoard-371/src/hoard.h:47,
from hoard-371/src/libhoard.cpp:94:
hoard-371/src/redirectfree.h:46: 警告: 古いスタイルのキャストを使用しています
In file included from hoard-371/src/hoardsuperblock.h:11,
from hoard-371/src/hoard.h:50,
from hoard-371/src/libhoard.cpp:94:
hoard-371/src/hoardsuperblockheader.h: In constructor
‘Hoard::HoardSuperblockHeader<LockType, SuperblockSize,
HeapType>::HoardSuperblockHeader(size_t, size_t)’:
hoard-371/src/hoardsuperblockheader.h:31: 警告: 古いスタイルのキャストを使用しています
hoard-371/src/hoardsuperblockheader.h: In member function ‘void*
Hoard::HoardSuperblockHeader<LockType, SuperblockSize,
HeapType>::normalize(void*) const’:
hoard-371/src/hoardsuperblockheader.h:68: 警告: 古いスタイルのキャストを使用しています
hoard-371/src/hoardsuperblockheader.h:68: 警告: 古いスタイルのキャストを使用しています
hoard-371/src/hoardsuperblockheader.h:77: 警告: 古いスタイルのキャストを使用しています
hoard-371/src/hoardsuperblockheader.h:77: 警告: 古いスタイルのキャストを使用しています
hoard-371/src/hoardsuperblockheader.h:79: 警告: 古いスタイルのキャストを使用しています
hoard-371/src/hoardsuperblockheader.h:79: 警告: 古いスタイルのキャストを使用しています
hoard-371/src/hoardsuperblockheader.h: In member function ‘size_t
Hoard::HoardSuperblockHeader<LockType, SuperblockSize,
HeapType>::getSize(void*) const’:
hoard-371/src/hoardsuperblockheader.h:87: 警告: 古いスタイルのキャストを使用しています
hoard-371/src/hoardsuperblockheader.h:87: 警告: 古いスタイルのキャストを使用しています
In file included from hoard-371/src/hoard.h:50,
from hoard-371/src/libhoard.cpp:94:
hoard-371/src/hoardsuperblock.h: In static member function ‘static
Hoard::HoardSuperblock<LockType, SuperblockSize, HeapType>*
Hoard::HoardSuperblock<LockType, SuperblockSize,
HeapType>::getSuperblock(void*)’:
hoard-371/src/hoardsuperblock.h:31: 警告: 古いスタイルのキャストを使用しています
hoard-371/src/hoardsuperblock.h:31: 警告: 古いスタイルのキャストを使用しています
hoard-371/src/hoardsuperblock.h:31: 警告: 古いスタイルのキャストを使用しています
hoard-371/src/hoardsuperblock.h: In member function ‘bool
Hoard::HoardSuperblock<LockType, SuperblockSize, HeapType>::inRange
(void*) const’:
hoard-371/src/hoardsuperblock.h:138: 警告: 古いスタイルのキャストを使用しています
hoard-371/src/hoardsuperblock.h:139: 警告: 古いスタイルのキャストを使用しています
hoard-371/src/hoardsuperblock.h:140: 警告: 古いスタイルのキャストを使用しています
In file included from lnInclude/myhashmap.h:7,
from lnInclude/mmapheap.h:43,
from hoard-371/src/alignedsuperblockheap.h:6,
from hoard-371/src/hoard.h:52,
from hoard-371/src/libhoard.cpp:94:
lnInclude/hash.h: In function ‘size_t HL::hash(Key) [with Key =
void*]’:
lnInclude/hash.h:12: 警告: 古いスタイルのキャストを使用しています
lnInclude/hash.h: In function ‘size_t HL::hash(Key) [with Key = const
void*]’:
lnInclude/hash.h:17: 警告: 古いスタイルのキャストを使用しています
lnInclude/hash.h:17: 警告: 古いスタイルのキャストを使用しています
lnInclude/hash.h: In function ‘size_t HL::hash(Key) [with Key =
int]’:
lnInclude/hash.h:22: 警告: 古いスタイルのキャストを使用しています
In file included from lnInclude/mmapheap.h:43,
from hoard-371/src/alignedsuperblockheap.h:6,
from hoard-371/src/hoard.h:52,
from hoard-371/src/libhoard.cpp:94:
lnInclude/myhashmap.h: In member function ‘void HL::MyHashMap<Key,
Value, Allocator>::set(Key, Value)’:
lnInclude/myhashmap.h:28: 警告: 古いスタイルのキャストを使用しています
lnInclude/myhashmap.h: In member function ‘Value HL::MyHashMap<Key,
Value, Allocator>::get(Key)’:
lnInclude/myhashmap.h:42: 警告: 古いスタイルのキャストを使用しています
lnInclude/myhashmap.h: In member function ‘void HL::MyHashMap<Key,
Value, Allocator>::erase(Key)’:
lnInclude/myhashmap.h:55: 警告: 古いスタイルのキャストを使用しています
lnInclude/myhashmap.h: In member function ‘void HL::MyHashMap<Key,
Value, Allocator>::insert(Key, Value)’:
lnInclude/myhashmap.h:81: 警告: 古いスタイルのキャストを使用しています
In file included from lnInclude/mmapheap.h:44,
from hoard-371/src/alignedsuperblockheap.h:6,
from hoard-371/src/hoard.h:52,
from hoard-371/src/libhoard.cpp:94:
lnInclude/stlallocator.h: In member function ‘size_t
HL::STLAllocator<T, Super>::max_size() const’:
lnInclude/stlallocator.h:116: 警告: 古いスタイルのキャストを使用しています
lnInclude/stlallocator.h:117: 警告: 古いスタイルのキャストを使用しています
In file included from lnInclude/mmapheap.h:46,
from hoard-371/src/alignedsuperblockheap.h:6,
from hoard-371/src/hoard.h:52,
from hoard-371/src/libhoard.cpp:94:
lnInclude/zoneheap.h: In destructor ‘HL::ZoneHeap<Super,
ChunkSize>::~ZoneHeap()’:
lnInclude/zoneheap.h:37: 警告: 古いスタイルのキャストを使用しています
lnInclude/zoneheap.h: In member function ‘void* HL::ZoneHeap<Super,
ChunkSize>::zoneMalloc(size_t)’:
lnInclude/zoneheap.h:70: 警告: 古いスタイルのキャストを使用しています
lnInclude/zoneheap.h:82: 警告: 古いスタイルのキャストを使用しています
lnInclude/zoneheap.h:86: 警告: 古いスタイルのキャストを使用しています
In file included from lnInclude/mmapheap.h:48,
from hoard-371/src/alignedsuperblockheap.h:6,
from hoard-371/src/hoard.h:52,
from hoard-371/src/libhoard.cpp:94:
lnInclude/spinlock.h: At global scope:
lnInclude/spinlock.h:140: 警告: 関数戻り値の型修飾子は無視されました
lnInclude/spinlock.h:199: 警告: 関数戻り値の型修飾子は無視されました
In file included from hoard-371/src/alignedsuperblockheap.h:6,
from hoard-371/src/hoard.h:52,
from hoard-371/src/libhoard.cpp:94:
lnInclude/mmapheap.h: In member function ‘void*
HL::PrivateMmapHeap::malloc(size_t)’:
lnInclude/mmapheap.h:130: 警告: 古いスタイルのキャストを使用しています
lnInclude/mmapheap.h: In member function ‘void
HL::PrivateMmapHeap::free(void*, size_t)’:
lnInclude/mmapheap.h:151: 警告: 古いスタイルのキャストを使用しています
In file included from hoard-371/src/alignedsuperblockheap.h:12,
from hoard-371/src/hoard.h:52,
from hoard-371/src/libhoard.cpp:94:
lnInclude/dllist.h: In member function ‘HL::DLList::Entry*
HL::DLList::get()’:
lnInclude/dllist.h:69: 警告: 古いスタイルのキャストを使用しています
In file included from hoard-371/src/alignedmmap.h:15,
from hoard-371/src/alignedsuperblockheap.h:15,
from hoard-371/src/hoard.h:52,
from hoard-371/src/libhoard.cpp:94:
lnInclude/mmapwrapper.h: In static member function ‘static void*
HL::MmapWrapper::map(size_t)’:
lnInclude/mmapwrapper.h:108: 警告: 古いスタイルのキャストを使用しています
In file included from hoard-371/src/alignedmmap.h:16,
from hoard-371/src/alignedsuperblockheap.h:15,
from hoard-371/src/hoard.h:52,
from hoard-371/src/libhoard.cpp:94:
hoard-371/src/bumpalloc.h: In member function ‘void
Hoard::BumpAlloc<ChunkSize, super>::refill(size_t)’:
hoard-371/src/bumpalloc.h:50: 警告: 古いスタイルのキャストを使用しています
In file included from hoard-371/src/alignedsuperblockheap.h:15,
from hoard-371/src/hoard.h:52,
from hoard-371/src/libhoard.cpp:94:
hoard-371/src/alignedmmap.h: In member function ‘void*
Hoard::AlignedMmapInstance<Alignment_>::malloc(size_t)’:
hoard-371/src/alignedmmap.h:44: 警告: 古いスタイルのキャストを使用しています
hoard-371/src/alignedmmap.h:44: 警告: 古いスタイルのキャストを使用しています
hoard-371/src/alignedmmap.h:61: 警告: 古いスタイルのキャストを使用しています
hoard-371/src/alignedmmap.h:78: 警告: 古いスタイルのキャストを使用しています
hoard-371/src/alignedmmap.h:78: 警告: 古いスタイルのキャストを使用しています
hoard-371/src/alignedmmap.h:86: 警告: 古いスタイルのキャストを使用しています
hoard-371/src/alignedmmap.h: In static member function ‘static char*
Hoard::AlignedMmapInstance<Alignment_>::align(char*)’:
hoard-371/src/alignedmmap.h:122: 警告: 古いスタイルのキャストを使用しています
hoard-371/src/alignedmmap.h:122: 警告: 古いスタイルのキャストを使用しています
In file included from hoard-371/src/hoard.h:52,
from hoard-371/src/libhoard.cpp:94:
hoard-371/src/alignedsuperblockheap.h: In member function ‘void*
Hoard::SuperblockStore<SuperblockSize>::malloc(size_t)’:
hoard-371/src/alignedsuperblockheap.h:34: 警告: 古いスタイルのキャストを使用しています
hoard-371/src/alignedsuperblockheap.h:36: 警告: 古いスタイルのキャストを使用しています
hoard-371/src/alignedsuperblockheap.h: In member function ‘void
Hoard::SuperblockStore<SuperblockSize>::free(void*)’:
hoard-371/src/alignedsuperblockheap.h:44: 警告: 古いスタイルのキャストを使用しています
In file included from hoard-371/src/hoard.h:54,
from hoard-371/src/libhoard.cpp:94:
hoard-371/src/globalheap.h: In member function ‘void
Hoard::GlobalHeap<SuperblockSize, EmptinessClasses, LockType>::put
(void*, size_t)’:
hoard-371/src/globalheap.h:35: 警告: 古いスタイルのキャストを使用しています
In file included from hoard-371/src/hoard.h:59,
from hoard-371/src/libhoard.cpp:94:
lnInclude/debugheap.h: In member function ‘void* HL::DebugHeap<Super,
freeChar>::malloc(size_t)’:
lnInclude/debugheap.h:31: 警告: 古いスタイルのキャストを使用しています
lnInclude/debugheap.h:31: 警告: 古いスタイルのキャストを使用しています
lnInclude/debugheap.h:31: 警告: 古いスタイルのキャストを使用しています
lnInclude/debugheap.h: In member function ‘void HL::DebugHeap<Super,
freeChar>::free(void*)’:
lnInclude/debugheap.h:38: 警告: 古いスタイルのキャストを使用しています
lnInclude/debugheap.h:41: 警告: 古いスタイルのキャストを使用しています
In file included from hoard-371/src/hoard.h:68,
from hoard-371/src/libhoard.cpp:94:
lnInclude/threadheap.h: At global scope:
lnInclude/threadheap.h:70: 警告: 関数戻り値の型修飾子は無視されました
lnInclude/threadheap.h:92: 警告: 関数戻り値の型修飾子は無視されました
lnInclude/threadheap.h: In static member function ‘static volatile int
HL::ThreadHeap<NumHeaps, PerThreadHeap>::getThreadId()’:
lnInclude/threadheap.h:106: 警告: 古いスタイルのキャストを使用しています
In file included from hoard-371/src/hoard.h:69,
from hoard-371/src/libhoard.cpp:94:
lnInclude/hybridheap.h: At global scope:
lnInclude/hybridheap.h:26: 警告: 古いスタイルのキャストを使用しています
lnInclude/hybridheap.h:26: 警告: 古いスタイルのキャストを使用しています
lnInclude/hybridheap.h:27: 警告: 古いスタイルのキャストを使用しています
lnInclude/hybridheap.h:28: 警告: 古いスタイルのキャストを使用しています
In file included from hoard-371/src/libhoard.cpp:94:
hoard-371/src/hoard.h: In static member function ‘static bool
Hoard::hoardThresholdFunctionClass::function(int, int, size_t)’:
hoard-371/src/hoard.h:96: 警告: 古いスタイルのキャストを使用しています
In file included from hoard-371/src/libhoard.cpp:95:
hoard-371/src/heapmanager.h: In member function ‘void
Hoard::HeapManager<LockType, HeapType>::chooseZero()’:
hoard-371/src/heapmanager.h:35: 警告: 古いスタイルのキャストを使用しています
In file included from hoard-371/src/libhoard.cpp:96:
hoard-371/src/tlab.h: In member function ‘void
Hoard::ThreadLocalAllocationBuffer<NumBins, getSizeClass,
getClassSize, LargestObject, LocalHeapThreshold, SuperblockType,
SuperblockSize, ParentHeap>::free(void*)’:
hoard-371/src/tlab.h:86: 警告: 古いスタイルのキャストを使用しています
In file included from hoard-371/src/libhoard.cpp:158:
hoard-371/src/userealtls.cpp: In function ‘TheCustomHeapType*
initializeCustomHeap()’:
hoard-371/src/userealtls.cpp:38: 警告: 古いスタイルのキャストを使用しています
hoard-371/src/userealtls.cpp:39: 警告: 古いスタイルのキャストを使用しています
In file included from hoard-371/src/libhoard.cpp:158:
hoard-371/src/userealtls.cpp: In function ‘int pthread_create
(pthread_t*, const pthread_attr_t*, void* (*)(void*), void*)’:
hoard-371/src/userealtls.cpp:261: 警告: unused variable ‘t’
'/home/ktech/OpenFOAM/OpenFOAM-1.6/lib/linuxGccDPOpt/libhoard.so' is
up to date.
+ wmake libo fbsdmalloc
Making dependency list for source file fbsdmalloc.c
could not open file libc_private.h for source file fbsdmalloc.c
could not open file spinlock.h for source file fbsdmalloc.c
SOURCE=fbsdmalloc.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/
lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/
lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/fbsdmalloc.o
ld -melf_i386 -r -o /home/ktech/OpenFOAM/OpenFOAM-1.6/lib/
linuxGccDPOpt/libfbsdmalloc.o Make/linuxGccDPOpt/fbsdmalloc.o
'/home/ktech/OpenFOAM/OpenFOAM-1.6/lib/linuxGccDPOpt/libfbsdmalloc.o'
is up to date.
+ [ -r /home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/platforms/
linuxGccDPOpt/lib/libmpi.so ]
+ echo have OPENMPI shared library
have OPENMPI shared library
+ cd scotch_5.1
+ wmake libso src/libscotch
Making dependency list for source file arch.c
Making dependency list for source file arch_build.c
Making dependency list for source file arch_cmplt.c
Making dependency list for source file arch_cmpltw.c
Making dependency list for source file arch_deco.c
Making dependency list for source file arch_hcub.c
Making dependency list for source file arch_mesh.c
Making dependency list for source file arch_tleaf.c
Making dependency list for source file arch_torus.c
Making dependency list for source file arch_vcmplt.c
Making dependency list for source file arch_vhcub.c
Making dependency list for source file bgraph.c
Making dependency list for source file bgraph_bipart_bd.c
Making dependency list for source file bgraph_bipart_df.c
Making dependency list for source file bgraph_bipart_ex.c
Making dependency list for source file bgraph_bipart_fm.c
Making dependency list for source file bgraph_bipart_gg.c
Making dependency list for source file bgraph_bipart_gp.c
Making dependency list for source file bgraph_bipart_ml.c
Making dependency list for source file bgraph_bipart_st.c
Making dependency list for source file bgraph_bipart_zr.c
Making dependency list for source file bgraph_check.c
Making dependency list for source file bgraph_store.c
Making dependency list for source file common.c
Making dependency list for source file common_file.c
Making dependency list for source file common_file_compress.c
Making dependency list for source file common_file_uncompress.c
Making dependency list for source file common_integer.c
Making dependency list for source file common_memory.c
Making dependency list for source file common_stub.c
Making dependency list for source file gain.c
Making dependency list for source file geom.c
Making dependency list for source file graph.c
Making dependency list for source file graph_base.c
Making dependency list for source file graph_check.c
Making dependency list for source file graph_coarsen.c
Making dependency list for source file graph_induce.c
Making dependency list for source file graph_io.c
Making dependency list for source file graph_io_chac.c
Making dependency list for source file graph_io_habo.c
Making dependency list for source file graph_io_mmkt.c
Making dependency list for source file graph_io_scot.c
Making dependency list for source file graph_list.c
Making dependency list for source file hall_order_hd.c
Making dependency list for source file hall_order_hf.c
Making dependency list for source file hall_order_hx.c
Making dependency list for source file hgraph.c
Making dependency list for source file hgraph_check.c
Making dependency list for source file hgraph_induce.c
Making dependency list for source file hgraph_order_bl.c
Making dependency list for source file hgraph_order_cp.c
Making dependency list for source file hgraph_order_gp.c
Making dependency list for source file hgraph_order_hd.c
Making dependency list for source file hgraph_order_hf.c
Making dependency list for source file hgraph_order_hx.c
Making dependency list for source file hgraph_order_nd.c
Making dependency list for source file hgraph_order_si.c
Making dependency list for source file hgraph_order_st.c
Making dependency list for source file hmesh.c
Making dependency list for source file hmesh_check.c
Making dependency list for source file hmesh_hgraph.c
Making dependency list for source file hmesh_induce.c
Making dependency list for source file hmesh_mesh.c
Making dependency list for source file hmesh_order_bl.c
Making dependency list for source file hmesh_order_cp.c
Making dependency list for source file hmesh_order_gr.c
Making dependency list for source file hmesh_order_gp.c
Making dependency list for source file hmesh_order_hd.c
Making dependency list for source file hmesh_order_hf.c
Making dependency list for source file hmesh_order_hx.c
Making dependency list for source file hmesh_order_nd.c
Making dependency list for source file hmesh_order_si.c
Making dependency list for source file hmesh_order_st.c
Making dependency list for source file kgraph.c
Making dependency list for source file kgraph_map_rb.c
Making dependency list for source file kgraph_map_rb_map.c
Making dependency list for source file kgraph_map_rb_part.c
Making dependency list for source file kgraph_map_st.c
Making dependency list for source file library_arch.c
Making dependency list for source file library_arch_f.c
Making dependency list for source file library_arch_build.c
Making dependency list for source file library_arch_build_f.c
Making dependency list for source file library_arch_cmpltw.c
Making dependency list for source file library_arch_cmpltw_f.c
Making dependency list for source file library_geom.c
Making dependency list for source file library_geom_f.c
Making dependency list for source file library_graph.c
Making dependency list for source file library_graph_f.c
