SOS: ERROR while installing OPEN-RELEASE/GINKGO.1 release

[dim kar]

Hello my friends,

While I installing the edx vesion of Ginkgo.1 the setup gives me the below error.  May you help me, please? I can't undestand what this error means.

Thanks in advance about your opinions.

[Trinh Nguyen]

Hi,

Is this the first time you run the installation script? It'll mostly fail if you reinstall. You'd better start with a fresh server.

Hope that will help,

Trinh Nguyen | Founder

E: dangt...@gmail.com | W: www.edlab.xyz

--
You received this message because you are subscribed to the Google Groups "Open edX operations" group.
To unsubscribe from this group and stop receiving emails from it, send an email to openedx-ops+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openedx-ops/a2804b8d-4c68-4782-a50f-91f27dab0f54%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[dim kar]

Hello Trinh,

Thanks you for your advice but yes it's a clean setup with a fresh server.

I can't understand what's matter. Have you or someone else another idea?

I would setup it again but i believe that this error will appear again.

Best Wishes,

DimKar

[Trinh Nguyen]

Look like the migration script cannot find /edx/etc/discovery.yml

How exactly did you install the stack?

Trinh Nguyen | Founder

E: dangt...@gmail.com | W: www.edlab.xyz

--
You received this message because you are subscribed to the Google Groups "Open edX operations" group.
To unsubscribe from this group and stop receiving emails from it, send an email to openedx-ops+unsubscribe@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/openedx-ops/d48c68f3-132b-4bcf-8056-0adaff8837cb%40googlegroups.com.

[dim kar]

I run it again and it occured another error which is the below:

new_error1.png

new_error2.png

[Trinh Nguyen]

So now you ran the installation on the old environment? Please try this instead:

1. Create a fresh server.

2. Run the following instead of your manual steps by steps:

# 1. Set the OPENEDX_RELEASE variable: export OPENEDX_RELEASE=open-release/ginkgo.1 # 2. Bootstrap the Ansible installation: wget https://raw.githubusercontent.com/edx/configuration/$OPENEDX_RELEASE/util/install/ansible-bootstrap.sh -O - | sudo bash # 3. (Optional) If this is a new installation, randomize the passwords: wget https://raw.githubusercontent.com/edx/configuration/$OPENEDX_RELEASE/util/install/generate-passwords.sh -O - | bash # 4. Install Open edX: wget https://raw.githubusercontent.com/edx/configuration/$OPENEDX_RELEASE/util/install/sandbox.sh -O - | bash

Trinh Nguyen | Founder

E: dangt...@gmail.com | W: www.edlab.xyz

--
You received this message because you are subscribed to the Google Groups "Open edX operations" group.
To unsubscribe from this group and stop receiving emails from it, send an email to openedx-ops+unsubscribe@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/openedx-ops/772b1788-3eb7-479f-ad7c-d9609753f449%40googlegroups.com.

[dim kar]

Hello Trinh,

I would like to thank you a lot about your advices and useful setup info. I attach the below photo to show you the my fresh Open Edx Gingko.1 that was installed successful.

Keep going on helping people fixing problems on Open edX :)