Issue #116: Implement surface tension in the PSD model (ESDLab/openfcst)
2 views
Skip to first unread message
AslanK
Feb 22, 2024, 2:16:41 PM2/22/24
to open...@googlegroups.com
New issue 116: Implement surface tension in the PSD model
https://bitbucket.org/ESDLab/openfcst/issues/116/implement-surface-tension-in-the-psd-model
Aslan Kosakian:
Surface tension \(Gamma\) is currently provided via the parameter file for the PSD model \(two-phase PEMFC model\). This has the following shortcomings:
* since it varies with operating temperature, it has to be modified manually;
* it should vary with temperature within the cell.
Therefore, a temperature-dependent surface tension of water should be implemented/added to the PSD model and the corresponding input parameter should be removed.
https://bitbucket.org/ESDLab/openfcst/issues/116/implement-surface-tension-in-the-psd-model
Aslan Kosakian:
Surface tension \(Gamma\) is currently provided via the parameter file for the PSD model \(two-phase PEMFC model\). This has the following shortcomings:
* since it varies with operating temperature, it has to be modified manually;
* it should vary with temperature within the cell.
Therefore, a temperature-dependent surface tension of water should be implemented/added to the PSD model and the corresponding input parameter should be removed.
Reply all
Reply to author
Forward
0 new messages