Making dependency list for source file library_graph_base.c
Making dependency list for source file library_graph_base_f.c
Making dependency list for source file library_graph_check.c
Making dependency list for source file library_graph_check_f.c
Making dependency list for source file library_graph_io_chac.c
Making dependency list for source file library_graph_io_chac_f.c
Making dependency list for source file library_graph_io_habo.c
Making dependency list for source file library_graph_io_habo_f.c
Making dependency list for source file library_graph_io_mmkt.c
Making dependency list for source file library_graph_io_mmkt_f.c
Making dependency list for source file library_graph_io_scot.c
Making dependency list for source file library_graph_io_scot_f.c
Making dependency list for source file library_graph_map.c
Making dependency list for source file library_graph_map_f.c
Making dependency list for source file library_graph_map_view.c
Making dependency list for source file library_graph_map_view_f.c
Making dependency list for source file library_graph_order.c
Making dependency list for source file library_graph_order_f.c
Making dependency list for source file library_mesh.c
Making dependency list for source file library_mesh_f.c
Making dependency list for source file library_mesh_graph.c
Making dependency list for source file library_mesh_graph_f.c
Making dependency list for source file library_mesh_io_habo.c
Making dependency list for source file library_mesh_io_habo_f.c
Making dependency list for source file library_mesh_io_scot.c
Making dependency list for source file library_mesh_io_scot_f.c
Making dependency list for source file library_mesh_order.c
Making dependency list for source file library_mesh_order_f.c
Making dependency list for source file library_parser.c
Making dependency list for source file library_parser_f.c
Making dependency list for source file library_random.c
Making dependency list for source file library_random_f.c
Making dependency list for source file mapping.c
Making dependency list for source file mapping_io.c
Making dependency list for source file mesh.c
Making dependency list for source file mesh_check.c
Making dependency list for source file mesh_coarsen.c
Making dependency list for source file mesh_graph.c
Making dependency list for source file mesh_induce_sepa.c
Making dependency list for source file mesh_io.c
Making dependency list for source file mesh_io_habo.c
Making dependency list for source file mesh_io_scot.c
Making dependency list for source file order.c
Making dependency list for source file order_check.c
Making dependency list for source file order_io.c
Making dependency list for source file parser.c
Making dependency list for source file parser_ll.l
Making dependency list for source file parser_yy.y
Making dependency list for source file vgraph.c
Making dependency list for source file vgraph_check.c
Making dependency list for source file vgraph_separate_bd.c
Making dependency list for source file vgraph_separate_es.c
Making dependency list for source file vgraph_separate_fm.c
Making dependency list for source file vgraph_separate_gg.c
Making dependency list for source file vgraph_separate_gp.c
Making dependency list for source file vgraph_separate_ml.c
Making dependency list for source file vgraph_separate_st.c
Making dependency list for source file vgraph_separate_th.c
Making dependency list for source file vgraph_separate_vw.c
Making dependency list for source file vgraph_separate_zr.c
Making dependency list for source file vgraph_store.c
Making dependency list for source file vmesh.c
Making dependency list for source file vmesh_check.c
Making dependency list for source file vmesh_separate_fm.c
Making dependency list for source file vmesh_separate_gg.c
Making dependency list for source file vmesh_separate_gr.c
Making dependency list for source file vmesh_separate_ml.c
Making dependency list for source file vmesh_separate_zr.c
Making dependency list for source file vmesh_separate_st.c
Making dependency list for source file vmesh_store.c
Making dependency list for source file library_error_exit.c
SOURCE=arch.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
Drestrict=__restrict -DCOMMON_FILE_COMPRESS_GZ -
DCOMMON_RANDOM_FIXED_SEED -DCOMMON_TIMING_OLD -DSCOTCH_RENAME -I../../
include -DSCOTCH_VERSION=\""5.1"\" -IlnInclude -I. -I/home/ktech/
OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/arch.o
SOURCE=arch_build.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
Drestrict=__restrict -DCOMMON_FILE_COMPRESS_GZ -
DCOMMON_RANDOM_FIXED_SEED -DCOMMON_TIMING_OLD -DSCOTCH_RENAME -I../../
include -DSCOTCH_VERSION=\""5.1"\" -IlnInclude -I. -I/home/ktech/
OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/arch_build.o
SOURCE=arch_cmplt.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
Drestrict=__restrict -DCOMMON_FILE_COMPRESS_GZ -
DCOMMON_RANDOM_FIXED_SEED -DCOMMON_TIMING_OLD -DSCOTCH_RENAME -I../../
include -DSCOTCH_VERSION=\""5.1"\" -IlnInclude -I. -I/home/ktech/
OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/arch_cmplt.o
SOURCE=arch_cmpltw.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
Drestrict=__restrict -DCOMMON_FILE_COMPRESS_GZ -
DCOMMON_RANDOM_FIXED_SEED -DCOMMON_TIMING_OLD -DSCOTCH_RENAME -I../../
include -DSCOTCH_VERSION=\""5.1"\" -IlnInclude -I. -I/home/ktech/
OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/arch_cmpltw.o
SOURCE=arch_deco.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
Drestrict=__restrict -DCOMMON_FILE_COMPRESS_GZ -
DCOMMON_RANDOM_FIXED_SEED -DCOMMON_TIMING_OLD -DSCOTCH_RENAME -I../../
include -DSCOTCH_VERSION=\""5.1"\" -IlnInclude -I. -I/home/ktech/
OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/arch_deco.o
SOURCE=arch_hcub.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
Drestrict=__restrict -DCOMMON_FILE_COMPRESS_GZ -
DCOMMON_RANDOM_FIXED_SEED -DCOMMON_TIMING_OLD -DSCOTCH_RENAME -I../../
include -DSCOTCH_VERSION=\""5.1"\" -IlnInclude -I. -I/home/ktech/
OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/arch_hcub.o
SOURCE=arch_mesh.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
Drestrict=__restrict -DCOMMON_FILE_COMPRESS_GZ -
DCOMMON_RANDOM_FIXED_SEED -DCOMMON_TIMING_OLD -DSCOTCH_RENAME -I../../
include -DSCOTCH_VERSION=\""5.1"\" -IlnInclude -I. -I/home/ktech/
OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/arch_mesh.o
SOURCE=arch_tleaf.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
Drestrict=__restrict -DCOMMON_FILE_COMPRESS_GZ -
DCOMMON_RANDOM_FIXED_SEED -DCOMMON_TIMING_OLD -DSCOTCH_RENAME -I../../
include -DSCOTCH_VERSION=\""5.1"\" -IlnInclude -I. -I/home/ktech/
OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/arch_tleaf.o
SOURCE=arch_torus.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
Drestrict=__restrict -DCOMMON_FILE_COMPRESS_GZ -
DCOMMON_RANDOM_FIXED_SEED -DCOMMON_TIMING_OLD -DSCOTCH_RENAME -I../../
include -DSCOTCH_VERSION=\""5.1"\" -IlnInclude -I. -I/home/ktech/
OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/arch_torus.o
SOURCE=arch_vcmplt.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
Drestrict=__restrict -DCOMMON_FILE_COMPRESS_GZ -
DCOMMON_RANDOM_FIXED_SEED -DCOMMON_TIMING_OLD -DSCOTCH_RENAME -I../../
include -DSCOTCH_VERSION=\""5.1"\" -IlnInclude -I. -I/home/ktech/
OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/arch_vcmplt.o
SOURCE=arch_vhcub.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
Drestrict=__restrict -DCOMMON_FILE_COMPRESS_GZ -
DCOMMON_RANDOM_FIXED_SEED -DCOMMON_TIMING_OLD -DSCOTCH_RENAME -I../../
include -DSCOTCH_VERSION=\""5.1"\" -IlnInclude -I. -I/home/ktech/
OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/arch_vhcub.o
SOURCE=bgraph.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
Drestrict=__restrict -DCOMMON_FILE_COMPRESS_GZ -
DCOMMON_RANDOM_FIXED_SEED -DCOMMON_TIMING_OLD -DSCOTCH_RENAME -I../../
include -DSCOTCH_VERSION=\""5.1"\" -IlnInclude -I. -I/home/ktech/
OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/bgraph.o
SOURCE=bgraph_bipart_bd.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
Drestrict=__restrict -DCOMMON_FILE_COMPRESS_GZ -
DCOMMON_RANDOM_FIXED_SEED -DCOMMON_TIMING_OLD -DSCOTCH_RENAME -I../../
include -DSCOTCH_VERSION=\""5.1"\" -IlnInclude -I. -I/home/ktech/
OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/bgraph_bipart_bd.o
SOURCE=bgraph_bipart_df.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
Drestrict=__restrict -DCOMMON_FILE_COMPRESS_GZ -
DCOMMON_RANDOM_FIXED_SEED -DCOMMON_TIMING_OLD -DSCOTCH_RENAME -I../../
include -DSCOTCH_VERSION=\""5.1"\" -IlnInclude -I. -I/home/ktech/
OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/bgraph_bipart_df.o
SOURCE=bgraph_bipart_ex.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
Drestrict=__restrict -DCOMMON_FILE_COMPRESS_GZ -
DCOMMON_RANDOM_FIXED_SEED -DCOMMON_TIMING_OLD -DSCOTCH_RENAME -I../../
include -DSCOTCH_VERSION=\""5.1"\" -IlnInclude -I. -I/home/ktech/
OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/bgraph_bipart_ex.o
SOURCE=bgraph_bipart_fm.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
Drestrict=__restrict -DCOMMON_FILE_COMPRESS_GZ -
DCOMMON_RANDOM_FIXED_SEED -DCOMMON_TIMING_OLD -DSCOTCH_RENAME -I../../
include -DSCOTCH_VERSION=\""5.1"\" -IlnInclude -I. -I/home/ktech/
OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/bgraph_bipart_fm.o
SOURCE=bgraph_bipart_gg.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
Drestrict=__restrict -DCOMMON_FILE_COMPRESS_GZ -
DCOMMON_RANDOM_FIXED_SEED -DCOMMON_TIMING_OLD -DSCOTCH_RENAME -I../../
include -DSCOTCH_VERSION=\""5.1"\" -IlnInclude -I. -I/home/ktech/
OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/bgraph_bipart_gg.o
SOURCE=bgraph_bipart_gp.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
Drestrict=__restrict -DCOMMON_FILE_COMPRESS_GZ -
DCOMMON_RANDOM_FIXED_SEED -DCOMMON_TIMING_OLD -DSCOTCH_RENAME -I../../
include -DSCOTCH_VERSION=\""5.1"\" -IlnInclude -I. -I/home/ktech/
OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/bgraph_bipart_gp.o
SOURCE=bgraph_bipart_ml.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
Drestrict=__restrict -DCOMMON_FILE_COMPRESS_GZ -
DCOMMON_RANDOM_FIXED_SEED -DCOMMON_TIMING_OLD -DSCOTCH_RENAME -I../../
include -DSCOTCH_VERSION=\""5.1"\" -IlnInclude -I. -I/home/ktech/
OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/bgraph_bipart_ml.o
SOURCE=bgraph_bipart_st.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
Drestrict=__restrict -DCOMMON_FILE_COMPRESS_GZ -
DCOMMON_RANDOM_FIXED_SEED -DCOMMON_TIMING_OLD -DSCOTCH_RENAME -I../../
include -DSCOTCH_VERSION=\""5.1"\" -IlnInclude -I. -I/home/ktech/
OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/bgraph_bipart_st.o
SOURCE=bgraph_bipart_zr.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
Drestrict=__restrict -DCOMMON_FILE_COMPRESS_GZ -
DCOMMON_RANDOM_FIXED_SEED -DCOMMON_TIMING_OLD -DSCOTCH_RENAME -I../../
include -DSCOTCH_VERSION=\""5.1"\" -IlnInclude -I. -I/home/ktech/
OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/bgraph_bipart_zr.o
SOURCE=bgraph_check.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
Drestrict=__restrict -DCOMMON_FILE_COMPRESS_GZ -
DCOMMON_RANDOM_FIXED_SEED -DCOMMON_TIMING_OLD -DSCOTCH_RENAME -I../../
include -DSCOTCH_VERSION=\""5.1"\" -IlnInclude -I. -I/home/ktech/
OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/bgraph_check.o
SOURCE=bgraph_store.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
Drestrict=__restrict -DCOMMON_FILE_COMPRESS_GZ -
DCOMMON_RANDOM_FIXED_SEED -DCOMMON_TIMING_OLD -DSCOTCH_RENAME -I../../
include -DSCOTCH_VERSION=\""5.1"\" -IlnInclude -I. -I/home/ktech/
OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/bgraph_store.o
SOURCE=common.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
Drestrict=__restrict -DCOMMON_FILE_COMPRESS_GZ -
DCOMMON_RANDOM_FIXED_SEED -DCOMMON_TIMING_OLD -DSCOTCH_RENAME -I../../
include -DSCOTCH_VERSION=\""5.1"\" -IlnInclude -I. -I/home/ktech/
OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/common.o
SOURCE=common_file.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
Drestrict=__restrict -DCOMMON_FILE_COMPRESS_GZ -
DCOMMON_RANDOM_FIXED_SEED -DCOMMON_TIMING_OLD -DSCOTCH_RENAME -I../../
include -DSCOTCH_VERSION=\""5.1"\" -IlnInclude -I. -I/home/ktech/
OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/common_file.o
SOURCE=common_file_compress.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
Drestrict=__restrict -DCOMMON_FILE_COMPRESS_GZ -
DCOMMON_RANDOM_FIXED_SEED -DCOMMON_TIMING_OLD -DSCOTCH_RENAME -I../../
include -DSCOTCH_VERSION=\""5.1"\" -IlnInclude -I. -I/home/ktech/
OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/common_file_compress.o
common_file_compress.c:62:18: error: zlib.h: No such file or
directory
common_file_compress.c: In function ‘fileCompressGz’:
common_file_compress.c:283: error: ‘gzFile’ undeclared (first use in
this function)
common_file_compress.c:283: error: (Each undeclared identifier is
reported only once
common_file_compress.c:283: error: for each function it appears in.)
common_file_compress.c:283: error: expected ‘;’ before ‘gzfile’
common_file_compress.c:286: error: ‘gzfile’ undeclared (first use in
this function)
common_file_compress.c:286: 警告: implicit declaration of function
‘gzdopen’
common_file_compress.c:290: 警告: implicit declaration of function
‘gzsetparams’
common_file_compress.c:290: error: ‘Z_DEFAULT_STRATEGY’ undeclared
(first use in this function)
common_file_compress.c:293: 警告: implicit declaration of function
‘gzwrite’
common_file_compress.c:301: 警告: implicit declaration of function
‘gzclose’
make: *** [Make/linuxGccDPOpt/common_file_compress.o] エラー 1
+ cd metis-5.0pre2
+ wmake libso GKlib
Making dependency list for source file trunk/b64.c
Making dependency list for source file trunk/blas.c
Making dependency list for source file trunk/dfkvkselect.c
Making dependency list for source file trunk/dlmalloc.c
Making dependency list for source file trunk/error.c
Making dependency list for source file trunk/fs.c
Making dependency list for source file trunk/getopt.c
Making dependency list for source file trunk/htable.c
Making dependency list for source file trunk/io.c
Making dependency list for source file trunk/memory.c
Making dependency list for source file trunk/omp.c
Making dependency list for source file trunk/pdb.c
Making dependency list for source file trunk/pqueue.c
Making dependency list for source file trunk/seq.c
Making dependency list for source file trunk/sort.c
Making dependency list for source file trunk/string.c
Making dependency list for source file trunk/timers.c
Making dependency list for source file trunk/tokenizer.c
Making dependency list for source file trunk/util.c
SOURCE=trunk/b64.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -IlnInclude
-I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/
ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c
$SOURCE -o Make/linuxGccDPOpt/b64.o
SOURCE=trunk/blas.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/
lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/
lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/blas.o
SOURCE=trunk/dfkvkselect.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/
lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/
lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/dfkvkselect.o
SOURCE=trunk/dlmalloc.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/
lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/
lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/dlmalloc.o
SOURCE=trunk/error.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/
lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/
lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/error.o
SOURCE=trunk/fs.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -IlnInclude -
I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/
ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c
$SOURCE -o Make/linuxGccDPOpt/fs.o
SOURCE=trunk/getopt.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/
lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/
lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/getopt.o
SOURCE=trunk/htable.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/
lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/
lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/htable.o
SOURCE=trunk/io.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -IlnInclude -
I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/
ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c
$SOURCE -o Make/linuxGccDPOpt/io.o
SOURCE=trunk/memory.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/
lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/
lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/memory.o
SOURCE=trunk/omp.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -IlnInclude
-I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/
ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c
$SOURCE -o Make/linuxGccDPOpt/omp.o
SOURCE=trunk/pdb.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -IlnInclude
-I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/
ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c
$SOURCE -o Make/linuxGccDPOpt/pdb.o
SOURCE=trunk/pqueue.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/
lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/
lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/pqueue.o
SOURCE=trunk/seq.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -IlnInclude
-I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/
ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c
$SOURCE -o Make/linuxGccDPOpt/seq.o
SOURCE=trunk/sort.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/
lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/
lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/sort.o
SOURCE=trunk/string.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/
lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/
lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/string.o
trunk/string.c: In function ‘gk_str2time’:
trunk/string.c:472: 警告: implicit declaration of function ‘strptime’
trunk/string.c:472: 警告: ポインタと整数との比較を行なっています
SOURCE=trunk/timers.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/
lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/
lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/timers.o
SOURCE=trunk/tokenizer.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/
lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/
lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/tokenizer.o
SOURCE=trunk/util.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/
lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/
lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/util.o
'/home/ktech/OpenFOAM/OpenFOAM-1.6/lib/linuxGccDPOpt/libGKlib.so' is
up to date.
+ wmake libso libmetis
Making dependency list for source file balance.c
Making dependency list for source file bucketsort.c
Making dependency list for source file ccgraph.c
Making dependency list for source file checkgraph.c
Making dependency list for source file cmetis.c
Making dependency list for source file coarsen.c
Making dependency list for source file compress.c
Making dependency list for source file debug.c
Making dependency list for source file estmem.c
Making dependency list for source file fm.c
Making dependency list for source file fortran.c
Making dependency list for source file frename.c
Making dependency list for source file graph.c
Making dependency list for source file initpart.c
Making dependency list for source file kmetis.c
Making dependency list for source file kvmetis.c
Making dependency list for source file kwayfm.c
Making dependency list for source file kwayrefine.c
Making dependency list for source file kwayvolfm.c
Making dependency list for source file kwayvolrefine.c
Making dependency list for source file match.c
Making dependency list for source file mbalance2.c
Making dependency list for source file mbalance.c
Making dependency list for source file mcoarsen.c
Making dependency list for source file memory.c
Making dependency list for source file mesh.c
Making dependency list for source file meshpart.c
Making dependency list for source file mfm2.c
Making dependency list for source file mfm.c
Making dependency list for source file mincover.c
Making dependency list for source file minitpart2.c
Making dependency list for source file minitpart.c
Making dependency list for source file mkmetis.c
Making dependency list for source file mkwayfmh.c
Making dependency list for source file mkwayrefine.c
Making dependency list for source file mmatch.c
Making dependency list for source file mmd.c
Making dependency list for source file mpmetis.c
Making dependency list for source file mrefine2.c
Making dependency list for source file mrefine.c
Making dependency list for source file mrkmetis.c
Making dependency list for source file mutil.c
Making dependency list for source file myqsort.c
Making dependency list for source file ometis.c
Making dependency list for source file parmetis.c
Making dependency list for source file pmetis.c
Making dependency list for source file pqueue.c
Making dependency list for source file refine.c
Making dependency list for source file rkmetis.c
Making dependency list for source file separator.c
Making dependency list for source file sfm.c
Making dependency list for source file srefine.c
Making dependency list for source file stat.c
Making dependency list for source file streamio.c
Making dependency list for source file subdomains.c
Making dependency list for source file timing.c
Making dependency list for source file util.c
SOURCE=balance.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
balance.o
balance.c: In function ‘libmetis__Balance2Way’:
balance.c:22: 警告: unused variable ‘ed’
balance.c:22: 警告: unused variable ‘id’
balance.c:21: 警告: unused variable ‘gain’
balance.c:21: 警告: unused variable ‘imax’
balance.c:21: 警告: unused variable ‘from’
balance.c:21: 警告: unused variable ‘nvtxs’
balance.c:21: 警告: unused variable ‘j’
balance.c:21: 警告: unused variable ‘i’
balance.c: In function ‘libmetis__Bnd2WayBalance’:
balance.c:48: 警告: unused variable ‘me’
balance.c:48: 警告: unused variable ‘pass’
balance.c: In function ‘libmetis__General2WayBalance’:
balance.c:174: 警告: unused variable ‘me’
balance.c:174: 警告: unused variable ‘pass’
SOURCE=bucketsort.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../
include -I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/bucketsort.o
SOURCE=ccgraph.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
ccgraph.o
ccgraph.c: In function ‘libmetis__CreateCoarseGraph’:
ccgraph.c:79: 警告: value computed is not used
ccgraph.c:22: 警告: unused variable ‘l’
ccgraph.c: In function ‘libmetis__CreateCoarseGraphNoMask’:
ccgraph.c:247: 警告: value computed is not used
ccgraph.c: In function ‘libmetis__CreateCoarseGraph_NVW’:
ccgraph.c:330: 警告: unused variable ‘l’
SOURCE=checkgraph.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../
include -I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/checkgraph.o
SOURCE=cmetis.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
cmetis.o
cmetis.c: In function ‘METIS_PartGraphForContact’:
cmetis.c:131: 警告: value computed is not used
cmetis.c:158: 警告: value computed is not used
cmetis.c:27: 警告: unused variable ‘ii’
cmetis.c: In function ‘METIS_SetupContact0’:
cmetis.c:283: 警告: value computed is not used
cmetis.c:231: 警告: unused variable ‘cgraph’
cmetis.c:231: 警告: unused variable ‘graph’
cmetis.c:230: 警告: unused variable ‘adjwgt’
cmetis.c:229: 警告: unused variable ‘cpart’
cmetis.c:229: 警告: unused variable ‘csflag’
cmetis.c:229: 警告: unused variable ‘mcvwgt’
cmetis.c:228: 警告: unused variable ‘rnumflag’
cmetis.c:228: 警告: unused variable ‘rwgtflag’
cmetis.c:228: 警告: unused variable ‘mcnumflag’
cmetis.c:228: 警告: unused variable ‘wgtflag’
cmetis.c:228: 警告: unused variable ‘ii’
cmetis.c:228: 警告: unused variable ‘j’
cmetis.c: In function ‘METIS_SetupContact’:
cmetis.c:357: 警告: value computed is not used
cmetis.c:309: 警告: unused variable ‘cgraph’
cmetis.c:309: 警告: unused variable ‘graph’
cmetis.c:308: 警告: unused variable ‘adjwgt’
cmetis.c:307: 警告: unused variable ‘cpart’
cmetis.c:307: 警告: unused variable ‘csflag’
cmetis.c:307: 警告: unused variable ‘mcvwgt’
cmetis.c:306: 警告: unused variable ‘rnumflag’
cmetis.c:306: 警告: unused variable ‘rwgtflag’
cmetis.c:306: 警告: unused variable ‘mcnumflag’
cmetis.c:306: 警告: unused variable ‘wgtflag’
cmetis.c:306: 警告: unused variable ‘ncontacts’
cmetis.c:306: 警告: unused variable ‘ii’
cmetis.c:306: 警告: unused variable ‘j’
cmetis.c: In function ‘METIS_FindContacts’:
cmetis.c:408: 警告: value computed is not used
cmetis.c: In function ‘InduceDecissionTree’:
cmetis.c:601: 警告: value computed is not used
cmetis.c:511: 警告: unused variable ‘nsvtxs’
cmetis.c:511: 警告: unused variable ‘cleanmarked’
cmetis.c: In function ‘BuildDTLeafContents’:
cmetis.c:761: 警告: unused variable ‘k’
cmetis.c:761: 警告: unused variable ‘j’
cmetis.c: In function ‘FindBoxContacts’:
cmetis.c:848: 警告: unused variable ‘l’
cmetis.c: In function ‘CheckDTree’:
cmetis.c:914: 警告: unused variable ‘k’
cmetis.c:914: 警告: unused variable ‘j’
cmetis.c: In function ‘CheckDTreeSurface’:
cmetis.c:938: 警告: unused variable ‘k’
cmetis.c:938: 警告: unused variable ‘j’
cmetis.c: In function ‘METIS_PartSurfForContactRCB’:
cmetis.c:1002: 警告: operation on ‘nsurf’ may be undefined
cmetis.c:1026: 警告: value computed is not used
cmetis.c:971: 警告: unused variable ‘ncon’
cmetis.c:971: 警告: unused variable ‘j’
cmetis.c: In function ‘InduceRCBTree’:
cmetis.c:1051: 警告: unused variable ‘k’
cmetis.c:1051: 警告: unused variable ‘j’
SOURCE=coarsen.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
coarsen.o
SOURCE=compress.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
compress.o
compress.c: In function ‘libmetis__PruneGraph’:
compress.c:162: 警告: unused variable ‘padjwgt’
SOURCE=debug.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
debug.o
debug.c: In function ‘libmetis__CheckNodeBnd’:
debug.c:152: 警告: unused variable ‘j’
debug.c: In function ‘libmetis__CheckNodePartitionParams’:
debug.c:205: 警告: unused variable ‘l’
debug.c:205: 警告: unused variable ‘k’
SOURCE=estmem.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
estmem.o
estmem.c: In function ‘METIS_EstimateMemory’:
estmem.c:22: 警告: unused variable ‘k’
estmem.c:22: 警告: unused variable ‘j’
estmem.c:22: 警告: unused variable ‘i’
estmem.c: In function ‘libmetis__ComputeCoarseGraphSize’:
estmem.c:111: 警告: unused variable ‘nedges’
SOURCE=fm.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -I../
GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/
POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/fm.o
fm.c: In function ‘libmetis__FM_2WayEdgeRefine’:
fm.c:21: 警告: unused variable ‘me’
SOURCE=fortran.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
fortran.o
fortran.c: In function ‘libmetis__ChangeMesh2FNumbering2’:
fortran.c:127: 警告: unused variable ‘nedges’
SOURCE=frename.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
frename.o
SOURCE=graph.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
graph.o
graph.c: In function ‘libmetis__SetUpGraph’:
graph.c:22: 警告: unused variable ‘k’
graph.c: In function ‘libmetis__SetUpGraph2’:
graph.c:120: 警告: value computed is not used
graph.c: In function ‘libmetis__VolSetUpGraph’:
graph.c:146: 警告: unused variable ‘k’
graph.c: In function ‘libmetis__IsConnected2’:
graph.c:369: 警告: unused variable ‘wgt’
graph.c: In function ‘libmetis__FindComponents’:
graph.c:432: 警告: unused variable ‘wgt’
SOURCE=initpart.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
initpart.o
initpart.c: In function ‘libmetis__GrowBisection’:
initpart.c:191: 警告: value computed is not used
initpart.c:198: 警告: value computed is not used
initpart.c:88: 警告: unused variable ‘gain’
initpart.c:86: 警告: unused variable ‘pass’
initpart.c:86: 警告: unused variable ‘me’
initpart.c:86: 警告: unused variable ‘mincut’
initpart.c:86: 警告: unused variable ‘icut’
initpart.c:86: 警告: unused variable ‘from’
initpart.c: In function ‘libmetis__GrowBisectionNode’:
initpart.c:330: 警告: value computed is not used
initpart.c:335: 警告: value computed is not used
initpart.c:217: 警告: unused variable ‘gain’
initpart.c:214: 警告: unused variable ‘pass’
initpart.c:214: 警告: unused variable ‘me’
initpart.c:214: 警告: unused variable ‘mincut’
initpart.c:214: 警告: unused variable ‘icut’
initpart.c:214: 警告: unused variable ‘from’
initpart.c: In function ‘libmetis__RandomBisection’:
initpart.c:410: 警告: value computed is not used
initpart.c:417: 警告: value computed is not used
initpart.c:351: 警告: unused variable ‘pass’
initpart.c:351: 警告: unused variable ‘me’
initpart.c:351: 警告: unused variable ‘mincut’
initpart.c:351: 警告: unused variable ‘icut’
initpart.c:350: 警告: unused variable ‘from’
initpart.c:350: 警告: unused variable ‘k’
initpart.c:350: 警告: unused variable ‘j’
initpart.c:350: 警告: ‘bestcut’ may be used uninitialized in this
function
initpart.c: In function ‘libmetis__GrowBisection’:
initpart.c:86: 警告: ‘bestcut’ may be used uninitialized in this
function
initpart.c: In function ‘libmetis__GrowBisectionNode’:
initpart.c:214: 警告: ‘bestcut’ may be used uninitialized in this
function
SOURCE=kmetis.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
kmetis.o
kmetis.c: In function ‘METIS_WPartGraphKway’:
kmetis.c:45: 警告: unused variable ‘j’
kmetis.c:45: 警告: unused variable ‘i’
kmetis.c: In function ‘libmetis__MlevelKWayPartitioning’:
kmetis.c:120: 警告: value computed is not used
kmetis.c:94: 警告: unused variable ‘tpwgts2’
kmetis.c:94: 警告: unused variable ‘tvwgt’
kmetis.c:94: 警告: unused variable ‘nvtxs’
kmetis.c:94: 警告: unused variable ‘j’
kmetis.c:94: 警告: unused variable ‘i’
SOURCE=kvmetis.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
kvmetis.o
kvmetis.c: In function ‘METIS_WPartGraphVKway’:
kvmetis.c:47: 警告: unused variable ‘j’
kvmetis.c:47: 警告: unused variable ‘i’
kvmetis.c: In function ‘libmetis__MlevelVolKWayPartitioning’:
kvmetis.c:123: 警告: value computed is not used
kvmetis.c:97: 警告: unused variable ‘tpwgts2’
kvmetis.c:97: 警告: unused variable ‘tvwgt’
kvmetis.c:97: 警告: unused variable ‘nvtxs’
kvmetis.c:97: 警告: unused variable ‘j’
kvmetis.c:97: 警告: unused variable ‘i’
SOURCE=kwayfm.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
kwayfm.o
kwayfm.c: In function ‘libmetis__Random_KWayEdgeRefine’:
kwayfm.c:21: 警告: unused variable ‘l’
kwayfm.c:21: 警告: unused variable ‘jj’
kwayfm.c: In function ‘libmetis__Greedy_KWayEdgeRefine’:
kwayfm.c:224: 警告: unused variable ‘l’
kwayfm.c:224: 警告: unused variable ‘jj’
kwayfm.c: In function ‘libmetis__Greedy_KWayEdgeBalance’:
kwayfm.c:454: 警告: unused variable ‘l’
kwayfm.c:454: 警告: unused variable ‘jj’
kwayfm.c:454: 警告: unused variable ‘iii’
SOURCE=kwayrefine.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../
include -I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/kwayrefine.o
kwayrefine.c: In function ‘libmetis__ComputeKWayPartitionParams’:
kwayrefine.c:231: 警告: unused variable ‘l’
kwayrefine.c: In function ‘libmetis__ProjectKWayPartition’:
kwayrefine.c:398: 警告: value computed is not used
kwayrefine.c: In function ‘libmetis__IsBalanced’:
kwayrefine.c:419: 警告: unused variable ‘j’
SOURCE=kwayvolfm.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include
-I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
kwayvolfm.o
kwayvolfm.c: In function ‘libmetis__Random_KWayVolRefine’:
kwayvolfm.c:23: 警告: unused variable ‘me’
kwayvolfm.c:22: 警告: unused variable ‘u’
kwayvolfm.c:22: 警告: unused variable ‘l’
kwayvolfm.c:22: 警告: unused variable ‘kk’
kwayvolfm.c:22: 警告: unused variable ‘jj’
kwayvolfm.c: In function ‘libmetis__Random_KWayVolRefineMConn’:
kwayvolfm.c:166: 警告: unused variable ‘u’
kwayvolfm.c:166: 警告: unused variable ‘kk’
kwayvolfm.c:166: 警告: unused variable ‘jj’
kwayvolfm.c: In function ‘libmetis__Greedy_KWayVolBalance’:
kwayvolfm.c:406: 警告: unused variable ‘gain’
kwayvolfm.c:406: 警告: unused variable ‘me’
kwayvolfm.c:405: 警告: unused variable ‘u’
kwayvolfm.c:405: 警告: unused variable ‘l’
kwayvolfm.c:405: 警告: unused variable ‘kk’
kwayvolfm.c:405: 警告: unused variable ‘jj’
kwayvolfm.c:405: 警告: unused variable ‘iii’
kwayvolfm.c: In function ‘libmetis__Greedy_KWayVolBalanceMConn’:
kwayvolfm.c:560: 警告: unused variable ‘gain’
kwayvolfm.c:559: 警告: unused variable ‘u’
kwayvolfm.c:559: 警告: unused variable ‘kk’
kwayvolfm.c:559: 警告: unused variable ‘jj’
kwayvolfm.c:559: 警告: unused variable ‘iii’
kwayvolfm.c: In function ‘libmetis__KWayVolUpdate’:
kwayvolfm.c:808: 警告: unused variable ‘l’
kwayvolfm.c:808: 警告: unused variable ‘iii’
kwayvolfm.c: In function ‘libmetis__ComputeKWayVolume’:
kwayvolfm.c:1163: 警告: suggest parentheses around + or - inside shift
kwayvolfm.c:1091: 警告: unused variable ‘pid’
kwayvolfm.c:1091: 警告: unused variable ‘l’
kwayvolfm.c: In function ‘libmetis__ComputeVolume’:
kwayvolfm.c:1182: 警告: unused variable ‘me’
kwayvolfm.c: In function ‘libmetis__CheckVolKWayPartitionParams’:
kwayvolfm.c:1222: 警告: unused variable ‘bndptr’
kwayvolfm.c:1222: 警告: unused variable ‘bndind’
kwayvolfm.c:1222: 警告: unused variable ‘pwgts’
kwayvolfm.c:1221: 警告: unused variable ‘minvol’
kwayvolfm.c:1221: 警告: unused variable ‘mincut’
kwayvolfm.c:1221: 警告: unused variable ‘nbnd’
kwayvolfm.c:1221: 警告: unused variable ‘l’
kwayvolfm.c: In function ‘EliminateVolComponents’:
kwayvolfm.c:1616: 警告: ‘me’ may be used uninitialized in this function
SOURCE=kwayvolrefine.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../
include -I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/kwayvolrefine.o
kwayvolrefine.c: In function
‘libmetis__ComputeVolKWayPartitionParams’:
kwayvolrefine.c:130: 警告: unused variable ‘oedegrees’
kwayvolrefine.c:129: 警告: unused variable ‘orinfo’
kwayvolrefine.c:127: 警告: unused variable ‘pid’
kwayvolrefine.c:127: 警告: unused variable ‘minvol’
kwayvolrefine.c:127: 警告: unused variable ‘nbnd’
kwayvolrefine.c:127: 警告: unused variable ‘l’
kwayvolrefine.c:127: 警告: unused variable ‘kk’
kwayvolrefine.c:127: 警告: unused variable ‘ii’
kwayvolrefine.c: In function ‘libmetis__ComputeKWayVolGains’:
kwayvolrefine.c:231: 警告: suggest parentheses around + or - inside
shift
kwayvolrefine.c:207: 警告: unused variable ‘pid’
kwayvolrefine.c:207: 警告: unused variable ‘l’
kwayvolrefine.c: In function ‘libmetis__ProjectVolKWayPartition’:
kwayvolrefine.c:395: 警告: value computed is not used
SOURCE=match.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
match.o
SOURCE=mbalance2.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include
-I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
mbalance2.o
mbalance2.c: In function ‘libmetis__MocBalance2Way2’:
mbalance2.c:24: 警告: unused variable ‘i’
mbalance2.c: In function ‘libmetis__MocGeneral2WayBalance2’:
mbalance2.c:39: 警告: unused variable ‘me’
mbalance2.c:39: 警告: unused variable ‘pass’
SOURCE=mbalance.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
mbalance.o
mbalance.c: In function ‘libmetis__MocGeneral2WayBalance’:
mbalance.c:38: 警告: unused variable ‘me’
mbalance.c:38: 警告: unused variable ‘pass’
SOURCE=mcoarsen.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
mcoarsen.o
SOURCE=memory.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
memory.o
memory.c: In function ‘AllocGraphFields’:
memory.c:229: 警告: unused variable ‘eptr’
memory.c:229: 警告: unused variable ‘sptr’
SOURCE=mesh.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -I../
GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/
POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/mesh.o
mesh.c: In function ‘METIS_MixedMeshToDualCount’:
mesh.c:77: 警告: 初期化子のまわりのブレースを欠いています
mesh.c:77: 警告: (near initialization for ‘mgcnum[0]’)
mesh.c:73: 警告: unused variable ‘mgcnums’
mesh.c:69: 警告: unused variable ‘nedges’
mesh.c: In function ‘METIS_MixedMeshToDual’:
mesh.c:210: 警告: 初期化子のまわりのブレースを欠いています
mesh.c:210: 警告: (near initialization for ‘mgcnum[0]’)
mesh.c:206: 警告: unused variable ‘mgcnums’
mesh.c:202: 警告: unused variable ‘nedges’
mesh.c: In function ‘METIS_MixedMeshToNodal’:
mesh.c:386: 警告: 初期化子のまわりのブレースを欠いています
mesh.c:386: 警告: (near initialization for ‘tableH[0]’)
mesh.c:395: 警告: 初期化子のまわりのブレースを欠いています
mesh.c:395: 警告: (near initialization for ‘tableQ[0]’)
mesh.c:382: 警告: unused variable ‘n’
mesh.c:382: 警告: unused variable ‘kkk’
mesh.c: In function ‘GENDUALMETIS_COUNT’:
mesh.c:564: 警告: unused variable ‘nedges’
mesh.c: In function ‘GENDUALMETIS’:
mesh.c:649: 警告: unused variable ‘nedges’
mesh.c: In function ‘libmetis__TRINODALMETIS’:
mesh.c:750: 警告: unused variable ‘n’
mesh.c:750: 警告: unused variable ‘m’
mesh.c:750: 警告: unused variable ‘l’
mesh.c:750: 警告: unused variable ‘kkk’
mesh.c: In function ‘libmetis__TETNODALMETIS’:
mesh.c:799: 警告: unused variable ‘n’
mesh.c:799: 警告: unused variable ‘m’
mesh.c:799: 警告: unused variable ‘l’
mesh.c:799: 警告: unused variable ‘kkk’
mesh.c: In function ‘libmetis__HEXNODALMETIS’:
mesh.c:851: 警告: 初期化子のまわりのブレースを欠いています
mesh.c:851: 警告: (near initialization for ‘table[0]’)
mesh.c:848: 警告: unused variable ‘n’
mesh.c:848: 警告: unused variable ‘m’
mesh.c:848: 警告: unused variable ‘l’
mesh.c:848: 警告: unused variable ‘kkk’
mesh.c: In function ‘QUADNODALMETIS’:
mesh.c:924: 警告: 初期化子のまわりのブレースを欠いています
mesh.c:924: 警告: (near initialization for ‘table[0]’)
mesh.c:921: 警告: unused variable ‘n’
mesh.c:921: 警告: unused variable ‘m’
mesh.c:921: 警告: unused variable ‘l’
mesh.c:921: 警告: unused variable ‘kkk’
mesh.c: In function ‘LINENODALMETIS’:
mesh.c:986: 警告: unused variable ‘n’
mesh.c:986: 警告: unused variable ‘m’
mesh.c:986: 警告: unused variable ‘l’
mesh.c:986: 警告: unused variable ‘kkk’
SOURCE=meshpart.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
meshpart.o
meshpart.c: In function ‘METIS_PartMixedMeshNodal’:
meshpart.c:121: 警告: unused variable ‘esize’
meshpart.c: In function ‘METIS_PartMixedMeshDual’:
meshpart.c:427: 警告: ‘esize’ may be used uninitialized in this
function
SOURCE=mfm2.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -I../
GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/
POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/mfm2.o
mfm2.c: In function ‘libmetis__MocFM_2WayEdgeRefine2’:
mfm2.c:23: 警告: unused variable ‘me’
mfm2.c: In function ‘libmetis__IsBetter2wayBalance’:
mfm2.c:328: 警告: unused variable ‘j’
mfm2.c: In function ‘libmetis__SelectQueue2’:
mfm2.c:267: 警告: ‘max’ may be used uninitialized in this function
SOURCE=mfm.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -I../
GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/
POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/mfm.o
mfm.c: In function ‘libmetis__MocFM_2WayEdgeRefine’:
mfm.c:22: 警告: unused variable ‘me’
mfm.c: In function ‘libmetis__SelectQueue’:
mfm.c:241: 警告: ‘max’ may be used uninitialized in this function
SOURCE=mincover.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
mincover.o
SOURCE=minitpart2.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../
include -I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/minitpart2.o
minitpart2.c: In function ‘libmetis__MocGrowBisection2’:
minitpart2.c:85: 警告: value computed is not used
minitpart2.c:92: 警告: value computed is not used
minitpart2.c:59: 警告: unused variable ‘mincut’
minitpart2.c:59: 警告: unused variable ‘from’
minitpart2.c:59: 警告: unused variable ‘ncon’
minitpart2.c:59: 警告: unused variable ‘k’
minitpart2.c:59: 警告: unused variable ‘j’
minitpart2.c:59: 警告: unused variable ‘i’
minitpart2.c: In function ‘libmetis__MocGrowBisectionNew2’:
minitpart2.c:132: 警告: value computed is not used
minitpart2.c:139: 警告: value computed is not used
minitpart2.c:109: 警告: unused variable ‘mincut’
minitpart2.c:109: 警告: unused variable ‘from’
minitpart2.c:109: 警告: unused variable ‘ncon’
minitpart2.c:109: 警告: unused variable ‘k’
minitpart2.c:109: 警告: unused variable ‘j’
minitpart2.c:109: 警告: unused variable ‘i’
minitpart2.c: In function ‘libmetis__MocInit2WayBalance2’:
minitpart2.c:156: 警告: unused variable ‘me’
minitpart2.c:156: 警告: unused variable ‘pass’
minitpart2.c: In function ‘libmetis__SelectQueueOneWay2’:
minitpart2.c:330: 警告: ‘imax’ may be used uninitialized in this
function
minitpart2.c: In function ‘libmetis__MocGrowBisectionNew2’:
minitpart2.c:109: 警告: ‘bestcut’ may be used uninitialized in this
function
minitpart2.c: In function ‘libmetis__MocGrowBisection2’:
minitpart2.c:59: 警告: ‘bestcut’ may be used uninitialized in this
function
SOURCE=minitpart.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include
-I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
minitpart.o
minitpart.c: In function ‘libmetis__MocInit2WayPartition’:
minitpart.c:23: 警告: unused variable ‘i’
minitpart.c: In function ‘libmetis__MocGrowBisection’:
minitpart.c:88: 警告: value computed is not used
minitpart.c:95: 警告: value computed is not used
minitpart.c:62: 警告: unused variable ‘mincut’
minitpart.c:62: 警告: unused variable ‘from’
minitpart.c:62: 警告: unused variable ‘ncon’
minitpart.c:62: 警告: unused variable ‘k’
minitpart.c:62: 警告: unused variable ‘j’
minitpart.c:62: 警告: unused variable ‘i’
minitpart.c: In function ‘libmetis__MocRandomBisection’:
minitpart.c:156: 警告: value computed is not used
minitpart.c:163: 警告: value computed is not used
minitpart.c:109: 警告: unused variable ‘mincut’
minitpart.c:109: 警告: unused variable ‘from’
minitpart.c:109: 警告: unused variable ‘k’
minitpart.c:109: 警告: unused variable ‘j’
minitpart.c: In function ‘libmetis__MocInit2WayBalance’:
minitpart.c:181: 警告: unused variable ‘me’
minitpart.c:181: 警告: unused variable ‘pass’
minitpart.c: In function ‘libmetis__MocRandomBisection’:
minitpart.c:109: 警告: ‘bestcut’ may be used uninitialized in this
function
minitpart.c: In function ‘libmetis__MocGrowBisection’:
minitpart.c:62: 警告: ‘bestcut’ may be used uninitialized in this
function
SOURCE=mkmetis.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
mkmetis.o
mkmetis.c: In function ‘METIS_mCPartGraphKway’:
mkmetis.c:28: 警告: unused variable ‘j’
mkmetis.c:28: 警告: unused variable ‘i’
mkmetis.c: In function ‘libmetis__MCMlevelKWayPartitioning’:
mkmetis.c:116: 警告: value computed is not used
mkmetis.c:79: 警告: unused variable ‘nvtxs’
mkmetis.c:79: 警告: unused variable ‘j’
SOURCE=mkwayfmh.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
mkwayfmh.o
mkwayfmh.c: In function
‘libmetis__MCRandom_KWayEdgeRefineHorizontal’:
mkwayfmh.c:23: 警告: unused variable ‘l’
mkwayfmh.c:23: 警告: unused variable ‘jj’
mkwayfmh.c: In function
‘libmetis__MCGreedy_KWayEdgeBalanceHorizontal’:
mkwayfmh.c:260: 警告: unused variable ‘l’
mkwayfmh.c:260: 警告: unused variable ‘jj’
mkwayfmh.c:260: 警告: unused variable ‘iii’
mkwayfmh.c: In function ‘libmetis__IsHBalanceBetterFT’:
mkwayfmh.c:595: 警告: unused variable ‘k’
mkwayfmh.c:595: 警告: unused variable ‘j’
SOURCE=mkwayrefine.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../
include -I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/mkwayrefine.o
mkwayrefine.c: In function ‘libmetis__MocComputeKWayPartitionParams’:
mkwayrefine.c:89: 警告: unused variable ‘l’
mkwayrefine.c: In function ‘libmetis__MocProjectKWayPartition’:
mkwayrefine.c:258: 警告: value computed is not used
SOURCE=mmatch.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
mmatch.o
mmatch.c: In function ‘libmetis__MCMatch_HEM’:
mmatch.c:81: 警告: unused variable ‘l’
SOURCE=mmd.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -I../
GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/
POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/mmd.o
SOURCE=mpmetis.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
mpmetis.o
mpmetis.c: In function ‘METIS_mCPartGraphRecursive’:
mpmetis.c:28: 警告: unused variable ‘j’
mpmetis.c:28: 警告: unused variable ‘i’
mpmetis.c: In function ‘METIS_mCHPartGraphRecursive’:
mpmetis.c:110: 警告: value computed is not used
mpmetis.c:82: 警告: unused variable ‘j’
mpmetis.c:82: 警告: unused variable ‘i’
mpmetis.c: In function ‘METIS_mCPartGraphRecursiveInternal’:
mpmetis.c:140: 警告: unused variable ‘j’
mpmetis.c:140: 警告: unused variable ‘i’
mpmetis.c: In function ‘METIS_mCHPartGraphRecursiveInternal’:
mpmetis.c:213: 警告: value computed is not used
mpmetis.c:188: 警告: unused variable ‘j’
mpmetis.c:188: 警告: unused variable ‘i’
mpmetis.c: In function ‘libmetis__MCMlevelRecursiveBisection’:
mpmetis.c:241: 警告: unused variable ‘ncon’
mpmetis.c:241: 警告: unused variable ‘j’
mpmetis.c: In function ‘libmetis__MCHMlevelRecursiveBisection’:
mpmetis.c:293: 警告: unused variable ‘j’
mpmetis.c: In function ‘libmetis__MCHMlevelEdgeBisection’:
mpmetis.c:385: 警告: unused variable ‘i’
SOURCE=mrefine2.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
mrefine2.o
SOURCE=mrefine.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
mrefine.o
mrefine.c: In function ‘libmetis__MocCompute2WayPartitionParams’:
mrefine.c:96: 警告: unused variable ‘other’
mrefine.c:91: 警告: unused variable ‘l’
mrefine.c:91: 警告: unused variable ‘k’
mrefine.c: In function ‘libmetis__MocProject2WayPartition’:
mrefine.c:211: 警告: value computed is not used
SOURCE=mrkmetis.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
mrkmetis.o
mrkmetis.c: In function ‘METIS_mCRefineGraphKway’:
mrkmetis.c:28: 警告: unused variable ‘j’
mrkmetis.c:28: 警告: unused variable ‘i’
mrkmetis.c: In function ‘MCMlevelKWayRefinement’:
mrkmetis.c:95: 警告: value computed is not used
mrkmetis.c:80: 警告: unused variable ‘edgecut’
mrkmetis.c:80: 警告: unused variable ‘options’
mrkmetis.c:78: 警告: unused variable ‘nvtxs’
mrkmetis.c:78: 警告: unused variable ‘j’
SOURCE=mutil.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
mutil.o
SOURCE=myqsort.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
myqsort.o
SOURCE=ometis.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
ometis.o
ometis.c: In function ‘METIS_EdgeND’:
ometis.c:25: 警告: unused variable ‘j’
ometis.c: In function ‘METIS_NodeND’:
ometis.c:163: 警告: value computed is not used
ometis.c:82: 警告: unused variable ‘nflag’
ometis.c:82: 警告: unused variable ‘wflag’
ometis.c: In function ‘METIS_NodeWND’:
ometis.c:207: 警告: unused variable ‘tvwgt’
ometis.c:207: 警告: unused variable ‘j’
ometis.c: In function ‘libmetis__MlevelNestedDissection’:
ometis.c:265: 警告: unused variable ‘j’
ometis.c: In function ‘libmetis__MlevelNestedDissectionCC’:
ometis.c:325: 警告: unused variable ‘j’
ometis.c: In function ‘libmetis__MlevelNodeBisectionMultiple’:
ometis.c:409: 警告: value computed is not used
ometis.c:420: 警告: value computed is not used
ometis.c:442: 警告: value computed is not used
ometis.c:453: 警告: value computed is not used
ometis.c:388: 警告: unused variable ‘tmp’
ometis.c: In function ‘libmetis__SplitGraphOrder’:
ometis.c:512: 警告: unused variable ‘auxadjwgt’
ometis.c: In function ‘libmetis__MMDOrder’:
ometis.c:639: 警告: suggest parentheses around + or - inside shift
ometis.c:617: 警告: unused variable ‘j’
ometis.c: In function ‘libmetis__SplitGraphOrderCC’:
ometis.c:663: 警告: unused variable ‘mypart’
ometis.c: In function ‘libmetis__MlevelNodeBisectionMultiple’:
ometis.c:388: 警告: ‘mincut’ may be used uninitialized in this function
SOURCE=parmetis.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
parmetis.o
parmetis.c: In function ‘METIS_WPartGraphKway2’:
parmetis.c:48: 警告: unused variable ‘j’
parmetis.c:48: 警告: unused variable ‘i’
parmetis.c: In function ‘METIS_NodeNDP’:
parmetis.c:98: 警告: unused variable ‘nflag’
parmetis.c:98: 警告: unused variable ‘wflag’
parmetis.c: In function ‘libmetis__MlevelNestedDissectionP’:
parmetis.c:196: 警告: unused variable ‘j’
parmetis.c: In function ‘METIS_NodeComputeSeparator’:
parmetis.c:305: 警告: value computed is not used
parmetis.c:265: 警告: unused variable ‘j’
parmetis.c:265: 警告: unused variable ‘i’
parmetis.c: In function ‘METIS_EdgeComputeSeparator’:
parmetis.c:363: 警告: value computed is not used
parmetis.c:322: 警告: unused variable ‘j’
parmetis.c:322: 警告: unused variable ‘i’
SOURCE=pmetis.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
pmetis.o
pmetis.c: In function ‘METIS_WPartGraphRecursive’:
pmetis.c:49: 警告: unused variable ‘j’
pmetis.c: In function ‘libmetis__MlevelRecursiveBisection’:
pmetis.c:107: 警告: unused variable ‘j’
SOURCE=pqueue.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
pqueue.o
pqueue.c: In function ‘libmetis__PQueueInsert’:
pqueue.c:139: 警告: unused variable ‘k’
pqueue.c: In function ‘libmetis__PQueueUpdate’:
pqueue.c:296: 警告: unused variable ‘newnode’
SOURCE=refine.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
refine.o
refine.c: In function ‘libmetis__Compute2WayPartitionParams’:
refine.c:83: 警告: unused variable ‘other’
refine.c:79: 警告: unused variable ‘l’
refine.c:79: 警告: unused variable ‘k’
refine.c: In function ‘libmetis__Project2WayPartition’:
refine.c:198: 警告: value computed is not used
SOURCE=rkmetis.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
rkmetis.o
rkmetis.c: In function ‘METIS_WRefineGraphKway’:
rkmetis.c:47: 警告: unused variable ‘j’
rkmetis.c:47: 警告: unused variable ‘i’
rkmetis.c: In function ‘MlevelKWayRefinement’:
rkmetis.c:115: 警告: value computed is not used
rkmetis.c:100: 警告: unused variable ‘edgecut’
rkmetis.c:100: 警告: unused variable ‘options’
rkmetis.c:100: 警告: unused variable ‘numflag’
rkmetis.c:100: 警告: unused variable ‘wgtflag’
rkmetis.c:98: 警告: unused variable ‘tpwgts2’
rkmetis.c:98: 警告: unused variable ‘tvwgt’
rkmetis.c:98: 警告: unused variable ‘nvtxs’
rkmetis.c:98: 警告: unused variable ‘j’
SOURCE=separator.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include
-I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
separator.o
separator.c: In function ‘libmetis__ConstructSeparator’:
separator.c:43: 警告: value computed is not used
separator.c:23: 警告: unused variable ‘k’
separator.c: In function ‘libmetis__ConstructMinCoverSeparator’:
separator.c:270: 警告: value computed is not used
separator.c:275: 警告: value computed is not used
SOURCE=sfm.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -I../
GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/
POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/sfm.o
sfm.c: In function ‘libmetis__FM_2WayNodeBalance’:
sfm.c:926: 警告: unused variable ‘pass’
SOURCE=srefine.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
srefine.o
srefine.c: In function ‘libmetis__Compute2WayNodePartitionParams’:
srefine.c:88: 警告: unused variable ‘l’
srefine.c:88: 警告: unused variable ‘k’
srefine.c: In function ‘libmetis__Project2WayNodePartition’:
srefine.c:143: 警告: unused variable ‘j’
SOURCE=stat.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -I../
GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/
POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/stat.o
stat.c: In function ‘libmetis__ComputePartitionInfo’:
stat.c:23: 警告: unused variable ‘k’
stat.c: In function ‘ComputePartitionInfoBipartite’:
stat.c:133: 警告: unused variable ‘tmpptr’
stat.c:132: 警告: unused variable ‘k’
stat.c: In function ‘libmetis__ComputePartitionBalance’:
stat.c:239: 警告: unused variable ‘balance’
stat.c: In function ‘Moc_ComputePartitionBalance’:
stat.c:298: 警告: unused variable ‘balance’
SOURCE=streamio.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
streamio.o
SOURCE=subdomains.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../
include -I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOpt/subdomains.o
subdomains.c: In function ‘libmetis__Random_KWayEdgeRefineMConn’:
subdomains.c:24: 警告: unused variable ‘jj’
subdomains.c: In function ‘libmetis__Greedy_KWayEdgeBalanceMConn’:
subdomains.c:314: 警告: unused variable ‘jj’
subdomains.c:314: 警告: unused variable ‘iii’
subdomains.c: In function ‘libmetis__MoveGroupMConn’:
subdomains.c:895: 警告: unused variable ‘myndegrees’
subdomains.c:895: 警告: unused variable ‘l’
subdomains.c:895: 警告: unused variable ‘jj’
subdomains.c: In function ‘libmetis__EliminateComponents’:
subdomains.c:1050: 警告: unused variable ‘other’
subdomains.c: In function ‘libmetis__MoveGroup’:
subdomains.c:1176: 警告: unused variable ‘myndegrees’
subdomains.c:1176: 警告: unused variable ‘l’
subdomains.c:1176: 警告: unused variable ‘jj’
subdomains.c: In function ‘libmetis__EliminateComponents’:
subdomains.c:1050: 警告: ‘me’ may be used uninitialized in this
function
SOURCE=timing.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -
I../GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/
src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/
timing.o
SOURCE=util.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../include -I../
GKlib/trunk -IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/
OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/
POSIX/lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/util.o
'/home/ktech/OpenFOAM/OpenFOAM-1.6/lib/linuxGccDPOpt/libmetis.so' is
up to date.
+ [ OPENMPI = MPI -o -d /home/ktech/OpenFOAM/ThirdParty-1.6/
openmpi-1.3.3/platforms/linuxGccDPOpt ]
+ cd ParMetis-3.1
+ WM_OPTIONS=linuxGccDPOptOPENMPI
+ wmake libso METISLib
Making dependency list for source file coarsen.c
Making dependency list for source file fm.c
Making dependency list for source file initpart.c
Making dependency list for source file match.c
Making dependency list for source file ccgraph.c
Making dependency list for source file pmetis.c
Making dependency list for source file pqueue.c
Making dependency list for source file refine.c
Making dependency list for source file util.c
Making dependency list for source file timing.c
Making dependency list for source file debug.c
Making dependency list for source file bucketsort.c
Making dependency list for source file graph.c
Making dependency list for source file stat.c
Making dependency list for source file kmetis.c
Making dependency list for source file kwayrefine.c
Making dependency list for source file kwayfm.c
Making dependency list for source file balance.c
Making dependency list for source file ometis.c
Making dependency list for source file srefine.c
Making dependency list for source file sfm.c
Making dependency list for source file separator.c
Making dependency list for source file mincover.c
Making dependency list for source file mmd.c
Making dependency list for source file mesh.c
Making dependency list for source file meshpart.c
Making dependency list for source file frename.c
Making dependency list for source file fortran.c
Making dependency list for source file myqsort.c
Making dependency list for source file compress.c
Making dependency list for source file parmetis.c
Making dependency list for source file estmem.c
Making dependency list for source file mpmetis.c
Making dependency list for source file mcoarsen.c
Making dependency list for source file mmatch.c
Making dependency list for source file minitpart.c
Making dependency list for source file mbalance.c
Making dependency list for source file mutil.c
Making dependency list for source file mkmetis.c
Making dependency list for source file mkwayrefine.c
Making dependency list for source file mkwayfmh.c
Making dependency list for source file mrefine2.c
Making dependency list for source file minitpart2.c
Making dependency list for source file mbalance2.c
Making dependency list for source file mfm2.c
Making dependency list for source file kvmetis.c
Making dependency list for source file kwayvolrefine.c
Making dependency list for source file kwayvolfm.c
Making dependency list for source file subdomains.c
Making dependency list for source file mfm.c
Making dependency list for source file memory.c
Making dependency list for source file mrefine.c
Making dependency list for source file checkgraph.c
SOURCE=coarsen.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/coarsen.o
SOURCE=fm.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -DOMPI_SKIP_MPICXX -
I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/platforms/
linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/fm.o
fm.c: In function ‘__FM_2WayEdgeRefine’:
fm.c:22: 警告: unused variable ‘me’
SOURCE=initpart.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/initpart.o
initpart.c: In function ‘__GrowBisection’:
initpart.c:193: 警告: value computed is not used
initpart.c:200: 警告: value computed is not used
initpart.c:202: 警告: implicit declaration of function ‘__GKfree’
initpart.c:89: 警告: unused variable ‘gain’
initpart.c:87: 警告: unused variable ‘pass’
initpart.c:87: 警告: unused variable ‘me’
initpart.c:87: 警告: unused variable ‘mincut’
initpart.c:87: 警告: unused variable ‘icut’
initpart.c:87: 警告: unused variable ‘from’
initpart.c: In function ‘__GrowBisectionNode’:
initpart.c:331: 警告: value computed is not used
initpart.c:336: 警告: value computed is not used
initpart.c:217: 警告: unused variable ‘gain’
initpart.c:215: 警告: unused variable ‘pass’
initpart.c:215: 警告: unused variable ‘me’
initpart.c:215: 警告: unused variable ‘mincut’
initpart.c:215: 警告: unused variable ‘icut’
initpart.c:215: 警告: unused variable ‘from’
initpart.c: In function ‘__RandomBisection’:
initpart.c:411: 警告: value computed is not used
initpart.c:418: 警告: value computed is not used
initpart.c:351: 警告: unused variable ‘pass’
initpart.c:351: 警告: unused variable ‘me’
initpart.c:351: 警告: unused variable ‘mincut’
initpart.c:351: 警告: unused variable ‘icut’
initpart.c:351: 警告: unused variable ‘from’
initpart.c:351: 警告: unused variable ‘k’
initpart.c:351: 警告: unused variable ‘j’
SOURCE=match.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/match.o
SOURCE=ccgraph.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/ccgraph.o
ccgraph.c: In function ‘__CreateCoarseGraph’:
ccgraph.c:81: 警告: value computed is not used
ccgraph.c:24: 警告: unused variable ‘l’
ccgraph.c: In function ‘__CreateCoarseGraphNoMask’:
ccgraph.c:249: 警告: value computed is not used
ccgraph.c: In function ‘__CreateCoarseGraph_NVW’:
ccgraph.c:332: 警告: unused variable ‘l’
ccgraph.c: In function ‘__ReAdjustMemory’:
ccgraph.c:547: 警告: value computed is not used
SOURCE=pmetis.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/pmetis.o
pmetis.c: In function ‘METIS_WPartGraphRecursive’:
pmetis.c:49: 警告: unused variable ‘j’
pmetis.c: In function ‘__MlevelRecursiveBisection’:
pmetis.c:138: 警告: implicit declaration of function ‘__GKfree’
pmetis.c:105: 警告: unused variable ‘j’
SOURCE=pqueue.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/pqueue.o
pqueue.c: In function ‘__PQueueFree’:
pqueue.c:110: 警告: implicit declaration of function ‘__GKfree’
pqueue.c: In function ‘__PQueueInsert’:
pqueue.c:140: 警告: unused variable ‘k’
pqueue.c: In function ‘__PQueueUpdate’:
pqueue.c:297: 警告: unused variable ‘newnode’
SOURCE=refine.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/refine.o
refine.c: In function ‘__Compute2WayPartitionParams’:
refine.c:83: 警告: unused variable ‘other’
refine.c:79: 警告: unused variable ‘l’
refine.c:79: 警告: unused variable ‘k’
refine.c: In function ‘__Project2WayPartition’:
refine.c:198: 警告: value computed is not used
SOURCE=util.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/util.o
SOURCE=timing.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/timing.o
SOURCE=debug.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/debug.o
debug.c: In function ‘__CheckNodeBnd’:
debug.c:119: 警告: unused variable ‘j’
debug.c: In function ‘__CheckNodePartitionParams’:
debug.c:172: 警告: unused variable ‘l’
debug.c:172: 警告: unused variable ‘k’
SOURCE=bucketsort.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/bucketsort.o
SOURCE=graph.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/graph.o
graph.c: In function ‘__SetUpGraph’:
graph.c:24: 警告: unused variable ‘k’
graph.c: In function ‘__SetUpGraph2’:
graph.c:186: 警告: value computed is not used
graph.c: In function ‘__VolSetUpGraph’:
graph.c:214: 警告: unused variable ‘k’
graph.c: In function ‘__IsConnectedSubdomain’:
graph.c:445: 警告: implicit declaration of function ‘__GKfree’
graph.c: In function ‘__IsConnected2’:
graph.c:493: 警告: unused variable ‘wgt’
graph.c: In function ‘__FindComponents’:
graph.c:556: 警告: unused variable ‘wgt’
SOURCE=stat.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/stat.o
stat.c: In function ‘__ComputePartitionInfo’:
stat.c:123: 警告: implicit declaration of function ‘__GKfree’
stat.c:23: 警告: unused variable ‘k’
stat.c: In function ‘ComputePartitionInfoBipartite’:
stat.c:133: 警告: unused variable ‘tmpptr’
stat.c:132: 警告: unused variable ‘k’
stat.c: In function ‘__ComputePartitionBalance’:
stat.c:239: 警告: unused variable ‘balance’
stat.c: In function ‘__Moc_ComputePartitionBalance’:
stat.c:297: 警告: unused variable ‘balance’
SOURCE=kmetis.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/kmetis.o
kmetis.c: In function ‘METIS_WPartGraphKway’:
kmetis.c:47: 警告: unused variable ‘j’
kmetis.c:47: 警告: unused variable ‘i’
kmetis.c: In function ‘__MlevelKWayPartitioning’:
kmetis.c:122: 警告: value computed is not used
kmetis.c:124: 警告: implicit declaration of function ‘__GKfree’
kmetis.c:96: 警告: unused variable ‘tpwgts2’
kmetis.c:96: 警告: unused variable ‘tvwgt’
kmetis.c:96: 警告: unused variable ‘nvtxs’
kmetis.c:96: 警告: unused variable ‘j’
kmetis.c:96: 警告: unused variable ‘i’
SOURCE=kwayrefine.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/kwayrefine.o
kwayrefine.c: In function ‘__RefineKWay’:
kwayrefine.c:74: 警告: implicit declaration of function ‘__GKfree’
kwayrefine.c: In function ‘__ComputeKWayPartitionParams’:
kwayrefine.c:143: 警告: unused variable ‘l’
kwayrefine.c: In function ‘__ProjectKWayPartition’:
kwayrefine.c:310: 警告: value computed is not used
kwayrefine.c: In function ‘__IsBalanced’:
kwayrefine.c:331: 警告: unused variable ‘j’
SOURCE=kwayfm.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/kwayfm.o
kwayfm.c: In function ‘__Random_KWayEdgeRefine’:
kwayfm.c:21: 警告: unused variable ‘l’
kwayfm.c:21: 警告: unused variable ‘jj’
kwayfm.c: In function ‘__Greedy_KWayEdgeRefine’:
kwayfm.c:224: 警告: unused variable ‘l’
kwayfm.c:224: 警告: unused variable ‘jj’
kwayfm.c: In function ‘__Greedy_KWayEdgeBalance’:
kwayfm.c:454: 警告: unused variable ‘l’
kwayfm.c:454: 警告: unused variable ‘jj’
kwayfm.c:454: 警告: unused variable ‘iii’
SOURCE=balance.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/balance.o
balance.c: In function ‘__Balance2Way’:
balance.c:24: 警告: unused variable ‘ed’
balance.c:24: 警告: unused variable ‘id’
balance.c:23: 警告: unused variable ‘gain’
balance.c:23: 警告: unused variable ‘imax’
balance.c:23: 警告: unused variable ‘from’
balance.c:23: 警告: unused variable ‘nvtxs’
balance.c:23: 警告: unused variable ‘j’
balance.c:23: 警告: unused variable ‘i’
balance.c: In function ‘__Bnd2WayBalance’:
balance.c:50: 警告: unused variable ‘me’
balance.c:50: 警告: unused variable ‘pass’
balance.c: In function ‘__General2WayBalance’:
balance.c:176: 警告: unused variable ‘me’
balance.c:176: 警告: unused variable ‘pass’
SOURCE=ometis.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/ometis.o
ometis.c: In function ‘METIS_EdgeND’:
ometis.c:25: 警告: unused variable ‘j’
ometis.c: In function ‘METIS_NodeND’:
ometis.c:138: 警告: implicit declaration of function ‘__GKfree’
ometis.c:163: 警告: value computed is not used
ometis.c:82: 警告: unused variable ‘nflag’
ometis.c:82: 警告: unused variable ‘wflag’
ometis.c: In function ‘METIS_NodeWND’:
ometis.c:207: 警告: unused variable ‘tvwgt’
ometis.c:207: 警告: unused variable ‘j’
ometis.c: In function ‘__MlevelNestedDissection’:
ometis.c:265: 警告: unused variable ‘j’
ometis.c: In function ‘__MlevelNestedDissectionCC’:
ometis.c:325: 警告: unused variable ‘j’
ometis.c: In function ‘__MlevelNodeBisectionMultiple’:
ometis.c:410: 警告: value computed is not used
ometis.c:421: 警告: value computed is not used
ometis.c:444: 警告: value computed is not used
ometis.c:455: 警告: value computed is not used
ometis.c:388: 警告: unused variable ‘tmp’
ometis.c: In function ‘__SplitGraphOrder’:
ometis.c:514: 警告: unused variable ‘auxadjwgt’
ometis.c: In function ‘__MMDOrder’:
ometis.c:641: 警告: suggest parentheses around + or - inside shift
ometis.c:619: 警告: unused variable ‘j’
ometis.c: In function ‘__SplitGraphOrderCC’:
ometis.c:665: 警告: unused variable ‘mypart’
SOURCE=srefine.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/srefine.o
srefine.c: In function ‘__Compute2WayNodePartitionParams’:
srefine.c:91: 警告: unused variable ‘l’
srefine.c:91: 警告: unused variable ‘k’
srefine.c: In function ‘__Project2WayNodePartition’:
srefine.c:146: 警告: unused variable ‘j’
SOURCE=sfm.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -DOMPI_SKIP_MPICXX
-I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/platforms/
linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/sfm.o
sfm.c: In function ‘__FM_2WayNodeBalance’:
sfm.c:926: 警告: unused variable ‘pass’
SOURCE=separator.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/separator.o
separator.c: In function ‘__ConstructSeparator’:
separator.c:40: 警告: implicit declaration of function ‘__GKfree’
separator.c:42: 警告: value computed is not used
separator.c:23: 警告: unused variable ‘k’
separator.c: In function ‘__ConstructMinCoverSeparator’:
separator.c:269: 警告: value computed is not used
separator.c:273: 警告: value computed is not used
SOURCE=mincover.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/mincover.o
mincover.c: In function ‘__MinCover’:
mincover.c:118: 警告: implicit declaration of function ‘__GKfree’
SOURCE=mmd.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -DOMPI_SKIP_MPICXX
-I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/platforms/
linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/mmd.o
SOURCE=mesh.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/mesh.o
mesh.c: In function ‘GENDUALMETIS’:
mesh.c:77: 警告: unused variable ‘nedges’
mesh.c: In function ‘__TRINODALMETIS’:
mesh.c:172: 警告: unused variable ‘n’
mesh.c:172: 警告: unused variable ‘m’
mesh.c:172: 警告: unused variable ‘l’
mesh.c:172: 警告: unused variable ‘kkk’
mesh.c: In function ‘__TETNODALMETIS’:
mesh.c:221: 警告: unused variable ‘n’
mesh.c:221: 警告: unused variable ‘m’
mesh.c:221: 警告: unused variable ‘l’
mesh.c:221: 警告: unused variable ‘kkk’
mesh.c: In function ‘__HEXNODALMETIS’:
mesh.c:273: 警告: 初期化子のまわりのブレースを欠いています
mesh.c:273: 警告: (near initialization for ‘table[0]’)
mesh.c:270: 警告: unused variable ‘n’
mesh.c:270: 警告: unused variable ‘m’
mesh.c:270: 警告: unused variable ‘l’
mesh.c:270: 警告: unused variable ‘kkk’
mesh.c: In function ‘QUADNODALMETIS’:
mesh.c:346: 警告: 初期化子のまわりのブレースを欠いています
mesh.c:346: 警告: (near initialization for ‘table[0]’)
mesh.c:343: 警告: unused variable ‘n’
mesh.c:343: 警告: unused variable ‘m’
mesh.c:343: 警告: unused variable ‘l’
mesh.c:343: 警告: unused variable ‘kkk’
SOURCE=meshpart.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/meshpart.o
meshpart.c: In function ‘METIS_PartMeshNodal’:
meshpart.c:101: 警告: implicit declaration of function ‘__GKfree’
SOURCE=frename.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/frename.o
SOURCE=fortran.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/fortran.o
fortran.c: In function ‘__ChangeMesh2FNumbering2’:
fortran.c:129: 警告: unused variable ‘nedges’
SOURCE=myqsort.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/myqsort.o
myqsort.c: In function ‘siqst’:
myqsort.c:83: 警告: unused variable ‘ii’
myqsort.c: In function ‘iiqst’:
myqsort.c:213: 警告: unused variable ‘ii’
SOURCE=compress.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/compress.o
compress.c: In function ‘__CompressGraph’:
compress.c:151: 警告: implicit declaration of function ‘__GKfree’
compress.c: In function ‘__PruneGraph’:
compress.c:163: 警告: unused variable ‘pvwgt’
compress.c:163: 警告: unused variable ‘padjwgt’
SOURCE=parmetis.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/parmetis.o
parmetis.c: In function ‘METIS_WPartGraphKway2’:
parmetis.c:48: 警告: unused variable ‘j’
parmetis.c:48: 警告: unused variable ‘i’
parmetis.c: In function ‘METIS_NodeNDP’:
parmetis.c:143: 警告: implicit declaration of function ‘__GKfree’
parmetis.c:98: 警告: unused variable ‘nflag’
parmetis.c:98: 警告: unused variable ‘wflag’
parmetis.c: In function ‘__MlevelNestedDissectionP’:
parmetis.c:196: 警告: unused variable ‘j’
parmetis.c: In function ‘METIS_NodeComputeSeparator’:
parmetis.c:305: 警告: value computed is not used
parmetis.c:265: 警告: unused variable ‘j’
parmetis.c:265: 警告: unused variable ‘i’
parmetis.c: In function ‘METIS_EdgeComputeSeparator’:
parmetis.c:364: 警告: value computed is not used
parmetis.c:323: 警告: unused variable ‘j’
parmetis.c:323: 警告: unused variable ‘i’
parmetis.c: In function ‘METIS_mCPartGraphRecursive2’:
parmetis.c:394: 警告: value computed is not used
parmetis.c:386: 警告: unused variable ‘avgwgt’
parmetis.c:382: 警告: unused variable ‘j’
parmetis.c:382: 警告: unused variable ‘i’
SOURCE=estmem.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/estmem.o
estmem.c: In function ‘METIS_EstimateMemory’:
estmem.c:24: 警告: unused variable ‘k’
estmem.c:24: 警告: unused variable ‘j’
estmem.c:24: 警告: unused variable ‘i’
estmem.c: In function ‘__EstimateCFraction’:
estmem.c:102: 警告: implicit declaration of function ‘__GKfree’
estmem.c: In function ‘__ComputeCoarseGraphSize’:
estmem.c:113: 警告: unused variable ‘nedges’
SOURCE=mpmetis.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/mpmetis.o
mpmetis.c: In function ‘METIS_mCPartGraphRecursive’:
mpmetis.c:28: 警告: unused variable ‘j’
mpmetis.c:28: 警告: unused variable ‘i’
mpmetis.c: In function ‘METIS_mCHPartGraphRecursive’:
mpmetis.c:110: 警告: value computed is not used
mpmetis.c:125: 警告: implicit declaration of function ‘__GKfree’
mpmetis.c:82: 警告: unused variable ‘j’
mpmetis.c:82: 警告: unused variable ‘i’
mpmetis.c: In function ‘METIS_mCPartGraphRecursiveInternal’:
mpmetis.c:140: 警告: unused variable ‘j’
mpmetis.c:140: 警告: unused variable ‘i’
mpmetis.c: In function ‘METIS_mCHPartGraphRecursiveInternal’:
mpmetis.c:213: 警告: value computed is not used
mpmetis.c:188: 警告: unused variable ‘j’
mpmetis.c:188: 警告: unused variable ‘i’
mpmetis.c: In function ‘__MCMlevelRecursiveBisection’:
mpmetis.c:241: 警告: unused variable ‘ncon’
mpmetis.c:241: 警告: unused variable ‘j’
mpmetis.c: In function ‘__MCHMlevelRecursiveBisection’:
mpmetis.c:293: 警告: unused variable ‘j’
mpmetis.c: In function ‘__MCHMlevelEdgeBisection’:
mpmetis.c:385: 警告: unused variable ‘i’
SOURCE=mcoarsen.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/mcoarsen.o
SOURCE=mmatch.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/mmatch.o
mmatch.c: In function ‘__MCMatch_HEM’:
mmatch.c:81: 警告: unused variable ‘l’
SOURCE=minitpart.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/minitpart.o
minitpart.c: In function ‘__MocInit2WayPartition’:
minitpart.c:23: 警告: unused variable ‘i’
minitpart.c: In function ‘__MocGrowBisection’:
minitpart.c:89: 警告: value computed is not used
minitpart.c:96: 警告: value computed is not used
minitpart.c:98: 警告: implicit declaration of function ‘__GKfree’
minitpart.c:62: 警告: unused variable ‘mincut’
minitpart.c:62: 警告: unused variable ‘from’
minitpart.c:62: 警告: unused variable ‘ncon’
minitpart.c:62: 警告: unused variable ‘k’
minitpart.c:62: 警告: unused variable ‘j’
minitpart.c:62: 警告: unused variable ‘i’
minitpart.c: In function ‘__MocRandomBisection’:
minitpart.c:158: 警告: value computed is not used
minitpart.c:165: 警告: value computed is not used
minitpart.c:110: 警告: unused variable ‘mincut’
minitpart.c:110: 警告: unused variable ‘from’
minitpart.c:110: 警告: unused variable ‘k’
minitpart.c:110: 警告: unused variable ‘j’
minitpart.c: In function ‘__MocInit2WayBalance’:
minitpart.c:251: 警告: implicit declaration of function
‘SelectQueueOneWay’
minitpart.c:183: 警告: unused variable ‘me’
minitpart.c:183: 警告: unused variable ‘pass’
SOURCE=mbalance.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/mbalance.o
mbalance.c: In function ‘__MocGeneral2WayBalance’:
mbalance.c:38: 警告: unused variable ‘me’
mbalance.c:38: 警告: unused variable ‘pass’
SOURCE=mutil.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/mutil.o
SOURCE=mkmetis.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/mkmetis.o
mkmetis.c: In function ‘METIS_mCPartGraphKway’:
mkmetis.c:28: 警告: unused variable ‘j’
mkmetis.c:28: 警告: unused variable ‘i’
mkmetis.c: In function ‘__MCMlevelKWayPartitioning’:
mkmetis.c:117: 警告: value computed is not used
mkmetis.c:119: 警告: implicit declaration of function ‘__GKfree’
mkmetis.c:80: 警告: unused variable ‘nvtxs’
mkmetis.c:80: 警告: unused variable ‘j’
SOURCE=mkwayrefine.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/mkwayrefine.o
mkwayrefine.c: In function ‘__MocComputeKWayPartitionParams’:
mkwayrefine.c:90: 警告: unused variable ‘l’
mkwayrefine.c: In function ‘__MocProjectKWayPartition’:
mkwayrefine.c:259: 警告: value computed is not used
SOURCE=mkwayfmh.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/mkwayfmh.o
mkwayfmh.c: In function ‘__MCRandom_KWayEdgeRefineHorizontal’:
mkwayfmh.c:23: 警告: unused variable ‘l’
mkwayfmh.c:23: 警告: unused variable ‘jj’
mkwayfmh.c: In function ‘__MCGreedy_KWayEdgeBalanceHorizontal’:
mkwayfmh.c:260: 警告: unused variable ‘l’
mkwayfmh.c:260: 警告: unused variable ‘jj’
mkwayfmh.c:260: 警告: unused variable ‘iii’
mkwayfmh.c: In function ‘__IsHBalanceBetterFT’:
mkwayfmh.c:595: 警告: unused variable ‘k’
mkwayfmh.c:595: 警告: unused variable ‘j’
SOURCE=mrefine2.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/mrefine2.o
SOURCE=minitpart2.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/minitpart2.o
minitpart2.c: In function ‘__MocGrowBisection2’:
minitpart2.c:86: 警告: value computed is not used
minitpart2.c:93: 警告: value computed is not used
minitpart2.c:95: 警告: implicit declaration of function ‘__GKfree’
minitpart2.c:59: 警告: unused variable ‘mincut’
minitpart2.c:59: 警告: unused variable ‘from’
minitpart2.c:59: 警告: unused variable ‘ncon’
minitpart2.c:59: 警告: unused variable ‘k’
minitpart2.c:59: 警告: unused variable ‘j’
minitpart2.c:59: 警告: unused variable ‘i’
minitpart2.c: In function ‘__MocGrowBisectionNew2’:
minitpart2.c:134: 警告: value computed is not used
minitpart2.c:141: 警告: value computed is not used
minitpart2.c:110: 警告: unused variable ‘mincut’
minitpart2.c:110: 警告: unused variable ‘from’
minitpart2.c:110: 警告: unused variable ‘ncon’
minitpart2.c:110: 警告: unused variable ‘k’
minitpart2.c:110: 警告: unused variable ‘j’
minitpart2.c:110: 警告: unused variable ‘i’
minitpart2.c: In function ‘__MocInit2WayBalance2’:
minitpart2.c:158: 警告: unused variable ‘me’
minitpart2.c:158: 警告: unused variable ‘pass’
minitpart2.c: In function ‘__SelectQueueOneWay2’:
minitpart2.c:332: 警告: ‘imax’ may be used uninitialized in this
function
SOURCE=mbalance2.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/mbalance2.o
mbalance2.c: In function ‘__MocBalance2Way2’:
mbalance2.c:24: 警告: unused variable ‘i’
mbalance2.c: In function ‘__MocGeneral2WayBalance2’:
mbalance2.c:39: 警告: unused variable ‘me’
mbalance2.c:39: 警告: unused variable ‘pass’
SOURCE=mfm2.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/mfm2.o
mfm2.c: In function ‘__MocFM_2WayEdgeRefine2’:
mfm2.c:23: 警告: unused variable ‘me’
mfm2.c: In function ‘__IsBetter2wayBalance’:
mfm2.c:328: 警告: unused variable ‘j’
mfm2.c: In function ‘__SelectQueue2’:
mfm2.c:267: 警告: ‘max’ may be used uninitialized in this function
SOURCE=kvmetis.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/kvmetis.o
kvmetis.c: In function ‘METIS_WPartGraphVKway’:
kvmetis.c:47: 警告: unused variable ‘j’
kvmetis.c:47: 警告: unused variable ‘i’
kvmetis.c: In function ‘__MlevelVolKWayPartitioning’:
kvmetis.c:123: 警告: value computed is not used
kvmetis.c:125: 警告: implicit declaration of function ‘__GKfree’
kvmetis.c:97: 警告: unused variable ‘tpwgts2’
kvmetis.c:97: 警告: unused variable ‘tvwgt’
kvmetis.c:97: 警告: unused variable ‘nvtxs’
kvmetis.c:97: 警告: unused variable ‘j’
kvmetis.c:97: 警告: unused variable ‘i’
SOURCE=kwayvolrefine.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/kwayvolrefine.o
kwayvolrefine.c: In function ‘__RefineVolKWay’:
kwayvolrefine.c:76: 警告: implicit declaration of function ‘__GKfree’
kwayvolrefine.c: In function ‘__ComputeVolKWayPartitionParams’:
kwayvolrefine.c:136: 警告: unused variable ‘oedegrees’
kwayvolrefine.c:135: 警告: unused variable ‘orinfo’
kwayvolrefine.c:133: 警告: unused variable ‘pid’
kwayvolrefine.c:133: 警告: unused variable ‘minvol’
kwayvolrefine.c:133: 警告: unused variable ‘nbnd’
kwayvolrefine.c:133: 警告: unused variable ‘l’
kwayvolrefine.c:133: 警告: unused variable ‘kk’
kwayvolrefine.c:133: 警告: unused variable ‘ii’
kwayvolrefine.c: In function ‘__ComputeKWayVolGains’:
kwayvolrefine.c:241: 警告: suggest parentheses around + or - inside
shift
kwayvolrefine.c:215: 警告: unused variable ‘pid’
kwayvolrefine.c:215: 警告: unused variable ‘l’
kwayvolrefine.c: In function ‘__ProjectVolKWayPartition’:
kwayvolrefine.c:407: 警告: value computed is not used
SOURCE=kwayvolfm.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/kwayvolfm.o
kwayvolfm.c: In function ‘__Random_KWayVolRefine’:
kwayvolfm.c:151: 警告: implicit declaration of function ‘__GKfree’
kwayvolfm.c:23: 警告: unused variable ‘me’
kwayvolfm.c:22: 警告: unused variable ‘u’
kwayvolfm.c:22: 警告: unused variable ‘l’
kwayvolfm.c:22: 警告: unused variable ‘kk’
kwayvolfm.c:22: 警告: unused variable ‘jj’
kwayvolfm.c: In function ‘__Random_KWayVolRefineMConn’:
kwayvolfm.c:166: 警告: unused variable ‘u’
kwayvolfm.c:166: 警告: unused variable ‘kk’
kwayvolfm.c:166: 警告: unused variable ‘jj’
kwayvolfm.c: In function ‘__Greedy_KWayVolBalance’:
kwayvolfm.c:406: 警告: unused variable ‘gain’
kwayvolfm.c:406: 警告: unused variable ‘me’
kwayvolfm.c:405: 警告: unused variable ‘u’
kwayvolfm.c:405: 警告: unused variable ‘l’
kwayvolfm.c:405: 警告: unused variable ‘kk’
kwayvolfm.c:405: 警告: unused variable ‘jj’
kwayvolfm.c:405: 警告: unused variable ‘iii’
kwayvolfm.c: In function ‘__Greedy_KWayVolBalanceMConn’:
kwayvolfm.c:560: 警告: unused variable ‘gain’
kwayvolfm.c:559: 警告: unused variable ‘u’
kwayvolfm.c:559: 警告: unused variable ‘kk’
kwayvolfm.c:559: 警告: unused variable ‘jj’
kwayvolfm.c:559: 警告: unused variable ‘iii’
kwayvolfm.c: In function ‘__KWayVolUpdate’:
kwayvolfm.c:808: 警告: unused variable ‘l’
kwayvolfm.c:808: 警告: unused variable ‘iii’
kwayvolfm.c: In function ‘__ComputeKWayVolume’:
kwayvolfm.c:1163: 警告: suggest parentheses around + or - inside shift
kwayvolfm.c:1091: 警告: unused variable ‘pid’
kwayvolfm.c:1091: 警告: unused variable ‘l’
kwayvolfm.c: In function ‘__ComputeVolume’:
kwayvolfm.c:1182: 警告: unused variable ‘me’
kwayvolfm.c: In function ‘__CheckVolKWayPartitionParams’:
kwayvolfm.c:1222: 警告: unused variable ‘bndptr’
kwayvolfm.c:1222: 警告: unused variable ‘bndind’
kwayvolfm.c:1222: 警告: unused variable ‘pwgts’
kwayvolfm.c:1221: 警告: unused variable ‘minvol’
kwayvolfm.c:1221: 警告: unused variable ‘mincut’
kwayvolfm.c:1221: 警告: unused variable ‘nbnd’
kwayvolfm.c:1221: 警告: unused variable ‘l’
kwayvolfm.c: In function ‘EliminateVolComponents’:
kwayvolfm.c:1616: 警告: ‘me’ may be used uninitialized in this function
SOURCE=subdomains.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/subdomains.o
subdomains.c: In function ‘__Random_KWayEdgeRefineMConn’:
subdomains.c:24: 警告: unused variable ‘jj’
subdomains.c: In function ‘__Greedy_KWayEdgeBalanceMConn’:
subdomains.c:314: 警告: unused variable ‘jj’
subdomains.c:314: 警告: unused variable ‘iii’
subdomains.c: In function ‘__EliminateSubDomainEdges’:
subdomains.c:885: 警告: implicit declaration of function ‘__GKfree’
subdomains.c: In function ‘__MoveGroupMConn’:
subdomains.c:895: 警告: unused variable ‘myndegrees’
subdomains.c:895: 警告: unused variable ‘l’
subdomains.c:895: 警告: unused variable ‘jj’
subdomains.c: In function ‘__EliminateComponents’:
subdomains.c:1050: 警告: unused variable ‘other’
subdomains.c: In function ‘__MoveGroup’:
subdomains.c:1176: 警告: unused variable ‘myndegrees’
subdomains.c:1176: 警告: unused variable ‘l’
subdomains.c:1176: 警告: unused variable ‘jj’
subdomains.c: In function ‘__EliminateComponents’:
subdomains.c:1050: 警告: ‘me’ may be used uninitialized in this
function
SOURCE=mfm.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -DOMPI_SKIP_MPICXX
-I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/platforms/
linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/mfm.o
mfm.c: In function ‘__MocFM_2WayEdgeRefine’:
mfm.c:22: 警告: unused variable ‘me’
mfm.c: In function ‘__SelectQueue’:
mfm.c:240: 警告: ‘max’ may be used uninitialized in this function
SOURCE=memory.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/memory.o
memory.c: In function ‘__FreeWorkSpace’:
memory.c:89: 警告: implicit declaration of function ‘__GKfree’
SOURCE=mrefine.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/mrefine.o
mrefine.c: In function ‘__MocCompute2WayPartitionParams’:
mrefine.c:98: 警告: unused variable ‘other’
mrefine.c:93: 警告: unused variable ‘l’
mrefine.c:93: 警告: unused variable ‘k’
mrefine.c: In function ‘__MocProject2WayPartition’:
mrefine.c:213: 警告: value computed is not used
SOURCE=checkgraph.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/checkgraph.o
checkgraph.c: In function ‘__CheckGraph’:
checkgraph.c:124: 警告: implicit declaration of function ‘__GKfree’
'/home/ktech/OpenFOAM/OpenFOAM-1.6/lib/linuxGccDPOpt/openmpi-1.3.3/
libmetis-parmetis.so' is up to date.
+ wmake libso ParMETISLib
Making dependency list for source file comm.c
Making dependency list for source file util.c
Making dependency list for source file debug.c
Making dependency list for source file setup.c
Making dependency list for source file grsetup.c
Making dependency list for source file timer.c
Making dependency list for source file node_refine.c
Making dependency list for source file initmsection.c
Making dependency list for source file order.c
Making dependency list for source file xyzpart.c
Making dependency list for source file pspases.c
Making dependency list for source file frename.c
Making dependency list for source file iintsort.c
Making dependency list for source file iidxsort.c
Making dependency list for source file ikeysort.c
Making dependency list for source file ikeyvalsort.c
Making dependency list for source file kmetis.c
Making dependency list for source file gkmetis.c
Making dependency list for source file ometis.c
Making dependency list for source file initpart.c
Making dependency list for source file match.c
Making dependency list for source file coarsen.c
Making dependency list for source file kwayfm.c
Making dependency list for source file kwayrefine.c
Making dependency list for source file kwaybalance.c
Making dependency list for source file remap.c
Making dependency list for source file stat.c
Making dependency list for source file fpqueue.c
Making dependency list for source file ametis.c
Making dependency list for source file rmetis.c
Making dependency list for source file lmatch.c
Making dependency list for source file initbalance.c
Making dependency list for source file mdiffusion.c
Making dependency list for source file diffutil.c
Making dependency list for source file wave.c
Making dependency list for source file csrmatch.c
Making dependency list for source file redomylink.c
Making dependency list for source file balancemylink.c
Making dependency list for source file selectq.c
Making dependency list for source file akwayfm.c
Making dependency list for source file serial.c
Making dependency list for source file move.c
Making dependency list for source file mmetis.c
Making dependency list for source file mesh.c
Making dependency list for source file memory.c
Making dependency list for source file weird.c
Making dependency list for source file backcompat.c
SOURCE=comm.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/comm.o
SOURCE=util.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/util.o
SOURCE=debug.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/debug.o
SOURCE=setup.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/setup.o
SOURCE=grsetup.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/grsetup.o
grsetup.c: In function ‘ComputeMoveStatistics__’:
grsetup.c:273: 警告: implicit declaration of function ‘GKfree__’
SOURCE=timer.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/timer.o
SOURCE=node_refine.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/node_refine.o
node_refine.c: In function ‘KWayNodeRefine__’:
node_refine.c:355: 警告: implicit declaration of function ‘GKfree__’
SOURCE=initmsection.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/initmsection.o
initmsection.c: In function ‘InitMultisection__’:
initmsection.c:139: 警告: implicit declaration of function ‘GKfree__’
SOURCE=order.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/order.o
order.c: In function ‘MultilevelOrder__’:
order.c:93: 警告: implicit declaration of function ‘GKfree__’
SOURCE=xyzpart.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/xyzpart.o
xyzpart.c: In function ‘PartSort__’:
xyzpart.c:252: 警告: implicit declaration of function ‘GKfree__’
SOURCE=pspases.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/pspases.o
pspases.c: In function ‘ParMETIS_SerialNodeND’:
pspases.c:98: 警告: implicit declaration of function ‘GKfree__’
SOURCE=frename.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/frename.o
SOURCE=iintsort.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/iintsort.o
SOURCE=iidxsort.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/iidxsort.o
SOURCE=ikeysort.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/ikeysort.o
SOURCE=ikeyvalsort.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/ikeyvalsort.o
SOURCE=kmetis.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/kmetis.o
kmetis.c: In function ‘ParMETIS_V3_PartKway’:
kmetis.c:71: 警告: implicit declaration of function
‘METIS_WPartGraphKway’
kmetis.c:166: 警告: implicit declaration of function ‘GKfree__’
SOURCE=gkmetis.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/gkmetis.o
gkmetis.c: In function ‘ParMETIS_V3_PartGeomKway’:
gkmetis.c:75: 警告: implicit declaration of function
‘METIS_WPartGraphKway’
gkmetis.c:250: 警告: implicit declaration of function ‘GKfree__’
SOURCE=ometis.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/ometis.o
SOURCE=initpart.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/initpart.o
initpart.c: In function ‘Moc_InitPartition_RB__’:
initpart.c:191: 警告: implicit declaration of function ‘GKfree__’
SOURCE=match.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/match.o
match.c: In function ‘Moc_GlobalMatch_Balance__’:
match.c:308: 警告: implicit declaration of function ‘GKfree__’
SOURCE=coarsen.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/coarsen.o
coarsen.c: In function ‘Moc_Global_CreateCoarseGraph__’:
coarsen.c:481: 警告: implicit declaration of function ‘GKfree__’
SOURCE=kwayfm.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/kwayfm.o
kwayfm.c: In function ‘Moc_KWayFM__’:
kwayfm.c:591: 警告: implicit declaration of function ‘GKfree__’
SOURCE=kwayrefine.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/kwayrefine.o
SOURCE=kwaybalance.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/kwaybalance.o
kwaybalance.c: In function ‘Moc_KWayBalance__’:
kwaybalance.c:449: 警告: implicit declaration of function ‘GKfree__’
SOURCE=remap.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/remap.o
remap.c: In function ‘ParallelTotalVReMap__’:
remap.c:159: 警告: implicit declaration of function ‘GKfree__’
SOURCE=stat.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/stat.o
stat.c: In function ‘Moc_ComputeSerialBalance__’:
stat.c:52: 警告: implicit declaration of function ‘GKfree__’
SOURCE=fpqueue.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/fpqueue.o
SOURCE=ametis.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/ametis.o
ametis.c: In function ‘ParMETIS_V3_AdaptiveRepart’:
ametis.c:158: 警告: implicit declaration of function ‘GKfree__’
SOURCE=rmetis.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/rmetis.o
rmetis.c: In function ‘ParMETIS_V3_RefineKway’:
rmetis.c:152: 警告: implicit declaration of function ‘GKfree__’
SOURCE=lmatch.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/lmatch.o
lmatch.c: In function ‘Mc_LocalMatch_HEM__’:
lmatch.c:122: 警告: implicit declaration of function ‘GKfree__’
SOURCE=initbalance.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/initbalance.o
initbalance.c: In function ‘Balance_Partition__’:
initbalance.c:91: 警告: implicit declaration of function ‘GKfree__’
SOURCE=mdiffusion.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/mdiffusion.o
mdiffusion.c: In function ‘Moc_Diffusion__’:
mdiffusion.c:248: 警告: implicit declaration of function ‘GKfree__’
SOURCE=diffutil.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/diffutil.o
diffutil.c: In function ‘Mc_ComputeMoveStatistics__’:
diffutil.c:125: 警告: implicit declaration of function ‘GKfree__’
SOURCE=wave.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/wave.o
wave.c: In function ‘WavefrontDiffusion__’:
wave.c:237: 警告: implicit declaration of function ‘GKfree__’
SOURCE=csrmatch.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/csrmatch.o
csrmatch.c: In function ‘CSR_Match_SHEM__’:
csrmatch.c:86: 警告: implicit declaration of function ‘GKfree__’
SOURCE=redomylink.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/redomylink.o
redomylink.c: In function ‘RedoMyLink__’:
redomylink.c:172: 警告: implicit declaration of function ‘GKfree__’
SOURCE=balancemylink.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/balancemylink.o
balancemylink.c: In function ‘BalanceMyLink__’:
balancemylink.c:339: 警告: implicit declaration of function ‘GKfree__’
SOURCE=selectq.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/selectq.o
SOURCE=akwayfm.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/akwayfm.o
akwayfm.c: In function ‘Moc_KWayAdaptiveRefine__’:
akwayfm.c:621: 警告: implicit declaration of function ‘GKfree__’
SOURCE=serial.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/serial.o
serial.c: In function ‘Moc_SerialKWayAdaptRefine__’:
serial.c:223: 警告: implicit declaration of function ‘GKfree__’
SOURCE=move.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/move.o
SOURCE=mmetis.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/mmetis.o
mmetis.c: In function ‘ParMETIS_V3_PartMeshKway’:
mmetis.c:90: 警告: implicit declaration of function ‘GKfree__’
mmetis.c:28: 警告: unused variable ‘gnedges’
mmetis.c:28: 警告: unused variable ‘i’
SOURCE=mesh.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/mesh.o
mesh.c: In function ‘ParMETIS_V3_Mesh2Dual’:
mesh.c:327: 警告: implicit declaration of function ‘GKfree__’
SOURCE=memory.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/memory.o
memory.c: In function ‘FreeWSpace__’:
memory.c:50: 警告: implicit declaration of function ‘GKfree__’
SOURCE=weird.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/weird.o
weird.c: In function ‘PartitionSmallGraph__’:
weird.c:95: 警告: implicit declaration of function ‘GKfree__’
weird.c: In function ‘CheckInputs__’:
weird.c:115: 警告: unused variable ‘mgcnums’
SOURCE=backcompat.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
DOMPI_SKIP_MPICXX -I/home/ktech/OpenFOAM/ThirdParty-1.6/openmpi-1.3.3/
platforms/linuxGccDPOpt/include -IlnInclude -I. -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/ktech/OpenFOAM/
OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c $SOURCE -o Make/
linuxGccDPOptOPENMPI/backcompat.o
'/home/ktech/OpenFOAM/OpenFOAM-1.6/lib/linuxGccDPOpt/openmpi-1.3.3/
libparmetis.so' is up to date.
+ wmake libso ParMGridGen-1.0/MGridGen/IMlib
Making dependency list for source file blas.c
Making dependency list for source file dfkeysort.c
Making dependency list for source file file.c
Making dependency list for source file ifkeysort.c
Making dependency list for source file ifloatsort.c
Making dependency list for source file iintsort.c
Making dependency list for source file ikeysort.c
Making dependency list for source file memory.c
Making dependency list for source file sort.c
Making dependency list for source file util.c
SOURCE=blas.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -IlnInclude -I. -
I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/
ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c
$SOURCE -o Make/linuxGccDPOpt/blas.o
SOURCE=dfkeysort.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -IlnInclude
-I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/
ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c
$SOURCE -o Make/linuxGccDPOpt/dfkeysort.o
SOURCE=file.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -IlnInclude -I. -
I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/
ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c
$SOURCE -o Make/linuxGccDPOpt/file.o
SOURCE=ifkeysort.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -IlnInclude
-I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/
ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c
$SOURCE -o Make/linuxGccDPOpt/ifkeysort.o
SOURCE=ifloatsort.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -
IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/
lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/
lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/ifloatsort.o
SOURCE=iintsort.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -IlnInclude -
I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/
ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c
$SOURCE -o Make/linuxGccDPOpt/iintsort.o
SOURCE=ikeysort.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -IlnInclude -
I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/
ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c
$SOURCE -o Make/linuxGccDPOpt/ikeysort.o
SOURCE=memory.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -IlnInclude -
I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/
ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c
$SOURCE -o Make/linuxGccDPOpt/memory.o
SOURCE=sort.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -IlnInclude -I. -
I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/
ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c
$SOURCE -o Make/linuxGccDPOpt/sort.o
sort.c: In function ‘BucketSortKeysInc’:
sort.c:66: 警告: implicit declaration of function ‘IMfree’
sort.c: In function ‘BSearch’:
sort.c:106: 警告: control reaches end of non-void function
SOURCE=util.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -IlnInclude -I. -
I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude -I/home/
ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/lnInclude -fPIC -c
$SOURCE -o Make/linuxGccDPOpt/util.o
'/home/ktech/OpenFOAM/OpenFOAM-1.6/lib/linuxGccDPOpt/libIMlib.so' is
up to date.
+ wmake libso ParMGridGen-1.0/MGridGen/Lib
Making dependency list for source file aratio.c
Making dependency list for source file coarsen.c
Making dependency list for source file kwayfm.c
Making dependency list for source file match.c
Making dependency list for source file merge.c
Making dependency list for source file mgridgen.c
Making dependency list for source file refine.c
Making dependency list for source file setup.c
SOURCE=aratio.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../IMlib -
IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/
lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/
lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/aratio.o
SOURCE=coarsen.c ; gcc -m32 -Dlinux -DWM_DP -Wall -O3 -I../IMlib -
IlnInclude -I. -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/
lnInclude -I/home/ktech/OpenFOAM/OpenFOAM-1.6/src/OSspecific/POSIX/
lnInclude -fPIC -c $SOURCE -o Make/linuxGccDPOpt/coarsen.o
make: *** wait: No child processes. 中止.
make: *** 未完了のジョブを待っています....
make: *** wait: No child processes. 中止.

以上のログファイルとなっております。　これで宜しいのでしょうか？
また、foamInstllationTest を実行しましたが、走っているのか判断できません。　先ほど教わったようにログファイルを作成したとこ
ろ

bash: ./foamInstallationTest: No such file or directory

となってしまいます。　本当に度々で申し訳ないのですがご指導くださいますようお願い申し上げます。

On 11月25日, 午後3:36, IMANO Masashi <im...@arch.t.u-tokyo.ac.jp> wrote:
> 今野です。
>
> > #-------------------------------------------------------------------------------
> > #-------------------------------------------------------------------------------
>
> > export WM_PROJECT=OpenFOAM
> > export WM_PROJECT_VERSION=1.6
>
> > ###########################################################################-#####
> > # USER EDITABLE PART
> > #
> > # either set $FOAM_INST_DIR before sourcing this file or set
> > # $foamInstall below to where OpenFOAM is installed
> > #
> > # Location of FOAM installation
> > # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > foamInstall=$HOME/$WM_PROJECT
> > # foamInstall=~$WM_PROJECT
> > # foamInstall=/usr/local/$WM_PROJECT
> > # foamInstall=/opt/$WM_PROJECT
> > #
> > # END OF (NORMAL) USER EDITABLE PART
> > ###########################################################################-#####
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~-~
> > ------------------------------------------------------------------------------
> > cd
> > . $HOME/OpenFOAM/OpenFOAM-1.6/etc/bash

3gkl

unread,
Nov 25, 2009, 5:06:57 AM11/25/09
to OpenFOAM
今野　様

度々申し訳ございません。　先ほど添付したファイルが長すぎて最後まで表示されませんでした。
Allwmake に関しては、走ったように思います。　ですが、foamInstallTest を実施した時に、先ほどと同じメッセージが出ます。
　ファイルやディレクトリーが無いということです。
foamInstallTest はダブルクリックで走らせました。　それが間違いでしょうか？

再度ご指導ください。宜しくお願い申し上げます。

On 11月25日, 午後3:36, IMANO Masashi <im...@arch.t.u-tokyo.ac.jp> wrote:
> 今野です。
>
> > #-------------------------------------------------------------------------------
> > #-------------------------------------------------------------------------------
>
> > export WM_PROJECT=OpenFOAM
> > export WM_PROJECT_VERSION=1.6
>
> > ###########################################################################-#####
> > # USER EDITABLE PART
> > #
> > # either set $FOAM_INST_DIR before sourcing this file or set
> > # $foamInstall below to where OpenFOAM is installed
> > #
> > # Location of FOAM installation
> > # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > foamInstall=$HOME/$WM_PROJECT
> > # foamInstall=~$WM_PROJECT
> > # foamInstall=/usr/local/$WM_PROJECT
> > # foamInstall=/opt/$WM_PROJECT
> > #
> > # END OF (NORMAL) USER EDITABLE PART
> > ###########################################################################-#####
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~-~
> > ------------------------------------------------------------------------------
> > cd
> > . $HOME/OpenFOAM/OpenFOAM-1.6/etc/bash

IMANO Masashi

unread,
Nov 25, 2009, 5:15:31 AM11/25/09
to open...@googlegroups.com

今野です。

> foamInstallTest はダブルクリックで走らせました。　それが間違いでしょうか？

端末で

foamInstallationTest

と打って実行してください。

3gkl

unread,
Nov 25, 2009, 6:02:11 AM11/25/09
to OpenFOAM
今野　様

どうもありがとうございました。　なんとかインストール出来ました。　今後ともいろいろとご相談させてください。
Reply all
Reply to author
Forward
0 new messages